Search

This paper focuses on the vacuum arc commutating characteristic (VACC) between the parallel-connected vacuum arc and the shunt resistor, which is the base of the postarc current (PAC) measure. The test platform is established in the synthetic test circuit. The influence of the current magnitude, shunt resistor, arcing time and current frequency on time of the current commutation and the current in the moment of the completion transition is investigated. The mathematic description of the VACC is obtained, which is useful to parameter design of the PAC measure. The PAC of 10-kV vacuum circuit breakers is measured in synthetic test circuit. The photos of the vacuum arc and the waveform of the current commutation are gained to verify the success of the commutation. In conclusion, the VACC is gained and applied to measure the PAC. [ABSTRACT FROM PUBLISHER]

This paper investigates the influence of the axial magnetic field (AMF) arc control on voltage distribution (VD) of double-break vacuum circuit breakers (VCBs) in order to gain balanced VD, and thus enhance the breaking capacity. The interaction of vacuum arc plasma, postarc current (PAC), and AMF is discussed. We conduct the breaking test of double-break VCBs with externally applied AMF of a different pulsewidth, magnitude, and a different moment. The PAC, postarc charge, and the VD are measured to analyze the relationship between the AMF arc control and the VD. The optimal AMF arc control and the relationship between the AMF magnitude and the unbalanced voltage ratio are gained when the grading capacitors were 400 pF. The experimental test showed that the proper AMF arc control can improve the unbalanced VD. The mechanism is that the proper AMF arc control can make the postarc charge small and stable, so the unbalanced postarc charge, which caused the unbalanced VD is limited. [ABSTRACT FROM AUTHOR]

In order to find the synergy of double-break vacuum circuit breakers (VCBs), we conducted a synthetic test including different vacuum gaps, different type electrodes, and different grading capacitors. The double-break VCBs are composed of Axial Magnetic Field (AMF) and Transverse Magnetic Field (TMF) contact VCBs, which can constitute four combinations. The optimal combination of AMF and TMF type electrodes was obtained by comparing with the breaking capacity and voltage distribution of the four combinations. The breaking capacity of double-break VCB with AMF and TMF type electrodes in series while the AMF interrupter is on the lower side is largest because the voltage distribution is the most even which is caused by the different equivalent capacitances of different interrupters. The optimal matching vacuum gaps of the best combination were obtained by a synthetic test of different vacuum gaps, which may make the grading capacitors of double-break VCBs small, even obsolete. The combination of maximum breaking capacity was series AMF type interrupters with suitable grading capacitors of 500–2000 pF. The experimental results provide the best combination and matching control mode for VCBs with double-break. [ABSTRACT FROM PUBLISHER]