Search

A finite-set model predictive control (FS-MPC) with coupling capacitor voltage observer scheme is proposed for thyristor-controlled LC-coupling hybrid active power filter (TCLC-HAPF) in this article. It ensures the fast transient response, low steady-state error, and good robustness under both inductive and capacitive load situations. Generally, the implementation of FS-MPC for TCLC-HAPF requires sensing of coupling capacitor voltage and thyristor-controlled reactor current in addition to sensing load voltage, load current, and compensation current, which increases the system complexity and cost. To relax this problem, the simplified predictive model is first proposed, thus reducing the required sensing signals and system order. Then, a coupling capacitor voltage observer is utilized to reduce the hardware costs, which can obtain a comparable performance with directly sensed capacitor voltage. The delay compensation is also considered for the control delay in practical realization. Finally, the effectiveness and performance of the FS-MPC with coupling capacitor voltage observer for TCLC-HAPF are verified by simulated and experimental results. [ABSTRACT FROM AUTHOR]

Single-phase traction transformers are widely used in traction power supply systems due to their characteristics such as a low cost and a simple structure. Railway power conditioners (RPCs) could increase the loading capacity of substations and improve the supply quality. In this paper, a hybrid RPC (HRPC) is applied to reduce reactive power, relieve system unbalance, and suppress harmonics. The operational voltage of the HRPC is much lower than that of a conventional RPC. A method named partial compensation was used to reduce the current rating of the RPC, in which the compensating currents are expressed as a function of the power factor target at the grid side. When this method is used in the HPRC, the operational voltage varies with the compensating currents over a wide range. A comprehensive design procedure is proposed so that both the current and voltage ratings of the HRPC are reduced with partial compensation. A reduction of more than 50% is achieved by compensating the power factor at the grid side to 0.95 instead of to unity. The control block diagram for the HRPC with partial compensation is presented. The design and control of the HRPC are validated by simulation and experimental results. [ABSTRACT FROM PUBLISHER]

In high-power applications, different multilevel voltage source converter (VSC) topologies are usually applied. The hybrid parallel multiconverters, which is a combination of multiactive and hybrid VSCs connecting in parallel, can be a promising solution in a high-power grid. In this article, the fusion VSC topology concept is proposed in which fusion VSC takes the advantages of both active (inductive coupling) VSC and hybrid (capacitive coupling) VSC. It corresponds to overcoming the insufficient-capacity problems when active VSCs are employed alone and vice versa. This article proposes fusion active power filter topology by combing active and hybrid power VSC through their equivalent model for power quality compensation. With the proposed VSC's equivalent model, it can reduce the converter rating by 17%–80% compared with the conventional approaches. Additionally, the corresponding control algorithm is proposed for the FAPF for power quality compensation. Finally, the simulation and real-time digital simulator hardware-in-the-loop experimental results of the proposed FAPF topology are given to demonstrate the validity and effectiveness for reducing its capacity and power loss compared with the conventional multi-VSC in power quality compensation. [ABSTRACT FROM AUTHOR]