Search

In this article, a time-efficient torque shaping technique for the switched reluctance machines is proposed to reduce the torque ripples while optimizing the copper loss. To reduce the computational time for solving the time-consuming bi-objective optimization problem, an efficient and desirable linear space for the SRM is utilized through the torque mapping between the linear space and nonlinear space. The feasible regions and properties of this torque mapping for SRM are studied in detail first. Then, based on this torque mapping, the current reference is generated by solving a convex optimization problem in the linear space and later converted to the current reference in nonlinear space. Compared to the traditional method that only adopts nonlinear space, the proposed current reference generation method requires less than 10% of the time. Furthermore, the proposed method saves more than 70% time consumed by the traditional method for the bi-objective optimization problem but possesses the similar torque ripple reduction performance. The effectiveness of the proposed method has been verified by extensive simulation and experimental tests on a four-phase 5.1 kW 8/6 SRM setup. [ABSTRACT FROM AUTHOR]

The article proposes a nonlinear state observer (NSO) for robust position-sensorless control of switched reluctance motor (SRM) drives over medium- and high-speed range. A classical reference flux-linkage method is adopted to capture a feature position of the SRM, which avoids the use of 3-D magnetic characteristics and has better universality. However, the estimation accuracy of this method would be deteriorated due to flux-linkage errors. To ease the problem, the NSO is developed to enhance the robustness against flux-linkage distortions for more accurate position and speed estimation. This observer can first reconstruct complete position information from a low-resolution feature position. The adverse impact of flux-linkage errors on position estimation is then investigated through a novel small-signal approximation and suppressed by an augmented state estimator. Afterward, a parameter design scheme is given to ensure the observer's stability and improve the capability in distortion suppression. To baseline the performance, comparative experimental validation between the proposed NSO and a widely used linear prediction method is conducted on a 12/8 SRM setup. The results show that the proposed strategy can improve the overall position-sensorless control performance in both the steady and transient states. [ABSTRACT FROM AUTHOR]

This paper proposes a novel dynamic torque estimation method, which can quickly and accurately obtain the instantaneous torque with an online calculation based on the local linearization of the energy conversion loop on the flux linkage-current plane of the switched reluctance machine. According to the real-time information of the points on the loop, six situations are illustrated and analyzed. For each situation, the output mechanical energy is obtained first by calculating the area of the corresponding segmented regions, and then, the instantaneous torque is obtained by the difference algorithm concerning the output mechanical energy and rotor position. For the entire process, the unsaturated phase inductance of the machine, which can be conveniently measured, is the only information required in advance. To verify the effectiveness of the proposed method, detailed simulations and experiments are performed under different operating conditions. [ABSTRACT FROM PUBLISHER]