Search

In service, railway tracks must withstand the transverse and longitudinal forces that are caused by running vehicles and thermal loads. The mechanical design that adopts any of the track models available in the technical literature requires that the strength of the track is fully characterised. In this paper, the results of an experimental research activity on the sleeper--ballast resistance along the lateral and the longitudinal directions are reported and discussed. In particular, the work is aimed at identifying the strength contributions offered by the base, the ballast between the sleepers, and the ballast shoulder to the global resistance of the track in the horizontal plane. These quantities were experimentally determined by means of an ad hoc system designed by the authors. Field tests were carried out on a series of track sections that were built to simulate scenarios in which the ballast was removed from the crib and/or the shoulder. The results of this study indicate that the strength percent contributions from the crib, the sleeper base, and the shoulder are, respectively, equal to about 50%, 25%, and 25% in the lateral direction, and 60%, 30%, and 10% in the longitudinal direction. Moreover, the comparison of the acquired data with literature results reveals that a detailed knowledge about the testing conditions and the activated ballast failure mechanisms is needed in order to correctly use the test data for the design purpose. [ABSTRACT FROM AUTHOR]

In the present paper the design and construction choices of a test field for the ballast lateral resistance measurement, in order to produce data useful for the development of a numerical model able to simulate the service critical conditions of a continuous welded rail track, are described. Some construction details described herein allow to better understand the methodological approach followed in the design of experiments, the tests management philosophy as well as of the accuracy achieved in their implementation. [ABSTRACT FROM AUTHOR]

Several studies have been carried out until now by various Research Agencies and Railway Administrations to quantify the effects of the track-bed geometrical characteristics on the transverse strength of the track. Unfortunately, not all the possible scenarios in terms of track components, track-bed cross profile, operating conditions etc. have been investigated and not all the relevant variables have been directly measured. Therefore data available from the literature have different degrees of reliability. With the aim of enlarging the knowledge on the track stability and covering much of the possible relevant scenarios, an experimental research program has been developed in the framework of a cooperation between RFI, Italcertifer and DII. In order to perform the investigation under quite general conditions and to reduce the experimentation costs, n. 28 significant scenarios have been identified and reproduced on as many independent track segments. By applying on each track segment a transversal load, the strength of the ballast-sleeper interface has been determined. The results relative to the first four scenarios are presented in terms of applied load vs. lateral track displacement diagrams and in more synthetic numerical tables. [ABSTRACT FROM AUTHOR]