Search

This letter demonstrates an on-silicon integrated thin film coupled inductor using a novel cascade matrix concept to suit multiphase integrated voltage regulator (IVR) applications. The novel cascade matrix coupled (CMC) stripline inductor facilitates all-phase-coupled configuration to reduce the phase ripple current in IVRs. It also shows excellent scalability and neat floor planning. Moreover, the proposed CMC inductor uses double layer metal scheme for windings and interconnects, which significantly reduces the ac winding resistance. A four-phase CMC inductor has been successfully fabricated on-silicon substrate and characterized, which uses conventional thin film magnetic core deposition process to achieve in-plane magnetic uniaxial anisotropy. The device occupies 3.2 × 1.7 mm2 floor area and provides 19.5 nH phase inductance with 120 mΩ dc resistance. The saturation current for each phase is up to 0.4 A when the phase inductance drops by approximately 20%. The coupling coefficient between any two phases of the proposed CMC inductor is 0.27, much higher and more controllable than that of toroid core-based coupled inductors. [ABSTRACT FROM AUTHOR]

Coupled inductors offer significant advantages over their uncoupled counterparts; however, with these advantages come a number of additional design caveats. The factors affecting the design and optimization of coupled stripline microinductors for PwrSoC applications are outlined, which include device area, the number of coupled phases, duty cycle, paralleling of coupled inductors, switching frequency, as well as thermal and saturation constraints. Results of this analysis are presented and discussed along with guidelines for the design of coupled stripline microinductors, which show that paralleling coupled inductors is the best route toward higher output current. Analytical models predict a peak inductor efficiency of 86.8% and 86.3% for fabricated 3 and 5-phase coupled stripline microinductors with an Ni45Fe55 core, respectively. Models are verified by measurements on prototype 3 and 5-phase converters with parallel coupled stripline microinductors over a range of operating conditions. [ABSTRACT FROM AUTHOR]

In this paper, models that account for the duty cycle and phase shift angle of the applied phase voltages in coupled stripline microinductors are presented and are shown to have a significant impact on harmonic current amplitudes and therefore microinductor efficiency. The impact of a high coupling factor between two windings surrounded by a single core is also investigated. The models are validated using finite-element analysis and measurements. A three-phase-coupled microinductor has been fabricated with a Ni45Fe55 core and analyzed for a number of operating conditions. A prototype 1.6 W, three-phase converter utilizing this inductor has also been measured and is discussed in detail. The coupled microinductor is predicted to have a peak efficiency of 86.6% at 20 MHz in the prototype circuit. [ABSTRACT FROM AUTHOR]