Search

Glycoside hydrolase family 7 (GH7) cellulases are key enzymes responsible for carbon cycling on earth through their role in cellulose degradation and constitute highly important industrial enzymes as well. Although these enzymes are found in a wide variety of evolutionarily distant organisms across eukaryotes, they exhibit remarkably conserved features within two groups: exo‐acting cellobiohydrolases and endoglucanases. However, recently reports have emerged of a separate clade of GH7 endoglucanases from protist symbionts of termites that are 60–80 amino acids shorter. In this work, we describe the first crystal structure of a short GH7 endoglucanase, RsSymEG1, from a symbiont of the lower termite Reticulitermes speratus. A more open flat surface and shorter loops around the non‐reducing end of the cellulose‐binding cleft indicate enhanced access to cellulose chains on the surface of cellulose microfibrils. Additionally, when comparing activities on polysaccharides to a typical fungal GH7 endoglucanase (Trichoderma longibrachiatum Cel7B), RsSymEG1 showed significantly faster initial hydrolytic activity. We also examine the prevalence and diversity of GH7 enzymes that the symbionts provide to the termite host, compare overall structures and substrate binding between cellobiohydrolase and long and short endoglucanase, and highlight the presence of similar short GH7s in other organisms. [ABSTRACT FROM AUTHOR]

The glycoside hydrolase family 3 (GH3) β‐glucosidases are a structurally diverse family of enzymes. Cel3A from Neurospora crassa (NcCel3A) belongs to a subfamily of key enzymes that are crucial for industrial biomass degradation. β‐Glucosidases hydrolyse the β‐1,4 bond at the nonreducing end of cellodextrins. The hydrolysis of cellobiose is of special importance as its accumulation inhibits other cellulases acting on crystalline cellulose. Here, the crystal structure of the biologically relevant dimeric form of NcCel3A is reported. The structure has been refined to 2.25 Å resolution, with an Rcryst and Rfree of 0.18 and 0.22, respectively. NcCel3A is an extensively N‐glycosylated glycoprotein that shares 46% sequence identity with Hypocrea jecorina Cel3A, the structure of which has recently been published, and 61% sequence identity with the thermophilic β‐glucosidase from Rasamsonia emersonii. NcCel3A is a three‐domain protein with a number of extended loops that deepen the active‐site cleft of the enzyme. These structures characterize this subfamily of GH3 β‐glucosidases and account for the high cellobiose specificity of this subfamily. The glycoside hydrolase family 3 β‐glucosidase Cel3A from Neurospora crassa (NcCel3A) is highly specific for cellobiose. The crystal structure of NcCel3A has been solved to 2.25 Å resolution. The structure is a dimer and exhibits a high degree of N‐glycosylation. [ABSTRACT FROM AUTHOR]

The filamentous fungus Hypocrea jecorina produces a number of cellulases and hemicellulases that act in a concerted fashion on biomass and degrade it into monomeric or oligomeric sugars. β-Glucosidases are involved in the last step of the degradation of cellulosic biomass and hydrolyse the β-glycosidic linkage between two adjacent molecules in dimers and oligomers of glucose. In this study, it is shown that substituting the β-glucosidase from H. jecorina (HjCel3A) with the β-glucosidase Cel3A from the thermophilic fungus Rasamsonia emersonii (ReCel3A) in enzyme mixtures results in increased efficiency in the saccharification of lignocellulosic materials. Biochemical characterization of ReCel3A, heterologously produced in H. jecorina, reveals a preference for disaccharide substrates over longer gluco-oligosaccharides. Crystallographic studies of ReCel3A revealed a highly N-glycosylated three-domain dimeric protein, as has been observed previously for glycoside hydrolase family 3 β-glucosidases. The increased thermal stability and saccharification yield and the superior biochemical characteristics of ReCel3A compared with HjCel3A and mixtures containing HjCel3A make ReCel3A an excellent candidate for addition to enzyme mixtures designed to operate at higher temperatures. [ABSTRACT FROM AUTHOR]

Glycoside hydrolase family 7 (GH7) cellobiohydrolases (CBHs) play a key role in biomass recycling in nature. They are typically the most abundant enzymes expressed by potent cellulolytic fungi, and are also responsible for the majority of hydrolytic potential in enzyme cocktails for industrial processing of plant biomass. The thermostability of the enzyme is an important parameter for industrial utilization. In this study, Cel7 enzymes from different fungi were expressed in a fungal host and assayed for thermostability, including Hypocrea jecorina Cel7A as a reference. The most stable of the homologues, Humicola grisea var. thermoidea Cel7A, exhibits a 10°C higher melting temperature ( Tm of 72.5°C) and showed a 4-5 times higher initial hydrolysis rate than H. jecorina Cel7A on phosphoric acid-swollen cellulose and showed the best performance of the tested enzymes on pretreated corn stover at elevated temperature (65°C, 24 h). The enzyme shares 57% sequence identity with H. jecorina Cel7A and consists of a GH7 catalytic module connected by a linker to a C-terminal CBM1 carbohydrate-binding module. The crystal structure of the H. grisea var. thermoidea Cel7A catalytic module (1.8 Å resolution; Rwork and Rfree of 0.16 and 0.21, respectively) is similar to those of other GH7 CBHs. The deviations of several loops along the cellulose-binding path between the two molecules in the asymmetric unit indicate higher flexibility than in the less thermostable H. jecorina Cel7A. [ABSTRACT FROM AUTHOR]

In an effort to characterise the whole transcriptome of the fungus Hypocrea jecorina, cDNA clones of this fungus were identified that encode for previously unknown proteins that are likely to function in biomass degradation. One of these newly identified proteins, found to be co-regulated with the major H. jecorina cellulases, is a protein that was denoted Cellulose induced protein 1 (Cip1). This protein consists of a glycoside hydrolase family 1 carbohydrate binding module connected via a linker region to a domain with yet unknown function. After cloning and expression of Cip1 in H. jecorina, the protein was purified and biochemically characterised with the aim of determining a potential enzymatic activity for the novel protein. No hydrolytic activity against any of the tested plant cell wall components was found. The proteolytic core domain of Cip1 was then crystallised, and the three-dimensional structure of this was determined to 1.5 Å resolution utilising sulphur single-wavelength anomalous dispersion phasing (sulphor-SAD). A calcium ion binding site was identified in a sequence conserved region of Cip1 and is also seen in other proteins with the same general fold as Cip1, such as many carbohydrate binding modules. The presence of this ion was found to have a structural role. The Cip1 structure was analysed and a structural homology search was performed to identify structurally related proteins. The two published structures with highest overall structural similarity to Cip1 found were two poly-lyases: CsGL, a glucuronan lyase from H. jecorina and vAL-1, an alginate lyase from the Chlorella virus. This indicates that Cip1 may be a lyase. However, initial trials did not detect significant lyase activity for Cip1. Cip1 is the first structure to be solved of the 23 currently known Cip1 sequential homologs (with a sequence identity cut-off of 25%), including both bacterial and fungal members. [ABSTRACT FROM AUTHOR]

Methylumbelliferyl-β-cellobioside ( MUF- G2) is a convenient fluorogenic substrate for certain β-glycoside hydrolases ( GH). However, hydrolysis of the aglycone is poor with GH family 6 enzymes ( GH6), despite strong binding. Prediction of the orientation of the aglycone of MUF- G2 in the +1 subsite of Hypocrea jecorina Cel6 A by automated docking suggested umbelliferyl modifications at C4 and C6 for improved recognition. Four modified umbelliferyl-β-cellobiosides [6-chloro-4-methyl- (Cl MUF); 6-chloro-4-trifluoromethyl- (ClF3 MUF); 4-phenyl- (Ph UF); 6-chloro-4-phenyl- (ClPh UF)] were synthesized and tested with GH6, GH7, GH9, GH5 and GH45 cellulases. Indeed the rate of aglycone release by H. jecorina Cel6 A was 10-150 times higher than with MUF- G2, although it was still three orders of magnitude lower than with H. jecorina Cel7 B. The 4-phenyl substitution drastically reduced the fluorescence intensity of the free aglycone, while Cl MUF- G2 could be used for determination of kcat and KM for H. jecorina Cel6 A and Thermobifida fusca Cel6 A. Crystal structures of H. jecorina Cel6 A D221 A mutant soaked with the MUF-, Cl MUF- and ClPh UF-β-cellobioside substrates show that the modifications turned the umbelliferyl group 'upside down', with the glycosidic bond better positioned for protonation than with MUF- G2. Database Structural data have been submitted to the Protein Data Bank under accession numbers pdb 4AU0, 4AX7, 4AX6 Structured digital abstract • http://mint.bio.uniroma2.it/mint/search/interaction.do?interactionAc=MINT-7260296 • Cel6A and Cel6A bind by x-ray crystallography (View Interaction: 1, 2) [ABSTRACT FROM AUTHOR]

Abstract: Cellulases, glycoside hydrolases that catalyze the degradation of cellulose, are classified as either endoglucanases or cellobiohydrolases (CBHs) based on their architecture and mode of action on the cellulose. CBHs bind the cellulose chain in a more or less closed tunnel and cleave off cellobiose units processively from one end of the cellulosic polymer, while endoglucanases have their active sites in a more or less open cleft and show a higher tendency to cut bonds internally in the polymer. The CBH Cel6A (also called CBH2) from the ascomycete Hypocrea jecorina has a much shorter substrate-binding tunnel and seems less processive than the CBH Cel7A (CBH1), from the same fungus. Here, we present the X-ray crystal structure of the catalytic domain of the CBH Cel6B, also called E3, from the soil bacterium Thermobifida fusca, both in its apo form and co-crystallized with cellobiose. The enzyme structure reveals that the Cel6B enzyme has a much longer substrate-binding site than its fungal GH6 counterparts. The tunnel is comparable in length to that of GH7 CBHs. In the ligand structure with cellobiose, the tunnel exit is completely closed by a 13-residue loop not present in fungal GH6 enzymes. The loop needs to be displaced to allow cellobiose product release for a processive action by the enzyme. When ligand is absent, seven of these residues are not visible in the electron density and the tunnel exit is open. [Copyright &y& Elsevier]