Search

Cross-laminated timber (CLT) is a mass timber product that has recently garnered considerable attention for lateral-force resisting system (LFRS) applications. The main objectives of this study were to investigate the rocking behavior of a high-aspect-ratio (height/width) CLT shear wall without post-tensioning, and to validate a finite-element (FE) model based on the cyclic and dynamic response of the wall. To this point, high-aspect-ratio walls in the literature have primarily been post-tensioned. The testing component of this study included connector tests, quasistatic cyclic shear wall tests, and shake-table tests under four different ground motions scaled to design earthquake (DE)- and maximum considered earthquake (MCE)-level intensities. A generic shear connector was used for this study to allow for proprietary and other systems to demonstrate equivalence. The connectors were tested under shear and uplift, and shear-wall tests were performed using the Consortium of Universities for Research in Earthquake Engineering (CUREE) displacement protocol, which has been widely used for light-frame wood structures. Interstory drift (ISD) ratios in the shake-table tests ranged from 0.97% to 2.02%, and the tests demonstrated the system's ability to resist seismic loading. An FE model of the CLT wall was developed that showed good agreement with the cyclic and shake-table tests. The difference between the ISD ratios in the numerical model and the shake-table tests ranged from 5.4% to 31.3%, with an average of 17.9%, which was in good accordance with the accuracy of the existing CLT models. This system can be utilized as a retrofit option, in conjunction with light-frame wood shear walls, where lack of space may be a challenge. [ABSTRACT FROM AUTHOR]

A cross-laminated timber (CLT) panel is a heavy timber structural component fabricated by laminating layers of timber boards in an orthogonal pattern. This paper presents a study of the lateral-load response of self-centering (SC) posttensioned CLT structural walls (i.e., SC-CLT walls), which are constructed by posttensioning CLT wall panels to the foundation with vertical posttensioning steel bars. The bars pass through the CLT panels and are anchored to the CLT panels at the top of the wall and to the foundation at the bottom of the wall. Cyclic loading tests were conducted on a series of SC-CLT wall specimens with different configurations. Structural limit states of SC-CLT walls under lateral load are identified. Two types of analytical models are proposed to predict SC-CLT wall response, namely, a design-oriented analytical model based on simple mathematical expressions, and a fiber-element-based numerical model. Comparisons between the analytical and experimental results are made, which indicate that the simple mathematical expressions and the fiber-elementbased numerical model provide accurate estimates of the lateral-load response of SC-CLT walls under cyclic loading. [ABSTRACT FROM AUTHOR]

Cross-laminated timber (CLT) is a wood construction technology that has been utilized in Europe for several decades and has become even more popular recently. Although the technology has been in existence for approximately 20 years, its seismic performance has been explored only recently by a handful of researchers. Interest in bringing CLT to the North American construction market necessitates a full understanding of the seismic behavior of CLT systems and the development of a response-modification factor, known as the R-factor, for use in force-based seismic design codes. In this paper, a nonlinear, load-resistance model for CLT shear walls is developed based on reversed-cyclic test data and explained. An estimation of a possible R-factor is obtained by developing a design for a 6-story CLT apartment building, based on computed peak interstory drifts, to achieve good performance in a high seismic region of the United States. It is concluded that using the equivalent lateral force procedure with an R-factor close to 4.5 likely will provide an 80% probability of not exceeding 4% peak interstory drift during a maximum credible earthquake (MCE) near Los Angeles, CA (i.e., an earthquake with a return period of 2,500 years). [ABSTRACT FROM AUTHOR]

With two producers in operation and over 20 buildings already constructed or in planning process, use of cross-laminated timber (CLT) is gaining popularity in Canada. Since CLT as a structural system is currently not included in the National Building Code of Canada (NBCC), one of the most important issues are the values for the force modification factors for seismic design of CLT structures when NBCC equivalent static force procedure is used. In this study, a test-calibrated numerical model for CLT shear walls was applied to develop the design resistances for typical CLT wall configurations. An estimation of a possible range of Rd-factors was obtained by developing design variations for three multi-storey CLT apartment buildings. By specifying the desired seismic performance in terms of inter-storey drift, it is concluded that an Rd-factor of 2.0 will likely provide desirable building performance during the design earthquake level event in Vancouver, B.C. [ABSTRACT FROM AUTHOR]

Cross-laminated timber (CLT) is a type of mass timber panel used in floor, wall, and roof assemblies. An important consideration in design and construction of timber buildings is moisture durability. This study characterized the hygrothermal performance of CLT panels with laboratory measurements at multiple scales, field measurements, and modeling. The CLT panels consisted of five layers, four with spruce-pine-fir lumber and one with Douglas-fir lumber. Laboratory characterization involved measurements on small specimens that included material from only one or two layers and large specimens that included all five layers of the CLT panel. Water absorption was measured with panel specimens partially immersed in water, and a new method was developed where panels were exposed to ponded water on the top surface. This configuration gave a higher rate of water uptake than the partial immersion test. The rate of drying was much slower when the wetted surface was covered with an impermeable membrane. Measured hygrothermal properties were implemented in a one-dimensional transient hygrothermal model. Simulation of water uptake indicated that vapor diffusion had a significant contribution in parallel with liquid transport. A simple approximation for liquid transport coefficients, with identical coefficients for suction and redistribution, was adequate for simulating panel-scale wetting and drying. Finally, hygrothermal simulation of a CLT roof assembly that had been monitored in a companion field study showed agreement in most cases within the sensor uncertainty. Although the hygrothermal properties are particular to the wood species and CLT panels investigated here, the modeling approach is broadly applicable. • Moisture and thermal properties of cross-laminated timber (CLT) were measured. • New method was developed for measuring water absorption on top of CLT panel. • Vapor diffusion contributed to water uptake in parallel with liquid transport. • 1-D transient hygrothermal model was validated with laboratory experiments. • Simulation of a CLT roof assembly compared well with field measurements. [ABSTRACT FROM AUTHOR]