Search

A 6 Gb/s 9.8 pJ/b rotatable non-contact connector applicable to industrial robot arms is developed. The proposed non-contact connector enables a high-speed and highly reliable wireless data connection between three-dimensional (3-D) cameras and an edge computer in an autonomously controlled robot. A rotatable transmission line coupler (RTLC) is proposed to accommodate the rotational operation of the robot arm. Since the proposed doughnut-shaped RTLC has a constant overlapped area at any rotation angle, the RTLC has a constant coupling gain at all rotation angles. To remove inter-symbol interference (ISI) occurring at a specific rotation angle, a pulse-equalizing receiver is also developed. An interface bridge IC is proposed to transfer a wide range of interface signals from a slow-control signal such as the control area network (CAN) to a high-speed video interface signal. A signal protocol conversion technique applying on-off keying (OOK) modulation is also developed in order to transfer slow legacy interfaces used in the robot arms that include a dc component. Experiments with a test chip fabricated in a 40 nm CMOS process confirmed that bit error rate (BER) was lower than 10 $^{-12}$ at any rotation angle in a communication distance of 3 mm. The proposed system improves energy efficiency by a factor of 3.7, area efficiency by a factor of 1.8. [ABSTRACT FROM AUTHOR]

QUEST is a programmable multiple instruction, multiple data (MIMD) parallel accelerator for general-purpose state-of-the-art deep neural networks (DNNs). It features die-to-die stacking with three-cycle latency, 28.8 GB/s, 96 MB, and eight SRAMs using an inductive coupling technology called the ThruChip interface (TCI). By stacking the SRAMs instead of DRAMs, lower memory access latency and simpler hardware are expected. This facilitates in balancing the memory capacity, latency, and bandwidth, all of which are in demand by cutting-edge DNNs at a high level. QUEST also introduces log-quantized programmable bit-precision processing for achieving faster (larger) DNN computation (size) in a 3-D module. It can sustain higher recognition accuracy at a lower bitwidth region compared to linear quantization. The prototype QUEST chip is integrated in the 40-nm CMOS technology, and it achieves 7.49 tera operations per second (TOPS) peak performance in binary precision, and 1.96 TOPS in 4-bit precision at 300-MHz clock. [ABSTRACT FROM AUTHOR]

A non-contact interface for modular smartphones that can provide a data connection at a maximum MIPI rate of 6 Gb/s has been developed. A two-fold transmission line coupler, which is a small-size coupler that has a wide bandwidth, is proposed for modular smartphones, where the layout area is strictly limited. The coupler size is 6 mm2 for a 5 mm communication distance, which is 1/24 smaller than the conventional coupler. Since many wireless communication components, such as LTE, WiFi, and GPS transceivers, are assembled in a small module, the interference between the non-contact interface and the wireless transceivers should be suppressed. To improve noise immunity and reduce unwanted radiation from the coupler, an electromagnetic-compatibility robust pulse transceiver is proposed. A synchronous receiver using an edge counting clock recovery circuit improves noise immunity, and a bi-phase pulse transmitter reduces noise radiation in the GPS band. There is no EMS by LTE or WiFi signals on the data connection at BER < 10^-12 when the coupler is separated by a distance of 2 mm and no EMI on GPS signals at a separation of 10 mm. Compared with the state-of-the-art result, the highest energy efficiency (6 pJ/b) and space efficiency (1.2 \textmm^2/1 \textmm distance) is achieved. [ABSTRACT FROM PUBLISHER]

A blind source separation (BSS) is proposed to reject the crosstalk between inductive-coupling channels in 3-D systems. The phase and permutation ambiguities inherent to BSS are compensated for in the proposed technique. A continuous-time natural gradient BSS with integrator output swing bounding, which is amenable for high-speed implementation, is also proposed. Techniques to reduce the implementation complexity for a large channel array are presented. The proposed technique shows substantial improvement results for crosstalk rejection in a high-crosstalk-coupling environment. In addition, for a 3 \times 3 array channel with 1 Gb/s/channel, with a crosstalk-to-signal ratio of -3 dB, a bit-error rate of 10^-11 is obtained compared to 10^-4 without BSS. [ABSTRACT FROM PUBLISHER]

A noncontact and housing-less thin–thick connecting method was developed for mobile industry processor interface (MIPI) applications. This paper describes the world's first 0.15-mm-thick connector using a vertical directional coupler (VDC) which enables simultaneous two-link communication with one coupler without fatal performance degradation. We have analyzed the conditions for isolating two links in a coupler, and the design method is discussed. A fully balanced pulse transmitter implemented in 90-nm CMOS technology significantly suppressed electromagnetic interference (EMI), which agrees well with MIPI requirements. An experimental liquid crystal display interface system reached a maximum data rate of 2.3 Gb/s/link at a bit error rate of less than 10^-12 and a power consumption of 1.47~pJ/b. The timing margin of single link was 320 ps (=64% U.I.) and of two links was 305 ps (=61% U.I.) at 2.0 Gb/s. [ABSTRACT FROM AUTHOR]