Search

Carbon nanotubes (CNTs) have the potential to serve as delivery systems for medicinal substances and gene treatments, particularly in cancer treatment. Co-delivery of curcumin (CUR) and Methotrexate (MTX) has shown promise in cancer treatment, as it uses fewer drugs and has fewer side effects. This study used MTX-conjugated albumin (BSA)-based nanoparticles (BSA-MTX) to enhance and assess the efficiency of CUR. In-vitro cytotoxicity tests, DLS, TEM, FTIR, UV/Vis, SEM, and DSC studies assessed the formulations' physical and chemical properties. The Proteinase K enzyme was used to severe amidic linkages between MTX and BSA. The findings demonstrated the efficacy of using ƒ-MWCNT-CUR-BSA-MTX as a vehicle for efficient co-delivery of CUR and MTX in cancer treatment. The MTT colorimetric method was used to evaluate the effect of chemical and medicinal compounds. Cell division was studied using the MTT method to investigate the effect of pure MWCNT, pure CUR, MTX-BSA, and ƒ-MWCNT-CUR-MTX-BSA. Studies on cell lines have shown that the combination of curcumin and MTX with CNT can increase and improve the effectiveness of both drugs against cancer. A combination of drugs curcumin and methotrexate simultaneously had a synergistic effect on MCF-7 cells, which indicated that these drugs could potentially be used as a strategy for both prevention and treatment of breast cancer. Also, ƒ-MWCNT-CUR-MTX-BSA was found to have a significant effect on cancer treatment with minimal toxicity compared to pure curcumin, pure MTX-BSA, MTX, and ƒ-MWCNT alone. Unique properties such as a high ratio of specific surface area to volume, high chemical stability, chemical adsorption ability, high capacity of drug and biomolecules of carbon nanotubes, as well as multiple drug loading at the same time The combination of ƒ-MWCNT-CUR-BSA MTX significantly impacts cancer therapy), are desirable as an alternative option for targeted drug delivery and high therapeutic efficiency., (© 2024. The Author(s).)

To conquer the low water solubility and bioavailability of curcumin (CUR), to corroborate its functional qualities and to broaden its applicability in the pharmaceutical sector, numerous nanoscale methods have been widely exploited for its administration. Because of its polycystic, biodegradable, biocompatibility, non-toxicity, and non-allergenic properties, bovine serum albumin (BSA) and glycine (Gly) have been actively investigated as natural biopolymers for decades. Various BSA and Gly-based nanocarriers with unique features for CUR delivery, such as magnetic ferrite nanoparticles, are being developed (MNPs). In this work, magnesium ferrite (MgFe 2 O 4 )/BSA and nickel ferrite (NiFe 2 O 4 )/Gly nanocomposites loaded with CUR (drug model) were manufactured for the first time using a chemical co-precipitation approach to create biocompatible drug nanocarriers. It was found that the synthesized MgFe 2 O 4 /BSA and NiFe 2 O 4 /Gly nanoparticles have a uniform particle distribution and their size is much less than 100 nm. Saturation magnetization in MgFe 2 O 4 and NiFe 2 O 4 reaches 13.07 and 33.4 emu/g the remarkable peak of magnetization decreases to 10.99 and 32.36 emu/g after the addition of polymers. These analyses also showed the presence of chemical bonds in the structure of the nanocomposite. The curcumin diffusion process in NPs were determined using a mathematical modeling. The yielding of the product for MgFe 2 O 4 /BSA and NiFe 2 O 4 /Gly in 200 h is about 72 and 63%, respectively. Also, regressed relative diffusivities (D/R 2 ), including effective steric hindrance, were determined as 5.75 × 10 -4 and 2.72 × 10 -4 h -1 for MgFe 2 O 4 /BSA and NiFe 2 O 4 /Gly, respectively. It shows that there is a significant steric barrier that significantly deviates from the molecular diffusion of the liquid. As a result, the low effective release of curcumin in the particles is more noticeable. Our study demonstrated the effective relationship between the polymer architecture and the biophysical properties of the resulting nanoparticles and shed light on new approaches for the design of efficient NP-based drug carriers.

Multifunctional nanoplatforms based on novel bimetallic nanoparticles have emerged as effective radiosensitizers owing to their potential capability in cancer cells radiosensitization. Implementation of chemotherapy along with radiotherapy, known as synchronous chemoradiotherapy, can augment the treatment efficacy. Herein, a tumor targeted nanoradiosensitizer with synchronous chemoradiotion properties, termed as CuFe 2 O 4 @BSA-FA-CUR, loaded with curcumin (CUR) and modified by bovine serum albumin (BSA) and folic acid (FA) was developed to enhance tumor accumulation and promote the anti-cancer activity while attenuating adverse effects. Both copper (Cu) and iron (Fe) were utilized in the construction of these submicron scale entities, therefore strong radiosensitization effect is anticipated by implementation of these two metals. The structure-function relationships between constituents of nanomaterials and their function led to the development of nanoscale materials with great radiosensitizing capacity and biosafety. BSA was used to anchor Fe and Cu ions but also to improve colloidal stability, blood circulation time, biocompatibility, and further functionalization. Moreover, to specifically target tumor sites and enhance cellular uptake, FA was conjugated onto the surface of hybrid bimetallic nanoparticles. Finally, CUR as a natural chemotherapeutic agent was encapsulated into the developed bimetallic nanoparticles. With incorporation of all abovementioned stages into one multifunctional nanoplatform, CuFe 2 O 4 @BSA-FA-CUR is produced for synergistic chemoradiotherapy with positive outcomes. In vitro investigation revealed that these nanoplatforms bear excellent biosafety, great tumor cell killing ability and radiosensitizing capacity. In addition, high cancer-suppression efficiency was observed through in vivo studies. It is worth mentioning that co-use of CuFe 2 O 4 @BSA-FA-CUR nanoplatforms and X-ray radiation led to complete tumor ablation in almost all of the treated mice. No mortality or radiation-induced normal tissue toxicity were observed following administration of CuFe 2 O 4 @BSA-FA-CUR nanoparticles which highlights the biosafety of these submicron scale entities. These results offer powerful evidence for the potential capability of CuFe 2 O 4 @BSA-FA-CUR in radiosensitization of malignant tumors and opens up a new avenue of research in this area., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Aim: The aim of the present investigation was to develop niosomes containing both curcumin (CUR) and methotrexate (MTX). Also, the combinational effect of CUR and MTX in both free and niosomal forms on growth inhibition potential and induction of apoptosis in the HCT-116 cell line were exploited. Materials & methods: Niosomes were prepared by the thin-film hydration method and their physicochemical properties were determined by various techniques. Cellular uptake, cell apoptosis, wound healing and MTT assay were conducted to ascertain niosomes' feasibility for cancer therapy. Results: The combination of CUR and MTX in niosomal formulation showed more toxicity than their combination in free form. Conclusion: The nanocarrier-based approach was effective for the codelivery of CUR and MTX against cancer cells in vitro .

An optimal radiosensitizer with improved tumor retention has an important effect on tumor radiation therapy. Herein, gold nanoparticles (Au NPs) and drug-containing, mPEG-conjugated CUR (mPEG-CUR), self-assembled NPs (mPEG-CUR@Au) are developed and evaluated as a drug carrier and radiosensitizer in a breast cancer mice model. As a result, cancer therapy efficacy is improved significantly by applying all-in-one NPs to achieve synchronous chemoradiotherapy, as evidenced by studies evaluating cell viability, proliferation, and ROS production. In vivo anticancer experiments show that the mPEG-CUR@Au system improves the radiation sensitivity of 4T1 mammary carcinoma and completely abrogates breast cancer., (© 2021 Wiley-VCH GmbH.)

Aim: To prepare a novel hybrid system for the controlled release and delivery of curcumin (CUR). Methods: A method for the ultrasound-assisted fabrication of protein-modified nanosized graphene oxide-like carbon-based nanoparticles (CBNPs) was developed. After being modified with bovine serum albumin (BSA), CUR was loaded onto the synthesized hybrid (labeled CBNPs@BSA-CUR). The structure and properties of the synthesized nanoparticles were elucidated using transmission electron microscopy (TEM), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods. Results: CBNPs@BSA-CUR showed pH sensitivity and were calculated as controlled CUR release behavior. The drug-free system exhibited good biocompatibility and was nontoxic. However, CBNPs@BSA-CUR showed acceptable antiproliferative ability against MCF-7 breast cancer cells. Conclusion: CBNPs@BSA-CUR could be considered a highly promising nontoxic nanocarrier for the delivery of CUR with good biosafety.

In this project, a biocompatible block copolymer including poly ethylene glycol and poly caprolactone was synthesized using ring-opening reaction. Then, the copolymer was conjugated to folic acid using lysine as a linker. Also, curcumin (CUR) was used as a therapeutic anticancer agent. Nanoprecipitation method was used to prepare CUR-loaded polymeric micelles. Different methods including Fourier-transform infrared spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS) were used to characterize the prepared nanocarriers (NCs). MTT assay and hemolysis assay were used to evaluate in vitro anticancer efficiency and biocompatibility of the prepared NCs, respectively. The results proved efficiency of NCs as a drug delivery system (DDS) in various aspects such as physicochemical properties and biocompatibility. Also, in vivo results showed that NCs did not show any severe weight loss and side effects on mice, and the anti-cancer study results of the CUR-loaded NCs proved that the conjugation of folic acid on the surface of NCs as a targeting agent could increase the therapeutic efficacy of CUR.

The goal of this work is to harness the advantages of a targeted hybrid nanostructure, BSA-coated Fe 3 O 4 (F)-Au heterodimer, as a radiosensitizer and co-delivery vehicle of chemotherapeutic drugs for enhanced synergic cancer therapy and protection of healthy tissues. F-Au-BSA-MTX-CUR combines the abilities of enhanced X-ray radiation therapy (F-Au), long blood circulation time (BSA), tumor targeting (MTX), enhanced chemotherapy (MTX and CUR), and protection of normal cells against the harmful effects of radiation (CUR). In this work, we present the radioprotective and radiosensitizing effects of CUR on normal tissues and the tumor site, respectively. After technical evaluation, drug loading, drug release behavior, hemolysis assay, transfection efficacy, and cellular uptake studies with fluorescence microscopy, the biosafety and toxicity of the nanostructure was assessed in vitro and in vivo. Also, to confirm its power to improve synergistic chemoradiation therapy in mice, the antitumor effects of the designed treatment plan were assessed in a 4T1-tumor bearing mouse model. The in vivo antitumor effect evaluation interestingly reveals outstanding therapeutic power of the final formulation (F-Au-BSA-MTX-CUR) and further requirement of CUR as a radioprotective. This result importantly revealed the radioprotection effect of CUR. Co-delivery of the chemotherapeutic drugs MTX and CUR, combined with the radiosensitizing effect of the F-Au heterodimer and the radioprotective effect of CUR, showed promising prospects in cancer therapy.

In this research, curcumin (CUR) conjugated albumin based nanoparticles (BSA-CUR) were designed for improvement and evaluation radioprotective effect of CUR. In this way, we have prepared BSA-CUR by covalently binding the CUR with BSA. Next, this synthesized prodrug was evaluated for physical and chemical properties by Fourier-transform infrared (FTIR), Dynamic light scattering (DLS), Transmission electron microscopy (TEM), Ultraviolet-visible (UV/Vis), and Differential scanning calorimetry (DSC) analysis. Furthermore, the chemical stability of designed prodrug was appraised. The result shows that the size of nanoparticles is 174.4 nm with a polydispersity index (PdI) of 0.191. The nanoparticles have a high loading capacity and show sustained release behavior. Loading of CUR to BSA not only could increase the chemical stability of CUR, but also could improve radioprotection efficacy of it's against X-Ray irradiation. The HHF-2 cells show 107% viability in the presence of BSA-CUR at a concentration of 50 µg/mL, whereas non-treated cells show 46% viability, under X-Ray irradiation. Also in vivo study results show that, four out of five mice have died when the mice irradiated by X-Ray and no received any treatment. Although, for a group that treated with BSA-CUR and also irradiated by X-Ray, median survival and survival rate was higher than CUR treated and control mice, and only two out of five mice have died. The result of this study proved that BSA-CUR can be used as a proficient vehicle for improving the potential radioprotective effect of CUR., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

In this project, a core-shell polymersome based on miktoarm star-copolymer:methoxy poly-ethylene glycol-lysine-(poly-caprolactone) 2 was synthesized by a new method as controlled targeted drug delivery systems for codelivery of the chemotherapeutic methotrexate (MTX) and curcumin (CUR). Some properties of these nanocarriers (NCs), such as surface morphology, structure, surface charge, stability, and biocompatibility, were evaluated by proton nuclear magnetic resonance, dynamic scanning colorimetry, Fourier-transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, critical aggregation concentration, hemolysis test, MTT assay, and lethal dose 50 (LD50). The AFM results showed that the uniform spherical morphology of NCs have an average size of about ∼60 nm. The drug loading of NCs was about 14.13 and 10.93% for CUR and MTX, respectively. The NCs revealed pH-sensitivity in drug release. The release of drugs from miktoarm-based NCs in neutral pH was lower than in acidic medium because of faster degradation of polymersome in acidic environment. MTT assay results showed that the drug-loaded NCs did not show significant toxicity due to which cell viability maintain over 82% at 300 μg/mL concentration. Also, synthesized miktoarm showed hemolysis lower than 3%. This result was repeated in LD50, and all mice which treat with 5000 mg/kg were still alive after 24 h. These result confirmed safety of miktoarm star copolymer. Eventually, the goal of this study is the application of water-soluble star copolymers miktoarm with pH dependent release properties for designing a new drug delivery carrier and using CUR for enhancing anticancer properties of MTX. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2817-2826, 2018., (© 2018 Wiley Periodicals, Inc.)

This study described a curcumin (CUR) loaded bovine serum albumin nanoparticles (BSA@CUR NPs), which could solubilize the poorly water-soluble drug and increase the therapeutic efficacy of the drug. BSA@CUR NPs were synthesized by a simple coacervation procedure. The resultant BSA@CUR NPs showed a spherical shape, with a diameter of 92.59±16.75nm (mean ± SD) nm and a ζ-potential of - 9.19mV. The in vitro drug release study of CUR showed a sustained and controlled release pattern. Cellular toxicity of BSA NPs was also investigated on HFF2 cell lines. Additionally, a hemolysis test of as prepared NPs were performed for investigation of hemocompatibility. Hemolysis assay and cytotoxicity study results on HFF-2 cell line show that as prepared BSA NPs are biocompatible. The in vitro anticancer activity of the BSA@CUR NPs were performed by MTT assay on MCF-7 cancer cells. These results suggest that BSA@CUR NPs are a new drug delivery system for cancer therapy., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Denderimer-modified magnetic nanoparticles are a promising drug delivery nanosystem which can improve the therapeutic efficacy of chemotherapy drugs and can also be beneficial as magnetic resonance (MR) images contrast agent. The present study introduces the preparation and characterization of the potential therapeutic efficiency of curcumin (CUR)-loaded denderimer-modified citric acid coated Fe 3 O 4 NPs. Polyamidoamine (PAMAM, generation G 5 ) was used to encapsulate citric acid coated Fe 3 O 4 nanoparticles. The successful preparation of CUR-loaded nanocarriers were confirmed by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM) techniques. The loading capacity and encapsulation efficiency of CUR molecules were 12 ± 0.03% and 45.58 ± 0.41%, respectively. The anticancer effect of void CUR and CUR-loaded nanocarriers were compared to each other by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay on treated MCF-7 cell line. It can be concluded that application of nanoparticles can be more effective strategy for controlled and slow release of CUR in human breast cancer treatment.

The bovine serum albumin-coated magnetic nanoparticles (F@BSA NPs) were prepared as curcumin (CUR) carriers through desolvation and chemical co-precipitation process. The characteristics of CUR loaded F@BSA NPs (F@BSA@CUR NPs) were determined by X-ray diffraction (XRD), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and vibrating-sampling magnetometry (VSM) techniques. It was found that the synthesized F@BSA@CUR NPs were spherical in shape with an average size of 56 ± 11.43 nm (mean ± SD (n = 33)), ζ-potential of -10.1 mV, and good magnetic responsivity. Meanwhile, the drug content of the nanoparticles was 6.88%. These F@BSA@CUR NPs also demonstrated sustained release of CUR at 37 °C in different buffer solutions. Cellular toxicity of F@BSA@CUR NPs was studied on HFF2 cell line. Also, the cytotoxicity of F@BSA@CUR NPs towards MCF-7 breast cancer cells was investigated. The results revealed that F@BSA@CUR NPs have significant cytotoxicity activity on MCF-7 cell line., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Natural products have been used for the treatment of various diseases such as cancer. Curcumin (CUR) and sulforaphane (SF) have anti-cancer effects, but their application is restricted because of their low water solubility and poor oral bioavailability. To improve the bioavailability and solubility of SF and CUR, we performed an advanced delivery of SF and CUR with PEGylated gold coated Fe 3 O 4 magnetic nanoparticles (PEGylated Fe 3 O 4 @Au NPs) to endorse SF and CUR maintenance as an effective and promising antitumor drugs. The structure of the synthesized nanocarrieris evaluated by, transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). The results revealed that the size of NPs was 20 nm. They were mono-dispersed in water, with high drug-loading capacity and stability. CUR and SF were encapsulated into NPs with loading capacity of 16.32±0.023% and 15.74±0.015% and entrapment efficiency of 74.57±0.14% and 72.20±0.18% respectively. The in-vitro study of SF and CUR loaded PEGylated Fe 3 O 4 @Au NPs on human breast adenocarcinoma cell line (SK-BR-3) confirmed that cytotoxicity of SF and CUR can enhance when they are loaded on PEGylated Fe 3 O 4 @Au NPs in comparison to Free SF and void CUR. The results of flow cytometry and real-time PCR shown that nano-carriers can increase therapeutic effects of SF and CUR by apoptosis and necrosis induction as well as inhibiting of migration in SK-BR-3 cell line., Competing Interests: Conflict of Interest: The authors report no declarations of interest., (© Georg Thieme Verlag KG Stuttgart · New York.)

Co-delivery strategy has been proposed to minimize the amount of each drug and to achieve the synergistic effect for cancer therapies. A conjugate of the antitumor drug, doxorubicin, with diblock methoxy poly (ethylene glycol)-poly caprolactone (mPEG-PCL) copolymer was synthesized by the reaction of mPEG-PCL copolymer with doxorubicin in the presence of p-nitrophenylchloroformate. The conjugated copolymer was characterized in vitro by 1 H-NMR, FTIR, DSC and GPC techniques. Then, the doxorubicin conjugated mPEG-PCL(DOX-mPEG-PCL) was self-assembled into micelles in the presence of curcumin in aqueous solution. The resulting micelles were characterized further by various techniques such as dynamic light scattering (DLS) and atomic force microscopy (AFM).The encapsulation efficiency of doxorubicin and curcumin were 82.31 ± 3.32 and 78.15 ± 3.14%, respectively. The results revealed that the micelles formed by the DOX-mPEG-PCL with and without curcumin have spherical structure with average size of 116 and 134 nm respectively. The release behavior of curcumin and doxorubicin loaded to micelles were investigated in a different media. The release rate of micelles consisted of the conjugated copolymer was pH dependent as it was higher at lower pH than in neutral condition. Another feature of the conjugated micelles was a sustained release profile. The cytotoxicity of micelles were evaluated by MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide, atetrazole) assay on lung cancer A549 cell lines. In vitro cytotoxicity assay showed that the mPEG-PCL copolymer did not affect the growth of A549 cells. The cytotoxic activity of the micelles against A549 cells was greater than free doxorubicin and free curcumin.

Curcumin (CUR) has been associated with anti-inflammatory, antimicrobial, antioxidant, anti-amyloid, and antitumor effects, but its application is limited because of its low aqueous solubility and poor oral bioavailability. To progress the bioavailability and water solubility of CUR, we synthesized five series of mono methoxy poly (ethylene glycol)-poly (ε-caprolactone) (mPEG-PCL) diblock copolymers. The structure of the copolymers was characterized by H NMR, FTIR, DSC and GPC techniques. In this study, CUR was encapsulated within micelles through a single-step nano-precipitation method, leading to formation of CUR-loaded mPEG-PCL (CUR/mPEG-PCL) micelles. The resulting micelles were characterized further by various techniques such as dynamic light scattering (DLS) and atomic force microscopy (AFM). The cytotoxicity of void CUR, mPEG-PCL and CUR/mPEG-PCL micelles was compared to each other by performing MTT assay of the treated MCF-7 and 4T1 cell line. Study of the in vivo pharmacokinetics of the CUR-loaded micelles was also carried out on selected copolymers in comparison with CUR solution formulations. The results showed that the zeta potential of CUR-loaded micelles was about -11.5mV and the average size was 81.0nm. CUR was encapsulated into mPEG-PCL micelles with loading capacity of 20.65±0.015% and entrapment efficiency of 89.32±0.34%. The plasma AUC (0-t), t 1/2 and C max of CUR micelles were increased by 52.8, 4.63 and 7.51-fold compared to the CUR solution, respectively. In vivo results showed that multiple injections of CUR-loaded micelles could prolong the circulation time and increase the therapeutic efficacy of CUR. These results suggested that mPEG-PCL micelles would be a potential carrier for CUR., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this article, Fe3O4/GO and Fe3O4/ZnO/GO nanocomposites (NPs) synthesized by thermal treatment at 823 K, and their drug delivery properties for curcumin (CUR) as an anticancer drug were investigated. The structural, morphological, and magnetic properties of these Nps were studied. The results of XRD, FTIR and EDX analyses indicated the synthesis of pure and crystalline structures of GO, Fe3O4/GO and Fe3O4/ZnO/GO NPs. Moreover, the mean size of spherical shape in Fe3O4/GO and Fe3O4/ZnO/GO nanoparticles was 42.36 and 53.21 nm, respectively. Based on the results of release and loading at different pHs, the drug is well loaded on the NPs and released at the tumor site. Based on these studies, the drug loading percentage on Fe3O4/GO is higher than Fe3O4/ZnO/GO. Also, the results showed that 41.65% of the drug is released from Fe3O4/GO and 23.43% from Fe3O4/ZnO/GO in the first ten hours after being in the cancer cell site. The Hemolysis test of prepared NPs and the cytotoxicity of NCs and CUR-loaded on NCs against U87 cancer cells and fibroblast human cells were investigated using the MTT assay. The toxic effect of Fe3O4/GO and of Fe3O4/ZnO/GO was more in U87 cancer cells compared to normal fibroblast cells. The results of anticancer activity of Nano-carriers on brain cancer cell lines revealed that CUR-loaded nanocrystals (NCs) have significant cytotoxicity activity on U87. Therefore, these NCs are capable of acting as drug delivery systems for anti-cancer drugs like CUR. [ABSTRACT FROM AUTHOR]

To conquer the low water solubility and bioavailability of curcumin (CUR), to corroborate its functional qualities and to broaden its applicability in the pharmaceutical sector, numerous nanoscale methods have been widely exploited for its administration. Because of its polycystic, biodegradable, biocompatibility, non-toxicity, and non-allergenic properties, bovine serum albumin (BSA) and glycine (Gly) have been actively investigated as natural biopolymers for decades. Various BSA and Gly-based nanocarriers with unique features for CUR delivery, such as magnetic ferrite nanoparticles, are being developed (MNPs). In this work, magnesium ferrite (MgFe2O4)/BSA and nickel ferrite (NiFe2O4)/Gly nanocomposites loaded with CUR (drug model) were manufactured for the first time using a chemical co-precipitation approach to create biocompatible drug nanocarriers. It was found that the synthesized MgFe2O4/BSA and NiFe2O4/Gly nanoparticles have a uniform particle distribution and their size is much less than 100 nm. Saturation magnetization in MgFe2O4 and NiFe2O4 reaches 13.07 and 33.4 emu/g the remarkable peak of magnetization decreases to 10.99 and 32.36 emu/g after the addition of polymers. These analyses also showed the presence of chemical bonds in the structure of the nanocomposite. The curcumin diffusion process in NPs were determined using a mathematical modeling. The yielding of the product for MgFe2O4/BSA and NiFe2O4/Gly in 200 h is about 72 and 63%, respectively. Also, regressed relative diffusivities (D/R2), including effective steric hindrance, were determined as 5.75 × 10-4 and 2.72 × 10-4 h-1 for MgFe2O4/BSA and NiFe2O4/Gly, respectively. It shows that there is a significant steric barrier that significantly deviates from the molecular diffusion of the liquid. As a result, the low effective release of curcumin in the particles is more noticeable. Our study demonstrated the effective relationship between the polymer architecture and the biophysical properties of the resulting nanoparticles and shed light on new approaches for the design of efficient NP-based drug carriers. [ABSTRACT FROM AUTHOR]

In this project, Calcium ferrite/polyvinyl alcohol (CaFe2O4@PVA) nanocarriers were prepared by a thermal-treatment method at three different temperatures (773, 823 and 923 K). The nanocarriers were used as drug delivery systems (DDS) to deliver curcumin (CUR) and were utilized as a new structure for photo dynamic therapy (PDT). Drug loading and release study of CUR were performed and it was observed that nanocarriers showed a pH dependent drug release behavior. MTT assay, Hemolysis assay and lethal dose test were applied to determine the cytotoxicity of nanocarriers. These tests indicated that synthesized nanocarriers can be considered as nontoxic. Also, the photodynamic therapy experiments were performed by two groups: one group of cells were treated by different concentrations of nanocarriers without light and the other group were exposed to light. Then, the efficacy of PDT was determined by MTT and it was revealed that whenever nanocarriers were exposed to light the cytotoxicity was significantly high. Therefore, it was revealed that these nanocarriers are suitable to be utilized as a drug delivery systems and photo dynamic therapy agent. [ABSTRACT FROM AUTHOR]

High atomic number Z, nanoparticles are able to enhance the photoelectric and Compton effects under X-Ray irradiation resulting the increase of radiation therapy efficacy. To achieve enhanced radiation therapy, Bi2S3 biocompatible particles coated with bovine serum albumin (BSA) (Bi2S3@BSA HNPs) were prepared through a BSA-mediated biomineralization procedure under green conditions. Then, to achieve improved chemo-radiation therapy against HT-29 cancer cells, curcumin (CUR) as natural anti-cancer therapy agent loaded on the Bi2S3@BSA (Bi2S3@BSA@CUR HNPs). Next, this synthesized nanodrug was evaluated for physical and chemical properties and in vitro cytotoxicity studies. Here, in vitro enhanced chemo-radiation combination therapy power was evaluated against HT-29 cell line under 2 Gy and 6 Gy X-ray irradiation doses. The Bi2S3@BSA HNPs without irradiation rarely affect cell viability which shown the non-toxicity of Bi2S3@BSA HNPs. The result of this study proved that Bi2S3@BSA@CUR HNPs can be used as both proficient vehicles for effective delivery of CUR and radiosensitizer in the treatment of cancer. In addition, the result of this study confirmed that the combination of high Z-element nanoradiosensitizer, Bi2S3@BSA HNPs, with a natural anti-cancer drug, CUR, enhanced therapeutic power against HT-29 cells. [ABSTRACT FROM AUTHOR]

In this work, we reported the synthesis of curcumin (CUR)-loaded hydrophilic and hydrophobic natural amino acids (AAs)-modified iron oxide magnetic nanoparticles (IONPs). Two types of AAs, L-lysine (Lys) and L-phenylalanine (PhA), were selected to study their effects on loading capacity, release profile of CUR, biocompatibility, and anticancer activity. CUR-loaded AAs-modified IONPs (F@AAs@CUR NPs) were characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM) techniques. Next, the various kinetic equations were fitted to the release data of CUR from F@Lys@CUR NPs and F@PhA@CUR NPs. Additionally, hemolysis test and MTT assays on HFF-2 and HEK-293 cell lines were performed for determination of biocompatibility of AAs-coated IONPs. Finally, the anticancer activity of F@AAs@CUR NPs examined on MCF-7 breast cancer cell line. The results indicate that these nanocarriers are nontoxic and biocompatible and also F@AAs@CUR NPs are suitable carriers for delivery of curcumin and even other hydrophobic drugs. Also, the MRI training established the effectiveness of IONPs as contrast agent for the revealing of tumor as evidenced from the phantom images as well as higher T2 relaxivity. [ABSTRACT FROM AUTHOR]

Co-delivery approach has been recommended to reduce the amount of each drug and to achieve the synergistic effect for cancer treatment. Curcumin (CUR) and sulforaphane (SF) have antitumor effects, but their application is limited because of their low water solubility and poor oral bioavailability. To improve the bioavailability and solubility of SF and CUR, we performed an innovative co-delivery of them with PEGylated gold coated Fe3O4 magnetic nanoparticles (PEGylated Fe3O4@Au NPs) to endorse SF and CUR maintenance as an effective and promising antitumor drugs. The structure of the synthesized nanocarriers evaluated by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, vibrating sample magnetometer, dynamic light scattering and Fourier transform infrared spectroscopy. The results revealed that the zeta potential of CUR and SF-loaded NPs were about -15.4 mV and the average sizes were 80.57 nm. They were monodispersed (polydispersity index = 0.161 ± 0.016) in water with high drug-loading capacity and stability. CUR and SF were encapsulated into NPs with loading capacity of 17.32 ± 0.023% and 16.74 ± 0.015% and the entrapment efficiency of 83.72 ± 0.14% and 81.20 ± 0.18% respectively. The in-vitro study of SF and CUR loaded PEGylated Fe3O4@Au NPs on human breast adenocarcinoma cell line (MCF-7) confirmed that cytotoxicity of SF and CUR can enhance when they are loaded on PEGylated Fe3O4@Au NPs in comparison to free SF and CUR. The results of real-time PCR and flow cytometry shown that this combination can increase therapeutic effects of SF and CUR by apoptosis and necrosis induction as well as inhibiting of migration in MCF-7 cell line. [ABSTRACT FROM AUTHOR]

Metal organic frameworks (MOFs) UiO‐66 (UiO stands for University of Oslo) and NH2‐UiO‐66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X‐ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance‐Fourier transform infrared spectroscopy (ATR‐FTIR), and N2 adsorption–desorption measurements. FESEM showed NH2‐UiO‐66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios in the feed were investigated in the present study, and this investigation revealed that when the CUR/MOFs with mass ratio was around 0.4, the absorption capacity of NH2‐UiO‐66 had tended to maximum. Although, functionalization reduced the specific surface area and free volume, introducing polar amine groups could improve the affinity of NH2‐UiO‐66 respect to CUR. Kinetic studies showed that the kinetic data are well fitted with the pseudo‐ second‐order model. MTT assay revealed that MOFs at the concentration range of 0–560 μg/ml had no cytotoxic effect on the Human Foreskin Fibroblast normal cell line (HFF‐2). These results suggest that these MOFs could be safe as sorbent for adsorb CUR from the body. [ABSTRACT FROM AUTHOR]

[Display omitted] • Synthesis a biodegradable mPEG-PCL polymer. • Conjugation of methotrexate to the copolymer. • Characterization of MTX–mPEG-PCL. • Self-assembled of MTX–mPEG-PCL into micelles in the presence of curcumin by nano-precipitation method. • Determination of drug loading and drug encapsulation. • Study the effects of cytotoxicity of methotrexate and curcumin and conjugated nanoparticles methotrexate and curcumin were investigated by MTT assay on MCF7 cancer cell lines. Therapeutic strategies used to treat cancer are focused on cytotoxic drugs as the main form of chemotherapy. Recently nanocarrier-based chemotherapy has been widely used to treat cancer. Drugs covalently attached to a polymer chain, known as prodrugs, can significantly enhance drug incorporation efficiency. This study aimed to synthesis a biodegradable mPEG-PCL copolymers for effective and targeted drug delivery of the anticancer compounds curcumin and methotrexate and to investigate their physicochemical properties and effects on breast cancer cells. In this study, mPEG-PCL copolymer was synthesized by polymerization of ὲ-Caprolactone dehydrated monomer in the presence of dry methoxy polyethylene glycol as the initiator and Sn(Oct) 2 as catalyst. The mPEG-PCL copolymers were synthesized and their structure was evaluated using Fourier Transform Infrared Spectroscopy (FTIR). Then, methotrexate was conjugated to a copolymer. The methotrexate conjugated mPEG–PCL(MTX–mPEG-PCL) was self-assembled into micelles in the presence of curcumin by nano-precipitation method and the drug loading was assessed. Finally, the cytotoxicity of methotrexate, curcumin and conjugated nanoparticles with methotrexate and curcumin were investigated through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay on Michigan Cancer Foundation-7 (MCF-7) cancer cell lines. The size of mPEG-PCL-MTX and mPEG-PCL-MTX-CUR nanoparticles were evaluated by zeta sizer with an average size of 51.89 ± 0.46 nm (PDI = 0.127), and 88.21 ± 0.31 nm (PDI = 0.344), respectively. The zeta potential of nanoparticles was −4.22 mV. FTIR studies showed methotrexate was conjugated to the copolymer. The amount of drug released in nanoparticles at pH = 5.5 was higher than pH = 7.4. By increasing the drug concentration in the drug-carrying nanosystem, cell survival was further reduced. Among the treatment groups, mPEG-PCL-MTX-CUR group demonstrated the greatest impact, while, the MTX group showed the least impact on cancer cell mortality. These findings suggest that micelles conjugated with MTX and loading CUR appear to be promising systems for achieving Enhanced Permeability and Retention (EPR) effect, and pH sensitivity, which could improve the release and accumulation of drugs at tumor sites. [ABSTRACT FROM AUTHOR]

Purpose: Among the potent anticancer agents, curcumin is known as a very efficacious against many different types of cancer cells, but its clinical applications has been limited because of hydrophobicity, low gastrointestinal absorption, poor bioavailability and rapid metabolism. In this way, a novel micellar delivery system with mPEG-PCL was synthesized and the release profile of the curcumin from the drug-loaded micelles was evaluated. Methods: In this study, curcumin was encapsulated within monomethoxypoly(ethylene glycol)-poly(e-caprolactone) (mPEG-PCL) micelles through a single-step nano-precipitation method, leading to creation of curcumin-loaded mPEG-PCL (Cur/mPEG-PCL) micelles. Diblock mPEG-PCL copolymers were synthesized and used to prepare micelles. mPEG-PCL copolymer was characterized in vitro by HNMR, FTIR, DSC and GPC techniques. Then, mPEG-PCL copolymers with curcumin were self-assembled into micelles in aqueous solution. The resulting micelles were characterized further by various techniques such as dynamic light scattering (DLS) and atomic force microscopy (AFM). Results: The findings showed the successful formation of smooth and spherical curcuminloaded micelles. The encapsulation efficiency of curcumin was 88 ± 3.32%. The results of AFM revealed that the micelles have spherical shapes with size of 73.8 nm. The release behavior of curcumin from micelles was compared in different media. In vitro release of curcumin from curcumin-entrapped micelles was followed remarkably sustained profile. The sustained release of drug was hypothetically due to the entrapment of curcumin in core of micelles. Conclusion: The results indicate the successful formulation of curcumin loaded m- PEG/PCL micelles. From the results, iIt can be concluded that curcumin m-PEG-PCL micelles may be considered as an effective treatment strategy for cancer in the future. [ABSTRACT FROM AUTHOR]

In this study we described the production of curcumin (CUR) loaded L‐tyrosine (Tyr coated Fe3O4 magnetic nanoparticles. CUR loaded Tyr modified Fe3O4 nanoparticles (F@Tyr@CUR NPs) were analyzed by transmission electron microscopy, fourier transform infrared spectroscopy, thermo gravimetric analysis, vibrating sample magnetometer, X‐ray diffraction and dynamic light scattering techniques. The dynamic light scattering results showed that the ζ‐potential of F@Tyr@CUR NPs was about −15.4 mV. Also, the internal average size was about 25.81 ± 3.31 (mean ± SD (n = 30)) nm. The drug loading and encapsulation efficiency were 8.87 ± 0.09% and 35.21 ± 0.41%, respectively. In addition, hemolysis test on human red blood cells were conducted to determine the hemocompatibility of F@Tyr@CUR NPs. Next, MTT assays on HEK‐293 were conducted to determine the toxicity of F@Tyr@CUR NPs. Lastly, the potential anticancer effect of F@Tyr@CUR NPs was considered on MCF‐7 cancer cell line. The outcomes indicated that these F@Tyr@CUR NPs are appropriate for delivery of CUR anticancer drug. Also, the MRI training established the effectiveness of Fe3O4 magnetic nanoparticles as contrast agent for the revealing of tumor as evidenced from the phantom images as well as higher T2 relaxivity. We have identified and developed a biocompatible drug delivery system (F@Tyr NPs), which could be used to delivery of chemotherapeutic agents such as CUR. Also, the MRI study demonstrated the effectiveness of Fe3O4 nanoparticles as contrast agent for the early detection of tumor as evidenced from the phantom images as well as higher T2 relaxivity. [ABSTRACT FROM AUTHOR]

Abstract The present paper aimed to synthesize, using thermal-treatment method, a variety of Co 1-X Zn x Fe 2 O 4 -based nanocarriers (NCs) as Dual-controlled and targeted drug delivery systems (DDS) and provide a new structure as NCs suitable for the loading and pH-responsive characteristics of the chemotherapeutic curcumin (CUR). To study the structure, surface morphology, surface charge and magnetic properties of NCs, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), Zetasizer and vibrating sample magnetometer (VSM) were applied here. TEM images of Co 0.2 Zn 0.8 Fe 2 O 4 (Co-0.2) showed that NCs had a uniform spherical mesoporous morphology with an average grain size of about ∼17 nm. Also, it was found that Drug loading was very high, about 22.70 and 21.99 for Co 0.6 Zn 0.4 Fe 2 O 4 (Co-0.6) and Co 0.4 Zn 0.6 Fe 2 O 4 (Co-0.4), respectively. As indicated, NCs had highly pH-dependent drug release behavior, although different and unique in every one of them, which could be related to zeta potential of Co-0.6. In fact, the neutral zeta potential of Co-0.6 became positive when the pH of releasing media changed from 7.4 to 5.5. Consequently, the hydrogen bond between the Co-0.6 and CUR brake. Therefore, as expected, drug releasing varied from Co-0.6 to about 54% at pH 5.5, rather 29% at pH 7.4. To determine the cytotoxicity of NCs, hemolysis assay, MTT assay and acute toxicity test were used. The tests showed that NCs had the least in vitro and in vivo cytotoxicity and NCs, as a result, could be regarded to be nontoxic. MTT results demonstrated that drug loaded NCs had the same cell viability as bare drugs. Then, it can be concluded that these NCs have the potential required to act as drug delivery systems for anti-cancer drugs delivery such as CUR. Highlights • Co 1−X Zn x Fe 2 O 4 based nanocarriers (NCs) as Dual controlled targeted drug delivery systems (DDS) were synthesized. • Zeta potential at different pH, could control the release of CUR from NCs. • We controlled the release of CUR from NCs with replacing appropriate ratio of Zn and Co instead of Fe. • NCs had great in vivo and in vitro biocompatibility. • Small size of drug loaded-NCs and their stability can help to accumulate drugs in tumor site. [ABSTRACT FROM AUTHOR]

• We employed the BSA molecules as a biocompatible vehicle for co-drug delivery. • A mean particle size around 140 nm with a PDI of 0.366 has been observed. • The TEM analysis result shows that CUR-MTX-BSA existed in a spherical structure. • These results show that MTX-BSA and CUR-MTX-BSA reduced the IC50 value against 4T1 cells. In this project methotrexate (MTX) conjugated albumin based nanoparticles (MTX-BSA) loaded with curcumin (CUR) drug (CUR-MTX-BSA) for simultaneous delivery of multi-chemotherapeutic drugs and combination cancer therapy were designed. Co-delivery is a new strategy which minimize the amount of each drug, reduce of side effects and also to achieve the synergistic effect for cancer therapies. The MTX was conjugated to albumin via covalent bond. Next, this synthesized prodrug loaded with CUR. Afterward, the formulations were evaluated for physical and chemical properties by DLS, TEM, FTIR, UV/Vis, DSC analysis, in vitro cytotoxicity and in vivo biocompatibility studies. Furthermore, the drug loading and release study were evaluated. Proteinase K enzyme was used to break amid bond between MTX and BSA and also amidic bonds in BSA structure. Administration of up to 2000 mg/kg of BSA to healthy animals was non-toxic and all treated mice were still alive after 24 h. The result of this study proved that CUR-MTX-BSA can be used as a proficient vehicle for effective co-delivery of CUR and MTX in the treatment of cancer. [ABSTRACT FROM AUTHOR]