Search

For switched mode power converters, boundary conduction mode (BCM) operation is an attractive alternative to improve the bandwidth, overall size, and efficiency. In this article, a sensorless ripple current mode (SRCM) controller is proposed to achieve inductor-deviation-tolerant BCM operation for boost converter. Compared to conventional approaches with current sensing or ZCD, the proposed controller relies on a digital algorithm to ensure consistent BCM operation. The algorithm calculates on/off durations of the main switch so that the inductor current valley value converges to zero. The convergence process is proved by a damped current model with considerations of parasitics and output voltage ripple. Since the convergence is not related to the inductor value, the SRCM controller achieves inductor-deviation-tolerant BCM operation. Furthermore, to improve the power efficiency, an optimal transition condition and a compensation time are adopted to achieve valley switching (VS). Finally, both consistent BCM operation and VS are achieved by the proposed control strategy. Simulations and experimental results prove that the controller effectively improves the closed-loop stability, the robustness to inductor deviation, and the power efficiency. [ABSTRACT FROM AUTHOR]

Digital peak current mode (DPCM) control is widely used for dc–dc converters operating in continuous current mode. However, current tracking delay (CTD) in the system is normally neglected in the modeling stage, which leads to poor compensator design and degraded performance. This paper investigates CTD effect in boost converter with different DPCM controls. Based on dynamic relationship between the reference current and actual inductor current, the CTD transfer functions are derived, which improves the accuracy of small signal model. Since CTD degrades the phase margin of the system, equivalent migration of right half plane zero is proposed to model CTD effect. This method is very simple and straightforward, which facilitates the compensator design. Furthermore, two novel DPCM control strategies with minimized CTD are proposed, and they are based on duty cycle restriction and duty cycle extension, respectively. Both controls greatly reduce the CTD effect and improve the response speed. Besides, the duty cycle extension benefits from an extended pulsewidth modulation (ExPWM). This optimizes the calculation algorithm and speed, while improving the time margin for digital calculations. Combined with the proposed models and controls, the CTD effect is greatly reduced. The effectiveness is verified through detailed simulations and experiments. [ABSTRACT FROM AUTHOR]