Search

This paper proposes a light, flexible, and yet reliable multiparametric estimation algorithm for grid-connected voltage-source-converter-based systems. This approach combines the nonlinear least squares (NLSQ) fitting algorithm and the steady-state extended harmonic domain (EHD) model to take into account the harmonic effects. The EHD model is used to take advantage of the harmonic content of the electrical signals to provide robustness and improved performance to the NLSQ estimation methodology. In addition, this harmonic formulation reduces the necessity of synchronized measurements. Details of the implementation are provided by an experimental case study, in which the grid equivalent (Thevenin voltage, inductance, and resistance), the ac-side filter (inductance and resistance), and the converter switching and conduction loss resistance are accurately estimated for three different operating conditions. [ABSTRACT FROM AUTHOR]

High penetration of wind power plants may have an adverse impact on power systems' stability by reducing the inertia, and problems like frequency stability could appear due to total inertia in the system being reduced, making the power system more vulnerable to disturbances. However, most recent grid codes include an emulation inertia requirement for wind power plants, because modern wind turbines are capable of providing virtual inertia through power electronic converter controls to improve frequency stability issues. Because of this, it is necessary that the inertia estimation analyze and quantify the impact of the inertia reduction in power systems. In this paper, an implementation of a methodology for the inertia estimation of wind power plants is presented. It is evaluated through synchrophasor measurements obtained from a Real-Time Digital Simulator (RTDS) implementation, using industrial Phasor Measurement Units (PMUs). This methodology is based on the swing equation. Furthermore, a comparison of the results obtained between two professional tools RSCAD and DIgSILENT PowerFactory is performed, in order to evaluate the accuracy and the robustness of the methodology. This methodology is applied for the inertia estimation of an equivalent of the southeast zone of the Mexican power system, where there is a large-scale penetration of wind power plants. The results demonstrate that this methodology can be applied in real power systems using PMUs. [ABSTRACT FROM AUTHOR]

The use of new generation devices based on renewable energy is a subject that increasingly becoming more important for the development of new distributed generation systems; one device developed for this purpose is the permanent magnet linear generator (PMLG). This work deals with the performance and power quality assessment of the PMLG under 2 different generation scenarios of microgeneration: the wave energy converter and the free piston engine linear generator. The performance of the PMLG is evaluated using the finite element method and experimental results under steady state condition of a 100-W prototype are presented to test and validate the proposed process design. The actuator displacement inside the PMLG was obtained from the equation that governs the movement of the 2 systems under study; this displacement was the excitation function used to conduct the simulation and the laboratory experiments. This work contributes to the design and development of power components devoted to microgeneration and creates the need for the modelling and development of power electronic converters for helping in control and power quality. [ABSTRACT FROM AUTHOR]

The growing penetration of generation systems based on renewable energy in electric power systems is undeniable. These generation systems have many benefits, but also many challenges from the technical point of view. One of the biggest problems in the case of solar photovoltaic (PV) and wind energy is the intermittency of the raw material, thus hybrid generation systems that contain both sources are being used to complement electric power generation. To analyze the problems of this type of hybrid generation systems, it is necessary to develop models and test systems that allows to study their dynamic behavior. Reported in this paper is the implementation of a full hybrid PV–wind generation system model in a real-time digital simulation platform, and the development of the electronic converter controls. These controllers were implemented in digital devices (Arduino Due) and connected to the simulation platform to test their performance in real-time. In addition, the procedure followed for the development and implementation of the controllers is presented. The proposed test system can be used in renewable energy integration studies and the development of new control strategies. [ABSTRACT FROM AUTHOR]