Search

Achieving cost reduction in wave energy conversion is seen as essential to enabling the progress of the sector. At utility scale in a wave farm, multiple devices are likely to be deployed in array configurations. Closely spaced, compact wave energy converter (WEC) arrays are a promising option for cost reduction, realising synergies in operation and maintenance tasks and auxiliary installations, whilst achieving economies of scale. Mooring and anchorage systems are known to be a major component of the structural costs, and the use of interconnecting lines between neighbouring devices can reduce the number of anchors and minimise total line length. In this paper, we present the experimental study of different configurations of a five-device array of spar-buoy oscillating-water-column wave energy converters in a wave basin, focusing on the analysis of the power production performance. The study compares the performance of a single isolated device, an array with independently-moored devices and three arrays with inter-body connections, with different levels of connectivity in the mooring arrangement. Results show considerable performance implications linked to the interconnecting of devices, with the interconnected array configurations yielding a 75% increase in the annual energy extracted compared to the baseline (non-interconnected) arrangement. The performance enhancements are primarily attributed to the interconnecting moorings resulting in greater heave motion at higher frequencies for which the phase relationship between the water column and heave motion is more beneficial. Evidence is also presented that positive intra-array effects occur within interconnected arrays when the wavelength is equal to the array spacing. [ABSTRACT FROM AUTHOR]

The current cost of electricity has been preventing the technological progress of wave energy converters. The use of compact wave energy converters arrays is seen as a technological breakthrough for reducing these costs. These array configurations aim to maximize the energy extracted per unit area of marine space and to promote the sharing of components and installation, operation and maintenance tasks. Mooring lines are fundamental components in these systems and represent a considerable portion of the project cost. Reducing the number of mooring lines through the application of arrays with inter-body connections has a high potential for cost reduction. In this paper, we present the experimental study of different configurations of a five-device array of spar-buoy oscillating-water-column wave energy converters in a wave basin, focusing on the analysis of the devices motion and the mooring line loads. The study compares the performance of a single isolated device, an array with independently-moored devices and three arrays with inter-body connections, with different levels of connectivity in the mooring arrangement. Tests were carried out for moderate and extreme wave conditions. Results show good performance for all configurations when subjected to moderate sea conditions. Under extreme sea conditions, high peak tensions were observed in the lines of all array configurations. Particularly large values were detected in the inter-body lines, caused by their full extension. Based on these results, guidelines for the design of mooring systems for compact wave energy converter arrays are presented. • Wave-tank tests of five-device array configurations of spar-buoy OWCs are presented. • Line loads of independently-moored and inter-body connected arrays are evaluated. • Inter-body connected array shows reduction of 58% in line length and 73% in anchors. • Inter-body connected arrays presented the largest tensions under extreme waves. • Longer inter-body lines are expected to avoid high load peaks observed in the tests. [ABSTRACT FROM AUTHOR]