Search

This paper presents a triple-mode average current control (TACC) strategy to achieve unity power factor and reduce the current stress for a boost PFC converter. The controller switches among different modes in each half-line cycle, and smooth transition is ensured by mapping of the operation region. By adaptive mode shifting, it reduces the current stress and current distortion caused by non-linear effects. With valley current shaping and comparisons, the TACC controller accordingly incorporates three control laws to adapt different modes. In discontinuous conduction mode (DCM), a variable on-time is calculated while the modulation is equivalent to PWM. In critical conduction mode (CRM), a constant on-time is derived, while the switching cycle is modified to regulate the current average value. For both DCM and CRM, the switching cycle is slightly extended to realize valley switching. Furthermore, with valley current shaping, the proposed controller reuses the CRM calculation to form continuous conduction mode (CCM) control law. To make the control laws compatible, normalized mapping and design rules are provided with respect to mode boundaries. This allows the TACC controller to automatically switch among different modes. Finally, experimental results prove the effectiveness of the controller in reducing the current stress and enlarging the preferable power range. [ABSTRACT FROM AUTHOR]

For switched mode power converters, boundary conduction mode (BCM) operation is an attractive alternative to improve the bandwidth, overall size, and efficiency. In this article, a sensorless ripple current mode (SRCM) controller is proposed to achieve inductor-deviation-tolerant BCM operation for boost converter. Compared to conventional approaches with current sensing or ZCD, the proposed controller relies on a digital algorithm to ensure consistent BCM operation. The algorithm calculates on/off durations of the main switch so that the inductor current valley value converges to zero. The convergence process is proved by a damped current model with considerations of parasitics and output voltage ripple. Since the convergence is not related to the inductor value, the SRCM controller achieves inductor-deviation-tolerant BCM operation. Furthermore, to improve the power efficiency, an optimal transition condition and a compensation time are adopted to achieve valley switching (VS). Finally, both consistent BCM operation and VS are achieved by the proposed control strategy. Simulations and experimental results prove that the controller effectively improves the closed-loop stability, the robustness to inductor deviation, and the power efficiency. [ABSTRACT FROM AUTHOR]

Digital peak current mode (DPCM) control is widely used for dc–dc converters operating in continuous current mode. However, current tracking delay (CTD) in the system is normally neglected in the modeling stage, which leads to poor compensator design and degraded performance. This paper investigates CTD effect in boost converter with different DPCM controls. Based on dynamic relationship between the reference current and actual inductor current, the CTD transfer functions are derived, which improves the accuracy of small signal model. Since CTD degrades the phase margin of the system, equivalent migration of right half plane zero is proposed to model CTD effect. This method is very simple and straightforward, which facilitates the compensator design. Furthermore, two novel DPCM control strategies with minimized CTD are proposed, and they are based on duty cycle restriction and duty cycle extension, respectively. Both controls greatly reduce the CTD effect and improve the response speed. Besides, the duty cycle extension benefits from an extended pulsewidth modulation (ExPWM). This optimizes the calculation algorithm and speed, while improving the time margin for digital calculations. Combined with the proposed models and controls, the CTD effect is greatly reduced. The effectiveness is verified through detailed simulations and experiments. [ABSTRACT FROM AUTHOR]

For boost power converter with Sensorless Current Mode (SCM) control, the inductor current is acquired by current estimator instead of current sensing. Without consideration of parasitics, the estimator is low-accurate, which affects system Small Signal Model (SSM) and degrades the control performance. In this paper, the issue is studied in frequency domain, and solved by a Corrective Frequency Compensation for Parasitics (CFCP) strategy. First, transfer functions for power converter, current estimator and current mode controller are given for frequency-domain analysis. Second, without consideration of parasitics, conventional proportional integral compensation is used to improve the system stability. Furthermore, with consideration of parasitics, converter main pole is replaced by two poles while a zero emerges at the origin. In order to cancel out the influence, the proposed CFCP strategy adopts a second-order transfer function to correct zero/pole variation induced by parasitics. Finally, steady state performance and transient response of the converter are improved, which are verified by simulations and experiments. [ABSTRACT FROM AUTHOR]