Search

• An endoscopy-based direct imaging system can monitor granules during fluidization. • A convolutional neural network-based software was applied for particle detection. • In-line particle size measurement was accomplished despite dense particle flow. • The in-line measurements and off-line reference methods showed similar trends. This paper presents a machine learning-based image analysis method to monitor the particle size distribution of fluidized granules. The key components of the direct imaging system are a rigid fiber-optic endoscope, a light source and a high-speed camera, which allow for real-time monitoring of the granules. The system was implemented into a custom-made 3D-printed device that could reproduce the particle movement characteristic in a fluidized-bed granulator. The suitability of the method was evaluated by determining the particle size distribution (PSD) of various granule mixtures within the 100–2000 μm size range. The convolutional neural network-based software was able to successfully detect the granules that were in focus despite the dense flow of the particles. The volumetric PSDs were compared with off-line reference measurements obtained by dynamic image analysis and laser diffraction. Similar trends were observed across the PSDs acquired with all three methods. The results of this study demonstrate the feasibility of performing real‐time particle size analysis using machine vision as an in-line process analytical technology (PAT) tool. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] In this work, the capabilities of a state-of-the-art fast Raman imaging apparatus are exploited to gain information about the concentration and particle size of hydroxypropyl methylcellulose (HPMC) in sustained release tablets. The extracted information is utilized to predict the in vitro dissolution profile of the tablets. For the first time, convolutional neural networks (CNNs) are used for the processing of the chemical images of HPMC distribution and to directly predict the dissolution profile based on the image. This new method is compared to wavelet analysis, which gives a quantification of the texture of HPMC distribution, carrying information regarding both concentration and particle size. A total of 112 training and 32 validation tablets were used, when a CNN was used to characterize the particle size of HPMC, the dissolution profile of the validation tablets was predicted with an average f 2 similarity value of 62.95. Direct prediction based on the image had an f 2 value of 54.2, this demonstrates that the CNN is capable of recognizing the patterns in the data on its own. The presented methods can facilitate a better understanding of the manufacturing processes, as detailed information becomes available with fast measurements. [ABSTRACT FROM AUTHOR]