Search

The coexistence of coronavirus disease 2019 (COVID-19) and pulmonary embolism (PE), two life-threatening illnesses, in the same patient presents a unique challenge. Guidelines have delineated how best to diagnose and manage patients with PE. However, the unique aspects of COVID-19 confound both the diagnosis and treatment of PE, and therefore require modification of established algorithms. Important considerations include adjustment of diagnostic modalities, incorporation of the prothrombotic contribution of COVID-19, management of two critical cardiorespiratory illnesses in the same patient, and protecting patients and health-care workers while providing optimal care. The benefits of a team-based approach for decision-making and coordination of care, such as that offered by pulmonary embolism response teams (PERTs), have become more evident in this crisis. The importance of careful follow-up care also is underscored for patients with these two diseases with long-term effects. This position paper from the PERT Consortium specifically addresses issues related to the diagnosis and management of PE in patients with COVID-19. [ABSTRACT FROM AUTHOR]

This study aims to use a paper-based sensor array for point-of-care detection of COVID-19 diseases. Various chemical compounds such as nanoparticles, organic dyes and metal ion complexes were employed as sensing elements in the array fabrication, capturing the metabolites of human serum samples. The viral infection caused the type and concentration of serum compositions to change, resulting in different color responses for the infected and control samples. For this purpose, 118 serum samples of COVID-19 patients and non-COVID controls both men and women with the age range of 14–88 years were collected. The serum samples were initially subjected to the sensor, followed by monitoring the variation in the color of sensing elements for 5 min using a scanner. By taking into consideration the statistical information, this method was capable of discriminating COVID-19 patients and control samples with 83.0% accuracy. The variation of age did not influence the colorimetric patterns. The desirable correlation was observed between the sensor responses and viral load values calculated by the PCR test, proposing a rapid and facile way to estimate the disease severity. Compared to other rapid detection methods, the developed assay is cost-effective and user-friendly, allowing for screening COVID-19 diseases reliably. [Display omitted] • An optoelectronic tongue was fabricated by non-specific receptors for detection of serum metabolites. • The sensor was used to discriminate patients infected by COVID-19 from healthy controls. • The discrimination analysis was achieved by comparison between the total responses of patient and healthy classes. • The severity of the disease and the viral load associated with PCR analysis were estimated. [ABSTRACT FROM AUTHOR]

The coronavirus disease 2019 (COVID-19) pandemic of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection is causing considerable morbidity and mortality worldwide. Multiple reports have suggested that patients with heart failure (HF) are at a higher risk of severe disease and mortality with COVID-19. Moreover, evaluating and treating HF patients with comorbid COVID-19 represents a formidable clinical challenge as symptoms of both conditions may overlap and they may potentiate each other. Limited data exist regarding comprehensive management of HF patients with concomitant COVID-19. Since these issues pose serious new challenges for clinicians worldwide, HF specialists must develop a structured approach to the care of patients with COVID-19 and be included early in the care of these patients. Therefore, the Heart Failure Association of the European Society of Cardiology and the Chinese Heart Failure Association & National Heart Failure Committee conducted web-based meetings to discuss these unique clinical challenges and reach a consensus opinion to help providers worldwide deliver better patient care. The main objective of this position paper is to outline the management of HF patients with concomitant COVID-19 based on the available data and personal experiences of physicians from Asia, Europe and the United States. [ABSTRACT FROM AUTHOR]

Real-time reverse transcriptase-polymerase chain reaction (RT-PCR)-based assays are the gold standard for virus diagnosis. Point-of-care (POC) technologies have shown great progress during this period. Herein, we propose a novel fuchsine dye-loaded polymersome for a colorimetric paper-based dot blot spike protein diagnostic assay for COVID-19 via smartphone-assisted sensing. The prepared platform aimed to create an adaptable tool that competes with traditional nanoparticle-based assays employing gold and silver. Analytical characterization and application of the testing platform showed high sensitivity (10 times better than gold nanoparticles), stability, fast turnaround, and reproducibility. The potential and possibilities demonstrated by the current platform could be observed in its adaptability for different markers and pathologies. In addition, smartphone-assisted sensing emphasizes the ability to use the tool at home by common peoples which can lower the burden on the healthcare facilities and reach more underdeveloped regions. • Facile, quick, and sensitive colorimetric paper-based biosensor for COVID-19. • Platform is based on functionalized dye-loaded polymersome. • Polymersomes were more sensitive than silver-enhanced gold nanoparticles. • Higher stability, repeatability, and reproducibility. • The biosensor is adjustable for other diseases. [ABSTRACT FROM AUTHOR]

The microfluidic paper-based analytical devices (μPADs) have grown-up swiftly over the decade due to its low cost, simple fabrication procedure, resource-limitedness, non-toxicity and their environmentally benign nature. The μPADs, also identified as point-of-care devices or health care devices have successfully applied in several fields such as diagnostics, biological, food safety, environmental, electrochemical and most importantly colorimetric/fluorimetric sensors, owing to the attractive passive motions of analyte without any external forces. In recent years, a large number of colorimetric and fluorimetric probes have been reported that can selectively recognize the analytes in μPADs. However, there is no organized review on its structure-activity relationship. In this review, we have focused to summarize the colorimetric and fluorimetric probes utilized in μPADs. This review discuss about the relationships between the structure and functions of various probes as signaling units of the efficient μPADs. The probes including nanomaterials, nanozymes, polymers and organic molecules, their structural activity with regard to sensing performances along with their limit of detection are also discussed. This review is expected to assist readers for better understanding of the sensing mechanisms of various chemo and bio-probes utilized in μPADs, as well as promote their advancement in the field. On the other hand, this review also helps the researchers for enhancement of μPADs and paves way for synergistic application of existing molecular probes as an effective diagnostic tool for the worldwide pandemic novel corona virus COVID-19. [Display omitted] • Traditional fabrications methods for µPADs are summarized. • Discusses about the hindrances of commercial wax printing method for fabrication of µPADs. • Various sensory materials are categorized and discussed along with their structure activity properties. • Highlights about the most promising material that could be a probable probe for µPADs. • The vision towards employing µPADs for COVID19 diagnosis is also discussed. [ABSTRACT FROM AUTHOR]

Background: The COVID‐19 pandemic impacted on the provision of care and routine activity of all National Health Service (NHS) services. While General Practitioner referrals to memory services in England have returned to pre‐pandemic levels, the estimated dementia diagnosis rate (DDR) fell by 5.4% between March 2020 and February 2023. Methods: In this paper we explore whether this reduction is accurate or is an artefact of the way the NHS collects data. Results: We explore the processes that may have affected national dementia diagnosis rates during and following the COVID‐19 pandemic. Conclusions: We discuss what action could be taken to improve the DDR in the future. Key points: Despite General Practitioner (GP) referrals to memory services in England returning to levels seen before the pandemic, there was a decline of 5.4% in the estimated dementia diagnosis rate (DDR) from March 2020 to February 2023.This paper explores the factors which may have affected the national DDR reduction. These include a backlog in dementia referrals, a reduction in coding of diagnoses, or a decrease in true dementia prevalence secondary to excess COVID‐19 deaths which has yet to be reflected in the DDR denominator.Further work is suggested to accurately capture dementia prevalence in the United Kingdom (UK). These include an up‐to‐date multicentre population‐based cohort study and adjusting the DDR denominator for factors known to affect dementia susceptibility such as deprivation, rurality, and ethnicity. [ABSTRACT FROM AUTHOR]

Since 2020, novel coronavirus pneumonia has been spreading rapidly around the world, bringing tremendous pressure on medical diagnosis and treatment for hospitals. Medical imaging methods, such as computed tomography (CT), play a crucial role in diagnosing and treating COVID-19. A large number of CT images (with large volume) are produced during the CT-based medical diagnosis. In such a situation, the diagnostic judgement by human eyes on the thousands of CT images is inefficient and time-consuming. Recently, in order to improve diagnostic efficiency, the machine learning technology is being widely used in computer-aided diagnosis and treatment systems (i.e., CT Imaging) to help doctors perform accurate analysis and provide them with effective diagnostic decision support. In this paper, we comprehensively review these frequently used machine learning methods applied in the CT Imaging Diagnosis for the COVID-19, discuss the machine learning-based applications from the various kinds of aspects including the image acquisition and pre-processing, image segmentation, quantitative analysis and diagnosis, and disease follow-up and prognosis. Moreover, we also discuss the limitations of the up-to-date machine learning technology in the context of CT imaging computer-aided diagnosis. [ABSTRACT FROM AUTHOR]

Covid-19 is a very dangerous disease as a result of the rapid and unprecedented spread of any previous disease. It is truly a crisis that threatens the world since its first appearance in December 2019 until our time. Due to the lack of a vaccine that has proved sufficiently effective so far, the rapid and more accurate diagnosis of this disease is extremely necessary to enable the medical staff to identify infected cases and isolate them from the rest to prevent further loss of life. In this paper, Covid-19 diagnostic strategy (CDS) as a new classification strategy that consists of two basic phases: Feature selection phase (FSP) and diagnosis phase (DP) has been introduced. During the first phase called FSP, the best set of features in laboratory test findings for Covid-19 patients will be selected using enhanced gray wolf optimization (EGWO). EGWO combines both types of selection techniques called wrapper and filter. Accordingly, EGWO includes two stages called filter stage (FS) and wrapper stage (WS). While FS uses many different filter methods, WS uses a wrapper method called binary gray wolf optimization (BGWO). The second phase called DP aims to give fast and more accurate diagnosis using a hybrid diagnosis methodology (HDM) based on the selected features from FSP. In fact, the HDM consists of two phases called weighting patient phase (WP2) and diagnostic patient phase (DP2). WP2 aims to calculate the belonging degree of each patient in the testing dataset to class category using naïve Bayes (NB) as a weight method. On the other hand, K-nearest neighbor (KNN) will be used in DP2 based on the weights of patients in the testing dataset as a new training dataset to give rapid and more accurate detection. The suggested CDS outperforms other strategies according to accuracy, precision, recall (or sensitivity) and F-measure calculations that are equal to 99%, 88%, 90% and 91%, respectively, as showed in experimental results. [ABSTRACT FROM AUTHOR]

Researchers and scientists can use computational-based models to turn linked data into useful information, aiding in disease diagnosis, examination, and viral containment due to recent artificial intelligence and machine learning breakthroughs. In this paper, we extensively study the role of artificial intelligence and machine learning in delivering efficient responses to the COVID-19 pandemic almost four years after its start. In this regard, we examine a large number of critical studies conducted by various academic and research communities from multiple disciplines, as well as practical implementations of artificial intelligence algorithms that suggest potential solutions in investigating different COVID-19 decision-making scenarios. We identify numerous areas where artificial intelligence and machine learning can impact this context, including diagnosis (using chest X-ray imaging and CT imaging), severity, tracking, treatment, and the drug industry. Furthermore, we analyse the dilemma's limits, restrictions, and hazards. [ABSTRACT FROM AUTHOR]

Coronavirus is one of the serious threat and challenge for existing healthcare systems. Several prevention methods and precautions have been proposed by medical specialists to treat the virus and secure infected patients. Deep learning methods have been adopted for disease detection, especially for medical image classification. In this paper, we proposed a deep learning-based medical image classification for COVID-19 patients namely deep learning model for coronavirus (DLM-COVID-19). The proposed model improves the medical image classification and optimization for better disease diagnosis. This paper also proposes a mobile application for COVID-19 patient detection using a self-assessment test combined with medical expertise and diagnose and prevent the virus using the online system. The proposed deep learning model is evaluated with existing algorithms where it shows better performance in terms of sensitivity, specificity, and accuracy. Whereas the proposed application also helps to overcome the virus risk and spread. [ABSTRACT FROM AUTHOR]

The recent pandemic caused by the Coronavirus Disease (COVID-19) first surfaced in Wuhan, China in December 2019. This paper presents an expert system for the diagnosis of COVID-19 based on its symptoms to aid people in taking precautionary measures. When experts are not available, an expert system that can effectively diagnose the disease is crucial. It takes the place of one or more experts in decision-making and problem-solving. An expert system for diagnosis of COVID-19 is a system developed to recognize early COVID-19 symptoms that individuals may experience by allowing users to directly check the disease with results that can serve as a foundation for additional testing. This study's primary goal is to identify useful COVID-19 detection patterns or knowledge by examining the historical data we have obtained from the Kaggle dataset. The patterns are presented as rules, which are given to the expert system after consultation with a domain expert. A total of 1,048,575 pieces of data were used for model training and testing. To detect COVID-19 disease, we employ a PART rule-based algorithm, which performed 92.47% accurately in a 10-fold cross-validation test. We can therefore draw the conclusion that the algorithm produces a promising result and that the expert system aids in the diagnosis of the disease. The system offers a suggestion in line with the identified symptom. [ABSTRACT FROM AUTHOR]

Artificial neural networks (ANNs) ability to learn, correct errors, and transform a large amount of raw data into beneficial medical decisions for treatment and care has increased in popularity for enhanced patient safety and quality of care. Therefore, this paper reviews the critical role of ANNs in providing valuable insights for patients' healthcare decisions and efficient disease diagnosis. We study different types of ANNs in the existing literature that advance ANNs' adaptation for complex applications. Specifically, we investigate ANNs' advances for predicting viral, cancer, skin, and COVID-19 diseases. Furthermore, we propose a deep convolutional neural network (CNN) model called ConXNet, based on chest radiography images, to improve the detection accuracy of COVID-19 disease. ConXNet is trained and tested using a chest radiography image dataset obtained from Kaggle, achieving more than 97% accuracy and 98% precision, which is better than other existing state-of-the-art models, such as DeTraC, U-Net, COVID MTNet, and COVID-Net, having 93.1%, 94.10%, 84.76%, and 90% accuracy and 94%, 95%, 85%, and 92% precision, respectively. The results show that the ConXNet model performed significantly well for a relatively large dataset compared with the aforementioned models. Moreover, the ConXNet model reduces the time complexity by using dropout layers and batch normalization techniques. Finally, we highlight future research directions and challenges, such as the complexity of the algorithms, insufficient available data, privacy and security, and integration of biosensing with ANNs. These research directions require considerable attention for improving the scope of ANNs for medical diagnostic and treatment applications. [ABSTRACT FROM AUTHOR]

COVID-19 is a dangerous disease that directly damages human health, with the properties of severely contagious and highly variable. It is endangering the health and safety of people all around the world. Thus, it compels governments to seek rapid detection, diagnosis and treatment, and epidemic forecasting approaches under the consumption of considerable human resources, material, and financial resources, for the purpose of curbing its development. In view of diverse merits, such as flexibility, rapidity, and non-intrusion, artificial intelligence (AI) techniques have unparalleled advantages in the rapid, non-contact auxiliary diagnosis and epidemic prediction of COVID-19. This paper reviews the AI's technical advances and clinical applications in the COVID-19 epidemic, including computer-aided diagnosis and epidemic prediction, especially the pipelines of medical imaging and analytical techniques. The survey aims to comprehensively investigate the application of AI technologies in the fight against the epidemic and attempt to organize related works in a globally understandable way. This survey also summarizes current challenging issues in the diagnosis and prediction of COVID-19 with AI technologies and puts forward some suggestions for future work. [ABSTRACT FROM AUTHOR]

It has been validated beyond doubt that High-Resolution Computed Tomography (HRCT) chest and to some extent chest radiographs have a role in corona virus disease-19 (COVID-19). Much less is known about the role of lung ultrasonography (LUS) in COVID-19. In this paper, our main purpose was to gauge the relationship between LUS and chest HRCT in reverse transcriptase polymerase chain reaction (RT–PCR) documented cases of COVID-19, as well as in those with high suspicion of COVID-19 with negative RT–PCR. It was a prospective study carried out at our tertiary care hospital, namely, SKIMS Soura. The total number of patients in this study were 152 (200 patients were selected out of which only 152 had undergone both LUS and chest HRCT). The patients were subjected to both LUS and chest HRCT. The radiologist who performed LUS was blinded to clinical findings and HRCT was evaluated by a radiologist with about a decade of experience. The LUS findings compatible with the disease were subpleural consolidations, B-lines and irregular pleural lines. Findings that were compatible with COVID-19 on chest HRCT were bibasilar, subpleural predominant ground glass opacities, crazy paving and consolidations. COVID-19-positive patients were taken up for chest HRCT for disease severity stratification and were also subjected to LUS. On HRCT chest, the imaging abnormalities compatible with COVID-19 were evident in 110 individuals (72.37%), and on Lung Ultrasound they were observed in 120 individuals (78.95%). Imaging of COVID-19 patients assessed by both LUS and HRCT chest,, showed a positive correlation (p < 0.0001). The study revealed a sensitivity of 88%, a specificity of 76.62%, a positive predictive value of 78.57% and a negative predictive value of 86.76%. None of the individuals with a diagnosis of COVID-19 on HRCT were missed on LUS. An excellent correlation was derived between the LUS score and CT total severity score (p < 0.0001 with a kappa of 0.431). Similar precision compared with chest HRCT in the detection of chest flaws in COVID-19 patients was obtained on LUS. [ABSTRACT FROM AUTHOR]

The novel coronavirus (COVID-19) pandemic still has a significant impact on the worldwide population's health and well-being. Effective patient screening, including radiological examination employing chest radiography as one of the main screening modalities, is an important step in the battle against the disease. Indeed, the earliest studies on COVID-19 found that patients infected with COVID-19 present with characteristic anomalies in chest radiography. In this paper, we introduce COVID-ConvNet, a deep convolutional neural network (DCNN) design suitable for detecting COVID-19 symptoms from chest X-ray (CXR) scans. The proposed deep learning (DL) model was trained and evaluated using 21,165 CXR images from the COVID-19 Database, a publicly available dataset. The experimental results demonstrate that our COVID-ConvNet model has a high prediction accuracy at 97.43% and outperforms recent related works by up to 5.9% in terms of prediction accuracy. [ABSTRACT FROM AUTHOR]

Novel coronavirus (COVID-19) pandemic, has raised a serious situation across world human population and has become serious threat as contagious outbreak. This paper aims to overview the recently intelligent systems based on Artificial Intelligence using different medical imaging modalities like Computer Tomography (CT) and X-ray. This paper specifically discusses the machine learning techniques developed for COVID-19 diagnosis and provides insights on well-known data sets used to train these AI based networks. It also highlights the use of AI in COVID detection and classification at faster process where normal COVID testing takes couple of days to produce. Finally, we conclude by addressing the challenges associated with the use of Machine Leaming methods for COVID-19 detection and probable future trends in this research area. This paper is intended to provide experts (medical or otherwise) and technicians with new insights into the ways machine learning techniques are used and how they potentially further work in com batting the outbreak of CO VID-19. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has sparked a barrage of primary research and reviews. We investigated the publishing process, time and resource wasting, and assessed the methodological quality of the reviews on artificial intelligence techniques to diagnose COVID-19 in medical images. We searched nine databases from inception until 1 September 2020. Two independent reviewers did all steps of identification, extraction, and methodological credibility assessment of records. Out of 725 records, 22 reviews analysing 165 primary studies met the inclusion criteria. This review covers 174,277 participants in total, including 19,170 diagnosed with COVID-19. The methodological credibility of all eligible studies was rated as critically low: 95% of papers had significant flaws in reporting quality. On average, 7.24 (range: 0–45) new papers were included in each subsequent review, and 14% of studies did not include any new paper into consideration. Almost three-quarters of the studies included less than 10% of available studies. More than half of the reviews did not comment on the previously published reviews at all. Much wasting time and resources could be avoided if referring to previous reviews and following methodological guidelines. Such information chaos is alarming. It is high time to draw conclusions from what we experienced and prepare for future pandemics. [ABSTRACT FROM AUTHOR]

Abstract A growing number of scientific contributions suggest that COVID-19 infection can lead to impairment of cognition, mainly in executive functions and memory domains, even in the absence of frank neurological pathologies.The primary objective of this retrospective study is to evaluate the frequency and type of inefficiencies in a selection of cognitive tests administered to a sample of subjects who, following infection, required invasive assisted ventilation and were admitted to rehabilitation wards for the treatment of functional impairment.Fifty-seven subjects were enrolled. The recruited patients undergone an assessment of verbal and visuospatial memory and executive functions, upon entry into the rehabilitation department, after discharge from intensive care. The following tests were administered: Rey Auditory Verbal Learning Test (AVLT) (immediate and delayed recall), Rey-Osterrieth Complex Figure Test (ROCFT) (copy and delayed recall), Stroop Color-Word Test, and Trail Making Test (TMT, A and B).Deficient scores, in beyond 25% of subjects, were found in the copy of the ROCFT (32.1% of subjects), and in the delayed recall of ROCFT (27.2%). Between 10 and 20% of patients presented an abnormal result in delayed recall of AVLT (16.07%), and Stroop Test (time, 15.6%, error, 11.5%). Less than 10% of the sample had abnormal performances on TMT (A, 3.5%, and B, 9.4%), and in AVLT immediate recall (8.9%). Correlations of the performances with age, sex, and education were also found.This paper highlights the high incidence of abnormal cognitive performances in this specific subpopulation of patients with COVID-19 infection. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic shed light on the need for quick diagnosis tools in healthcare, leading to the development of several algorithmic models for disease detection. Though these models are relatively easy to build, their training requires a lot of data, storage, and resources, which may not be available for use by medical institutions or could be beyond the skillset of the people who most need these tools. This paper describes a data analysis and machine learning platform that takes advantage of high-performance computing infrastructure for medical diagnosis support applications. This platform is validated by re-training a previously published deep learning model (COVID-Net) on new data, where it is shown that the performance of the model is improved through large-scale hyperparameter optimisation that uncovered optimal training parameter combinations. The per-class accuracy of the model, especially for COVID-19 and pneumonia, is higher when using the tuned hyperparameters (healthy: 96.5%; pneumonia: 61.5%; COVID-19: 78.9%) as opposed to parameters chosen through traditional methods (healthy: 93.6%; pneumonia: 46.1%; COVID-19: 76.3%). Furthermore, training speed-up analysis shows a major decrease in training time as resources increase, from 207 min using 1 node to 54 min when distributed over 32 nodes, but highlights the presence of a cut-off point where the communication overhead begins to affect performance. The developed platform is intended to provide the medical field with a technical environment for developing novel portable artificial-intelligence-based tools for diagnosis support. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has been a global event affecting all aspects of human life and society, including acoustic aspects. In this Special Issue on COVID-19 and acoustics, we present 48 papers discussing the acoustical impacts of the pandemic and how we deal with it. The papers are divided into seven categories which include: physical masking and speech production, speech perception, noise, the underwater soundscape, the urban soundscape, pathogen transmissibility, and medical diagnosis. [ABSTRACT FROM AUTHOR]

In March 2020, the World Health Organization (WHO) declared COVID-19 a global epidemic, caused by the SARS-CoV-2 virus. Initially, COVID-19 was diagnosed using real-time reverse transcription–polymerase chain reaction (RT-PCR) tests with a turnaround time of 2–3 days. To enhance diagnostic accuracy, medical professionals use medical imaging alongside RT-PCR. A positive result on both RT-PCR and medical imaging confirms a COVID-19 diagnosis. Imaging modalities like chest X-ray (CXR), computed tomography (CT) scans, and ultrasound are widely utilized for rapid and precise COVID-19 diagnoses. However, interpreting COVID-19 from these images is time-consuming and susceptible to human error. Therefore, leveraging artificial intelligence (AI) methods, particularly deep learning (DL) models, can deliver consistent, high-performance results. Unlike conventional machine learning (ML), DL models automate all stages of feature extraction, selection, and classification. This paper presents a comprehensive review of using DL techniques for diagnosing COVID-19 from medical imaging. The introduction provides an overview of diagnosing the coronavirus using medical imaging, highlighting associated challenges. Subsequently, the paper delves into key aspects of Computer-Aided Diagnosis Systems (CADS) based on DL methods for diagnosing COVID-19, covering segmentation, classification, explainable AI (XAI), and predictive research. Additionally, it reviews the rehabilitation systems such as the Internet of Medical Things (IoMT) in the context of COVID-19. In another section, uncertainty quantification (UQ) research is showcased, focusing on DL models for the diagnosis of Covid-19. Crucial challenges and future research directions are outlined in another section. Finally, discussion and conclusion sections are also provided at the end of the paper. [ABSTRACT FROM AUTHOR]

AIMS: This review is focused on the laboratory diagnoses of the coronavirus disease 2019 (COVID-19) by recognizing the antigen of the causative agent SARS-CoV-2 virus. Various antigen tests are available in this moment and these tests are being further developed in order to reach a better diagnostic value. The issue is reviewed in a complex view. METHODS: In this work, a complex survey of the current literature was made. The relevant and recent papers related to antigen tests of COVID-19 are discussed and cited. Basic specifications of the antigen tests and competitive methods were also scrutinized in the current literature. RESULTS: The survey of the current literature (years 2019 - 2021) was made and diagnostic methods like lateral flow tests (lateral flow immunochromatographic assay) and various types of biosensors were specified as tools for COVID-19 diagnosis and their application to be used as a point-of-care test is considered. CONCLUSIONS: Small hand-held assays applicable in the point-of-care conditions for diagnosis of COVID-19 by analysis of SARS-CoV-2 antigen are the means of a growing interest and these means undergo a significant development leading to the improvements of their specifications and applicability to the current praxis. Merit of the assays is discussed in this paper. [ABSTRACT FROM AUTHOR]

Since the first case of COVID‐19 was reported in December 2019, many studies have been carried out on artificial intelligence for the rapid diagnosis of the disease to support health services. Therefore, in this study, we present a powerful approach to detect COVID‐19 and COVID‐19 findings from computed tomography images using pre‐trained models using two different datasets. COVID‐19, influenza A (H1N1) pneumonia, bacterial pneumonia and healthy lung image classes were used in the first dataset. Consolidation, crazy‐paving pattern, ground‐glass opacity, ground‐glass opacity and consolidation, ground‐glass opacity and nodule classes were used in the second dataset. The study consists of four steps. In the first two steps, distinctive features were extracted from the final layers of the pre‐trained ShuffleNet, GoogLeNet and MobileNetV2 models trained with the datasets. In the next steps, the most relevant features were selected from the models using the Sine–Cosine optimization algorithm. Then, the hyperparameters of the Support Vector Machines were optimized with the Bayesian optimization algorithm and used to reclassify the feature subset that achieved the highest accuracy in the third step. The overall accuracy obtained for the first and second datasets is 99.46% and 99.82%, respectively. Finally, the performance of the results visualized with Occlusion Sensitivity Maps was compared with Gradient‐weighted class activation mapping. The approach proposed in this paper outperformed other methods in detecting COVID‐19 from multiclass viral pneumonia. Moreover, detecting the stages of COVID‐19 in the lungs was an innovative and successful approach. [ABSTRACT FROM AUTHOR]

This paper proposes a new deep learning (DL) framework for the analysis of lung diseases, including COVID-19 and pneumonia, from chest CT scans and X-ray (CXR) images. This framework is termed optimized DenseNet201 for lung diseases (LDDNet). The proposed LDDNet was developed using additional layers of 2D global average pooling, dense and dropout layers, and batch normalization to the base DenseNet201 model. There are 1024 Relu-activated dense layers and 256 dense layers using the sigmoid activation method. The hyper-parameters of the model, including the learning rate, batch size, epochs, and dropout rate, were tuned for the model. Next, three datasets of lung diseases were formed from separate open-access sources. One was a CT scan dataset containing 1043 images. Two X-ray datasets comprising images of COVID-19-affected lungs, pneumonia-affected lungs, and healthy lungs exist, with one being an imbalanced dataset with 5935 images and the other being a balanced dataset with 5002 images. The performance of each model was analyzed using the Adam, Nadam, and SGD optimizers. The best results have been obtained for both the CT scan and CXR datasets using the Nadam optimizer. For the CT scan images, LDDNet showed a COVID-19-positive classification accuracy of 99.36%, a 100% precision recall of 98%, and an F1 score of 99%. For the X-ray dataset of 5935 images, LDDNet provides a 99.55% accuracy, 73% recall, 100% precision, and 85% F1 score using the Nadam optimizer in detecting COVID-19-affected patients. For the balanced X-ray dataset, LDDNet provides a 97.07% classification accuracy. For a given set of parameters, the performance results of LDDNet are better than the existing algorithms of ResNet152V2 and XceptionNet. [ABSTRACT FROM AUTHOR]

Since two years ago, the COVID-19 virus has spread strongly in the world and has killed more than 6 million people directly and has affected the lives of more than 500 million people. Early diagnosis of the virus can help to break the chain of transmission and reduce the death rate. In most cases, the virus spreads in the infected person's chest. Therefore, the analysis of a chest CT scan is one of the most efficient methods for diagnosing a patient. Until now, various methods have been presented to diagnose COVID-19 disease in chest CT-scan images. Most recent studies have proposed deep learning-based methods. But handcrafted features provide acceptable results in some studies too. In this paper, an innovative approach is proposed based on the combination of low-level and deep features. First of all, local neighborhood difference patterns are performed to extract handcrafted texture features. Next, deep features are extracted using MobileNetV2. Finally, a two-level decision-making algorithm is performed to improve the detection rate especially when the proposed decisions based on the two different feature set are not the same. The proposed approach is evaluated on a collected dataset of chest CT scan images from June 1, 2021, to December 20, 2021, of 238 cases in two groups of patient and healthy in different COVID-19 variants. The results show that the combination of texture and deep features can provide better performance than using each feature set separately. Results demonstrate that the proposed approach provides higher accuracy in comparison with some state-of-the-art methods in this scope. [ABSTRACT FROM AUTHOR]

Purpose: This study empirically investigates how the COVID-infodemic manifests differently in different languages and in different countries. This paper focuses on the topical and temporal features of misinformation related to COVID-19 in five countries. Design/methodology/approach: COVID-related misinformation was retrieved from 4,487 fact-checked articles. A novel approach to conducting cross-lingual topic extraction was applied. The rectr algorithm, empowered by aligned word-embedding, was utilised. To examine how the COVID-infodemic interplays with the pandemic, a time series analysis was used to construct and compare their temporal development. Findings: The cross-lingual topic model findings reveal the topical characteristics of each country. On an aggregated level, health misinformation represents only a small portion of the COVID-infodemic. The time series results indicate that, for most countries, the infodemic curve fluctuates with the epidemic curve. In this study, this form of infodemic is referred to as "point-source infodemic". The second type of infodemic is continuous infodemic, which is seen in India and the United States (US). In those two countries, the infodemic is predominantly caused by political misinformation; its temporal distribution appears to be largely unrelated to the epidemic development. Originality/value: Despite the growing attention given to misinformation research, existing scholarship is dominated by single-country or mono-lingual research. This study takes a cross-national and cross-lingual comparative approach to investigate the problem of online misinformation. This paper demonstrates how the technological barrier of cross-lingual topic analysis can be overcome with aligned word-embedding algorithms. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/OIR-09-2020-0417 [ABSTRACT FROM AUTHOR]

Background: Coronavirus disease 2019 (COVID-19) has become a pandemic since its first appearance in late 2019. Deaths caused by COVID-19 are still increasing day by day and early diagnosis has become crucial. Since current diagnostic methods have many disadvantages, new investigations are needed to improve the performance of diagnosis.Methods: A novel method is proposed to automatically diagnose COVID-19 by using Electrocardiogram (ECG) data with deep learning for the first time. Moreover, a new and effective method called hexaxial feature mapping is proposed to represent 12-lead ECG to 2D colorful images. Gray-Level Co-Occurrence Matrix (GLCM) method is used to extract features and generate hexaxial mapping images. These generated images are then fed into a new Convolutional Neural Network (CNN) architecture to diagnose COVID-19.Results: Two different classification scenarios are conducted on a publicly available paper-based ECG image dataset to reveal the diagnostic capability and performance of the proposed approach. In the first scenario, ECG data labeled as COVID-19 and No-Findings (normal) are classified to evaluate COVID-19 classification ability. According to results, the proposed approach provides encouraging COVID-19 detection performance with an accuracy of 96.20% and F1-Score of 96.30%. In the second scenario, ECG data labeled as Negative (normal, abnormal, and myocardial infarction) and Positive (COVID-19) are classified to evaluate COVID-19 diagnostic ability. The experimental results demonstrated that the proposed approach provides satisfactory COVID-19 prediction performance with an accuracy of 93.00% and F1-Score of 93.20%. Furthermore, different experimental studies are conducted to evaluate the robustness of the proposed approach.Conclusion: Automatic detection of cardiovascular changes caused by COVID-19 can be possible with a deep learning framework through ECG data. This not only proves the presence of cardiovascular changes caused by COVID-19 but also reveals that ECG can potentially be used in the diagnosis of COVID-19. We believe the proposed study may provide a crucial decision-making system for healthcare professionals.Source Code: All source codes are made publicly available at: https://github.com/mkfzdmr/COVID-19-ECG-Classification. [ABSTRACT FROM AUTHOR]

Coronavirus is an infectious disease induced by extreme acute respiratory syndrome coronavirus 2. Novel coronaviruses can lead to mild to serious symptoms, like tiredness, nausea, fever, dry cough and breathlessness. Coronavirus symptoms are close to influenza, pneumonia and common cold. So Coronavirus can only be confirmed with a diagnostic test. 218 countries and territories worldwide have reported a total of 59.6 million active cases of the COVID-19 and 1.4 million deaths as of November 24, 2020. Rapid, accurate and early medical diagnosis of the disease is vital at this stage. Researchers analyzed the CT and X-ray findings from a large number of patients with coronavirus pneumonia to draw their conclusions. In this paper, we applied Support Vector Machine (SVM) classifier. After that we moved on to deep transfer learning models such as VGG16 and Xception which are implemented using Keras and Tensor flow to detect positive coronavirus patient using X-ray images. VGG16 and Xception show better performances as compared to SVM. In our work, Xception gained an accuracy of 97.46% with 98% f-score. [ABSTRACT FROM AUTHOR]

The COVID-19 pandemic has opened numerous challenges for scientists to use massive data to develop an automatic diagnostic tool for COVID-19. Since the outbreak in January 2020, COVID-19 has caused a substantial destructive impact on society and human life. Numerous studies have been conducted in search of a suitable solution to test COVID-19. Artificial intelligence (AI) based research is not behind in this race, and many AI-based models have been proposed. This paper proposes a lightweight convolutional neural network (CNN) model to classify COVID and Non_COVID patients by analyzing the hidden features in the X-Ray images. The model has been evaluated with different standard metrics to prove the reliability of the model. The model obtained 98.78%, 93.22%, and 92.7% accuracy in the training, validation, and testing phases. In addition, the model achieved 0.964 scores in the Area Under Curve (AUC) metric. We compared the model with four state-of-art pre-trained models (VGG16, InceptionV3, DenseNet121, and EfficientNetB6). The evaluation results demonstrate that the proposed CNN model is a candidate for an automatic diagnostic tool for the classification of COVID-19 patients using chest X-ray images. This research proposes a technique to classify COVID-19 patients and does not claim any medical diagnosis accuracy. [ABSTRACT FROM AUTHOR]

Recently, the whole world was hit by COVID‐19 pandemic that led to health emergency everywhere. During the peak of the early waves of the pandemic, medical and healthcare departments were overwhelmed by the number of COVID‐19 cases that exceeds their capacity. Therefore, new rules and techniques are urgently required to help in receiving, filtering and diagnosing patients. One of the decisive steps in the fight against COVID‐19 is the ability to detect patients early enough and selectively put them under special care. Symptoms of this disease can be observed in chest X‐rays. However, it is sometimes difficult and tricky to differentiate "only" pneumonia patients from COVID‐19 patients. Machine‐learning can be very helpful in carrying out this task. In this paper, we tackle the problem of COVID‐19 diagnostics following a data‐centric approach. For this purpose, we construct a diversified dataset of chest X‐ray images from publicly available datasets and by applying data augmentation techniques. Then, we employ a transfer learning approach based on a pre‐trained convolutional neural network (DenseNet‐169) to detect COVID‐19 in chest X‐ray images. In addition to that, we employ Gradient‐weighted Class Activation Mapping (GradCAM) to provide visual inspection and explanation of the predictions made by our deep learning model. The results were evaluated against various metrics such as sensitivity, specificity, Positive Predictive Value (PPV), Negative Predictive Value (NPV) and the confusion matrix. The resulting models has achieved an average detection accuracy close to 98.82%. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

A comprehensive medical image-based diagnosis is usually performed across various image modalities before passing a final decision; hence, designing a deep learning model that can use any medical image modality to diagnose a particular disease is of great interest. The available methods are multi-staged, with many computational bottlenecks in between. This paper presents an improved end-to-end method of multimodal image classification using deep learning models. We present top research methods developed over the years to improve models trained from scratch and transfer learning approaches. We show that when fully trained, a model can first implicitly discriminate the imaging modality and then diagnose the relevant disease. Our developed models were applied to COVID-19 classification from chest X-ray, CT scan, and lung ultrasound image modalities. The model that achieved the highest accuracy correctly maps all input images to their respective modality, then classifies the disease achieving overall 91.07% accuracy. [ABSTRACT FROM AUTHOR]

The coronavirus disease (COVID-19) is an infectious disease caused by the SARS-CoV-2 virus. COVID-19 is found to be the most infectious disease in last few decades. This disease has infected millions of people worldwide. The inadequate availability and the limited sensitivity of the testing kits have motivated the clinicians and the scientist to use Computer Tomography (CT) scans to screen COVID-19. Recent advances in technology and the availability of deep learning approaches have proved to be very promising in detecting COVID-19 with increased accuracy. However, deep learning approaches require a huge labeled training dataset, and the current availability of benchmark COVID-19 data is still small. For the limited training data scenario, the CNN usually overfits after several iterations. Hence, in this work, we have investigated different pre-trained network architectures with transfer learning for COVID-19 detection that can work even on a small medical imaging dataset. Various variants of the pre-trained ResNet model, namely ResNet18, ResNet50, and ResNet101, are investigated in the current paper for the detection of COVID-19. The experimental results reveal that transfer learned ResNet50 model outperformed other models by achieving a recall of 98.80% and an F1-score of 98.41%. To further improvise the results, the activations from different layers of best performing model are also explored for the detection using the support vector machine, logistic regression and K-nearest neighbor classifiers. Moreover, a classifier fusion strategy is also proposed that fuses the predictions from the different classifiers via majority voting. Experimental results reveal that via using learned image features and classification fusion strategy, the recall, and F1-score have improvised to 99.20% and 99.40%. [ABSTRACT FROM AUTHOR]

Laboratory medicine plays a fundamental role in the detection, diagnosis and management of COVID-19 infection. Recent observations of the morphology of cells circulating in blood found the presence of particular reactive lymphocytes (COVID-19 RL) in some of the infected patients and demonstrated that it was an indicator of a better prognosis of the disease. Visual morphological analysis is time consuming, requires smear review by expert clinical pathologists, and is prone to subjectivity. This paper presents a convolutional neural network system designed for automatic recognition of COVID-19 RL. It is based on the Xception71 structure and is trained using images of blood cells from real infected patients. An experimental study is carried out with a group of 92 individuals. The input for the system is a set of images selected by the clinical pathologist from the blood smear of a patient. The output is the prediction whether the patient belongs to the group associated with better prognosis of the disease. A threshold is obtained for the classification system to predict that the smear belongs to this group. With this threshold, the experimental test shows excellent performance metrics: 98.3% sensitivity and precision, 97.1% specificity, and 97.8% accuracy. The system does not require costly calculations and can potentially be integrated into clinical practice to assist clinical pathologists in a more objective smear review for early prognosis. [ABSTRACT FROM AUTHOR]

The outbreak of coronavirus disease (COVID-19) has been a nightmare to citizens, hospitals, healthcare practitioners, and the economy in 2020. The overwhelming number of confirmed cases and suspected cases put forward an unprecedented challenge to the hospital’s capacity of management and medical resource distribution. To reduce the possibility of cross-infection and attend a patient according to his severity level, expertly diagnosis and sophisticated medical examinations are often required but hard to fulfil during a pandemic. To facilitate the assessment of a patient’s severity, this paper proposes a multi-modality feature learning and fusion model for end-to-end covid patient severity prediction using the blood test supported electronic medical record (EMR) and chest computerized tomography (CT) scan images. To evaluate a patient’s severity by the co-occurrence of salient clinical features, the High-order Factorization Network (HoFN) is proposed to learn the impact of a set of clinical features without tedious feature engineering. On the other hand, an attention-based deep convolutional neural network (CNN) using pre-trained parameters are used to process the lung CT images. Finally, to achieve cohesion of cross-modality representation, we design a loss function to shift deep features of both-modality into the same feature space which improves the model’s performance and robustness when one modality is absent. Experimental results demonstrate that the proposed multi-modality feature learning and fusion model achieves high performance in an authentic scenario. [ABSTRACT FROM AUTHOR]

Due to false negative results of the real-time Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR) test, the complemental practices such as computed tomography (CT) and X-ray in combination with RT-PCR are discussed to achieve a more accurate diagnosis of COVID-19 in clinical practice. Since radiology includes visual understanding as well as decision making under limited conditions such as uncertainty, urgency, patient burden, and hospital facilities, mistakes are inevitable. Therefore, there is an immediate requirement to carry out further investigation and develop new accurate detection and identification methods to provide automatically quantitative evaluation of COVID-19. In this paper, we propose a new computer-aided diagnosis application for COVID-19 detection using deep learning techniques. A new technique, which receives symmetric X-ray data as the input, is presented in this study by combining Convolutional Neural Networks (CNN) with Ant Lion Optimization Algorithm (ALO) and Multiclass Naïve Bayes Classifier (NB). Moreover, several other classifiers such as Softmax, Support Vector Machines (SVM), K-Nearest Neighbors (KNN) and Decision Tree (DT) are combined with CNN. The promising results of these classifiers are evaluated and presented for accuracy, precision, and F1-score metrics. NB classifier with Ant Lion Optimization Algorithm and CNN produced the best results with 98.31% accuracy, 100% precision and 98.25% F1-score and with the lowest execution time. [ABSTRACT FROM AUTHOR]

Purpose: Abdominal thromboses are a poorly characterized thrombotic complication of COVID-19. The aim of this paper is to report multimodality ultrasound imaging findings of the abdomen in evaluation of thrombotic lesions in hospitalized patients with COVID-19. Patients & Methods: In this retrospective observational study, patients admitted to a single University Hospital from April 1, 2020 to April 30, 2022, who tested positive for COVID-19 and developed acute abdominal pain over the course of hospitalization were included. Abdominal ultrasound imaging studies performed in these patients were reviewed, including B mode ultrasound (BMUS), color-coded Doppler ultrasound (CCDS) and contrast enhanced ultrasound (CEUS). Thromboembolic findings on contrast enhanced computed tomography (CTA) were also recorded. Results: Finally, 13 cases of abdominal thrombosis in 226 with COVID 19 infections were included (mean age, 56.69±8.97 years; 10 men, 3 women). Thromboembolic events included: iliac thrombosis (n = 4), portal venous (PV) thrombosis (n = 3), superior mesenteric vein (VMS) thrombosis (n = 2), inferior vena cava (IVC) thrombosis (n = 5) and inferior mesenteric vein (VMI) thrombosis (n = 1). In all cases of abdominal thrombosis, during high resolution BMUS scan, intra-luminary hypoechogenic appositional thrombi could be detected. Meanwhile blood flow with reduced speed less than 20 cm/s could be observed by CCDS. High arterial flow speed was a sign of collateral flow changes with diffuse venous dilatation. On CEUS, changes of the microcirculation of the liver, spleen, kidneys or small bowel by infarctions or micro-emboli could be detected. In 3 cases of PV thrombosis and in 2 cases of IVC thrombosis, catheter interventions were successful performed for recanalization without relevant lumen reduction afterwards. In other cases, without interventional procedure, partial recanalization happened with venous flow speed over 15 cm/s and lumen reduction more than 50%. Conclusions: Our study highlights those thromboembolic complications can be seen in hospitalized patients with COVID-19. Multimodality ultrasound examinations is helpful for early and accurate diagnosis of these complications. [ABSTRACT FROM AUTHOR]

A new epidemic of acute respiratory viral pneumonia was discovered in central China at the end of 2019. The disease was given the name coronavirus disease 2019 (COVID-19), and the virus that caused this disease was known as severe acute respiratory syndrome coronavirus (SARS-CoV-2). So far, diagnostic methods have been focused on (a) human antibody detection, (b) viral antigen detection and (c) viral gene detection, the latter using RT-PCR being the most accurate approach. In this paper, we present a summary of the COVID-19 pandemic, clinical features and epidemiology and pathogenesis. Also, we focus on the recent advances in bioanalytical diagnostic methods based on various techniques for SARS-CoV-2 sensing that have recently been published (2020–2021). Furthermore, we present the mechanisms, advantages and disadvantages of the most common biosensors for COVID-19 detection, which include optical, electrochemical and piezoelectric biosensors as well as wearable and smart nanobiosensors, immunosensors, aptasensors and genosensors. [ABSTRACT FROM AUTHOR]

COVID-19 cases are still rising globally in the middle of the tuberculosis epidemic. Several countries have reported TB-COVID-19 coinfection that could pose a double burden in the health care facilities in developing countries. We reported two pulmonary tuberculosis patients coinfected with COVID-19 with an overlapping clinical manifestation of tuberculosis and COVID-19 with a good prognosis at the end of COVID-19 treatment. This paper aims to discuss TB patients' susceptibility against SARS-COV-2 infection, the clinical profile of TB-COVID-19 coinfection, and the disease's prognosis. The clinician should be aware of both common disease symptoms that appear in a patient and should be confirmed and treat promptly. [ABSTRACT FROM AUTHOR]

A 60-year-old man presented with dyspnea four days after the second dose of the coronavirus disease (COVID-19) vaccine. Imaging revealed extensive ground-glass opacification. Blood tests were notable for elevated KL-6 levels. Bronchoalveolar lavage fluid analysis showed increased lymphocyte-dominant inflammatory cells and decreased CD4/CD8 ratio. These findings were consistent with the diagnosis of drug-induced interstitial lung disease (DIILD). To the best of our knowledge, this has never been reported in previous literature. Treatment with glucocorticoids relieved his symptoms. This paper highlights that although extremely rare, COVID-19 vaccine could cause DIILD, and early diagnosis and treatment are crucial to improve patient outcomes. [ABSTRACT FROM AUTHOR]

Diagnosis and treatment of digestive lesions remain the hold the limelight of both practitioners and scientists. Their combination worsens the prognosis in patients with chronic kidney disease in chronic glomerulonephritis, there is an imbalance of trace elements, which negatively affects the course of the disease and increases the risk of such complications. The paper aims to study the effect of Minerol on the clinical manifestations of the disease in patients with combined damage to the gastroenterological zone (chronic gastroduodenitis, peptic ulcer disease) and kidneys (chronic glomerulonephritis and pyelonephritis) according to clinical, laboratory and instrumental research methods. The diagnosis was verified by esophagogastroduodenoscopy with targeted biopsy, Xray method, ph-metry, ultrasound; association with Helicobacter pylori - according to biopsy urease and respiratory tests, the presence of urinary syndrome - generally accepted laboratory methods, and radionuclide methods, if necessary. Patients were divided into two groups aged 18-60 years. When included in the complex treatment of gastroduodenal zone and kidney lesions, the biologically active drug Minerol contributes to a faster recovery of patients and plays an indispensable role in the prevention of complications such as uremic anaemia, cardiomyopathy, etc., providing anti-inflammatory and sanogenetic effects, can be useful in the treatment of post COVID syndrome. [ABSTRACT FROM AUTHOR]

Since the outbreak of COVID-19 in 2019, the rapid spread of the epidemic has brought huge challenges to medical institutions. If the pathological region in the COVID-19 CT image can be automatically segmented, it will help doctors quickly determine the patient's infection, thereby speeding up the diagnosis process. To be able to automatically segment the infected area, we proposed a new network structure and named QC-HC U-Net. First, we combine residual connection and dense connection to form a new connection method and apply it to the encoder and the decoder. Second, we choose to add Hypercolumns in the decoder section. Compared with the benchmark 3D U-Net, the improved network can effectively avoid vanishing gradient while extracting more features. To improve the situation of insufficient data, resampling and data enhancement methods are selected in this paper to expand the datasets. We used 63 cases of MSD lung tumor data for training and testing, continuously verified to ensure the training effect of this model, and then selected 20 cases of public COVID-19 data for training and testing. Experimental results showed that in the segmentation of COVID-19, the specificity and sensitivity were 85.3% and 83.6%, respectively, and in the segmentation of MSD lung tumors, the specificity and sensitivity were 81.45% and 80.93%, respectively, without any fitting. [ABSTRACT FROM AUTHOR]

COVID‐19‐associated cutaneous manifestations are one of the most important and relatively common extra‐respiratory presentations of SARS‐COV‐2 infection. The exact identification and classification of these lesions can facilitate the accurate diagnosis and treatment. There are several case reports and small case series which describe cutaneous lesions in hands and feet. Currently, there is no scoping review about acral skin manifestations associated with COVID‐19. This paper covers the COVID‐related acral skin manifestations in 10 entities including acral papulo‐vesicular eruption, acral urticarial lesion, acral non‐inflammatory purpura and necrosis, acro‐ischemia associated COVID‐19, acral vasculitis, chilblain‐like lesion (COVID Toe), acral erythema multiform (EM) like lesion, hand and foot skin lesions associated with multisystem inflammatory syndrome in children (MISC), acral peeling conditions and red half‐moon nail sign. Future studies should focus on exact investigation of etiologies of these lesions including role of immune senescence, environment, gender, immunogenetics and relation of these lesion with major organ involvements. [ABSTRACT FROM AUTHOR]

In order to understand how these studies are evolving to respond to COVID-19 and to facilitate the containment of COVID-19, this paper accurately extracted the spatial and topic information from the metadata of papers related to COVID-19 using text mining techniques, and with the extracted information, the research evolution was analyzed from the temporal, spatial, and topic perspectives. From a temporal view, in the three months after the emergence of COVID-19, the number of published papers showed an obvious growth trend, and it showed a relatively stable cyclical trend in the later period, which is basically consistent with the development of COVID-19. Spatially, most of the authors who participated in related research are concentrated in the United States, China, Italy, the United Kingdom, Spain, India, and France. At the same time, with the continuous spread of COVID-19 in the world, the distribution of the number of authors has gradually expanded, showing to be correlated with the severity of COVID-19 at a spatial scale. From the perspective of topic, the early stage of COVID-19 emergence, the related research mainly focused on the origin and gene identification of the virus. After the emergence of the pandemic, studies related to the diagnosis and analysis of psychological health, personal security, and violent conflict are added. Meanwhile, some categories are most closely related to the control and prevention of the epidemic, such as pathology analysis, diagnosis, and treatment; epidemic situation and coping strategies; and prediction and assessment of epidemic situation. In most time periods, the majority of studies focused on these three categories. [ABSTRACT FROM AUTHOR]

This paper focuses on the application of deep learning (DL) in the diagnosis of coronavirus disease (COVID-19). The novelty of this work is in the introduction of optimized InceptionResNetV2 for COVID-19 (CO-IRv2) method. A part of the CO-IRv2 scheme is derived from the concepts of InceptionNet and ResNet with hyperparameter tuning, while the remaining part is a new architecture consisting of a global average pooling layer, batch normalization, dense layers, and dropout layers. The proposed CO-IRv2 is applied to a new dataset of 2481 computed tomography (CT) images formed by collecting two independent datasets. Data resizing and normalization are performed, and the evaluation is run up to 25 epochs. Various performance metrics, including precision, recall, accuracy, F1-score, area under the receiver operating characteristics (AUC) curve are used as performance metrics. The effectiveness of three optimizers known as Adam, Nadam and RMSProp are evaluated in classifying suspected COVID-19 patients and normal people. Results show that for CO-IRv2 and for CT images, the obtained accuracies of Adam, Nadam and RMSProp optimizers are 94.97%, 96.18% and 96.18%, respectively. Furthermore, it is shown here that for the case of CT images, CO-IRv2 with Nadam optimizer has better performance than existing DL algorithms in the diagnosis of COVID-19 patients. Finally, CO-IRv2 is applied to an X-ray dataset of 1662 images resulting in a classification accuracy of 99.40%. [ABSTRACT FROM AUTHOR]

This paper analyses COVID-19 patients' dynamics during the first wave in the region of Castilla y León (Spain) with around 2.4 million inhabitants using multi-state competing risk survival models. From the date registered as the start of the clinical process, it is assumed that a patient can progress through three intermediate states until reaching an absorbing state of recovery or death. Demographic characteristics, epidemiological factors such as the time of infection and previous vaccinations, clinical history, complications during the course of the disease and drug therapy for hospitalised patients are considered as candidate predictors. Regarding risk factors associated with mortality and severity, consistent results with many other studies have been found, such as older age, being male, and chronic diseases. Specifically, the hospitalisation (death) rate for those over 69 is 27.2% (19.8%) versus 5.3% (0.7%) for those under 70, and for males is 14.5%(7%) versus 8.3%(4.6%)for females. Among patients with chronic diseases the highest rates of hospitalisation are 26.1% for diabetes and 26.3% for kidney disease, while the highest death rate is 21.9% for cerebrovascular disease. Moreover, specific predictors for different transitions are given, and estimates of the probability of recovery and death for each patient are provided by the model. Some interesting results obtained are that for patients infected at the end of the period the hazard of transition from hospitalisation to ICU is significatively lower (p < 0.001) and the hazard of transition from hospitalisation to recovery is higher (p < 0.001). For patients previously vaccinated against pneumococcus the hazard of transition to recovery is higher (p < 0.001). Finally, internal validation and calibration of the model are also performed. [ABSTRACT FROM AUTHOR]

Invasive pulmonary aspergillosis (IPA) has always been a challenging diagnosis and risk factors an important guide to investigate specific population, especially in Intensive Care Unit. Traditionally recognized risk factors for IPA have been haematological diseases or condition associated with severe immunosuppression, lately completed by chronic conditions (such as obstructive pulmonary disease, liver cirrhosis, chronic kidney disease and diabetes), influenza infection and Intensive Care Unit (ICU) admission. Recently, a new association with SARS-CoV2 infection, named COVID-19-associated pulmonary aspergillosis (CAPA), has been reported worldwide, even if its basic epidemiological characteristics have not been completely established yet. In this narrative review, we aimed to explore the potential risk factors for the development of CAPA and to evaluate whether previous host factors or therapeutic approaches used in the treatment of COVID-19 critically ill patients (such as mechanical ventilation, intensive care management, corticosteroids, broad-spectrum antibiotics, immunomodulatory agents) may impact this new diagnostic category. Reviewing all English-language articles published from December 2019 to December 2020, we identified 21 papers describing risk factors, concerning host comorbidities, ICU management, and COVID-19 therapies. Although limited by the quality of the available literature, data seem to confirm the role of previous host risk factors, especially respiratory diseases. However, the attention is shifting from patients' related risk factors to factors characterizing the hospital and intensive care course, deeply influenced by specific features of COVID treatment itself. Prolonged invasive or non-invasive respiratory support, as well as the impact of corticosteroids and/or immunobiological therapies seem to play a pivotal role. ICU setting related factors, such as environmental factors, isolation conditions, ventilation systems, building renovation works, and temporal spread with respect to pandemic waves, need to be considered. Large, prospective studies based on new risk factors specific for CAPA are warranted to guide surveillance and decision of when and how to treat this particular population. [ABSTRACT FROM AUTHOR]

During last two decades, the biggest global epidemic had been associated with middle east respiratory syndrome, severe acute respiratory syndrome, and novel coronavirus-19 (COVID-19) with clinical symptoms of bronchitis, pneumonia, and fetal respiratory illness. Infection caused by COVID-19 initially assumed to be milder in nature but consequently spreading across the globe and devastating mortality rate rapidly made it a pandemic. Having enormous challenges, many significant issues are yet to be addressed. Scientific community is engaged in designing and developing effective nano-biosensors for the quick detection of COVID-19, easy diagnosis as well as absolute tracking of infected population in order to prevent pandemic outbreak further. In this paper, key stages like suppressing the immune response of COVID-19 patients, diagnosis of COVID-19, and prevention of COVID-19 using nanomaterials have been discussed. Further, the unresolved challenges and drawbacks toward treatments and vaccine development at the earliest to win over this war have also been critically discussed. [ABSTRACT FROM AUTHOR]

The coronaviruses are a deadly family of epidemic viruses that can spread from one individual to another very quickly, infecting masses. The literature on epidemics indicates that the early diagnosis of a coronavirus infection can lead to a reduction in mortality rates. To prevent coronavirus disease 2019 (COVID-19) from spreading, the regular identification and monitoring of infected patients are needed. In this regard, wireless body area networks (WBANs) can be used in conjunction with machine learning and the Internet of Things (IoT) to identify and monitor the human body for health-related information, which in turn can aid in the early diagnosis of diseases. This paper proposes a novel coronavirus-body area network (CoV-BAN) model based on IoT technology as a real-time health monitoring system for the detection of the early stages of coronavirus infection using a number of wearable biosensors to examine the health status of the patient. The proposed CoV-BAN model is tested with five machine learning-based classification methods, including random forest, logistic regression, Naive Bayes, support vector machine and multi-layer perceptron classifiers, to optimize the accuracy of the diagnosis of COVID-19. For the long-term sustainability of the sensor devices, the development of energy-efficient WBAN is critical. To address this issue, a long-range (LoRa)-based IoT program is used to receive biosensor signals from the patient and transmit them to the cloud directly for monitoring. The experimental results indicate that the proposed model using the random forest classifier outperforms models using the other classifiers, with an average accuracy of 88.6%. In addition, power consumption is reduced when LoRa technology is used as a relay node. [ABSTRACT FROM AUTHOR]

Introduction. Severe acute respiratory syndrome coronavirus 2 infection-induced coagulopathy may cause various thrombotic complications, such as cerebral venous sinus thrombosis, a less common type of stroke with a variable clinical presentation and high mortality rate. The objective of this paper was to identify clinical, laboratory and radiological characteristics, risk factors, therapeutic modalities, and outcome of a young patient with cerebral venous sinus thrombosis associated with oligosymptomatic coronavirus disease 2019 infection. Case Report. We present a case of a 32-year-old woman suffering from a stroke due to cerebral venous sinus thrombosis associated with a mild form of coronavirus disease 2019 infection. The patient was without a history of previous diseases and risk factors for cerebral venous sinus thrombosis. Two weeks before the cerebrovascular incident, the patient presented with oligosymptomatic coronavirus disease 2019 infection associated with headache. Laboratory findings were characterized by two conditions: hypercoagulability and systemic inflammation. Bilateral thalamic and right frontal hemorrhagic venous infarctions with superior sagittal and straight sinus thrombosis and thrombosis of the vein of Galen were established by magnetic resonance imaging of the head. The main therapeutic approaches included anticoagulant therapy, therapeutic protocol for coronavirus disease 2019 infection, seizure control therapy and intracranial hypertension management. The treatment outcome was good, with minimal residual symptoms. Conclusion. Physicians should always consider the high risk of cerebral venous sinus thrombosis with nonspecific neurological symptoms in patients with mild coronavirus disease 2019 infection in order to provide early diagnosis, the most effective individually tailored treatment, and to prevent complications. [ABSTRACT FROM AUTHOR]

COVID-19 has been considered as a global pandemic. Recently, researchers are using deep learning networks for medical diseases' diagnosis. Some of these researches focuses on optimizing deep learning neural networks for enhancing the network accuracy. Optimizing the Convolutional Neural Network includes testing various networks which are obtained through manually configuring their hyperparameters, then the configuration with the highest accuracy is implemented. Each time a different database is used, a different combination of the hyperparameters is required. This paper introduces two COVID-19 diagnosing systems using both Residual Network and Xception Network optimized by random search in the purpose of finding optimal models that give better diagnosis rates for COVID-19. The proposed systems showed that hyperparameters tuning for the ResNet and the Xception Net using random search optimization give more accurate results than other techniques with accuracies 99.27536% and 100 % respectively. We can conclude that hyperparameters tuning using random search optimization for either the tuned Residual Network or the tuned Xception Network gives better accuracies than other techniques diagnosing COVID-19. [ABSTRACT FROM AUTHOR]