Search

X-ray emission characterization provides valuable insights about electron cyclotron resonance (ECR) plasmas. In principle, space-resolved spectroscopic techniques can be used to reveal spatial distributions of electron density and temperature. In the PANDORA (Plasma for Astrophysics, Nuclear Decay Observation, and Radiation for Archaeometry) project framework, and within the collaboration between the Atomki and INFN-LNS laboratories, we developed a high-resolution full-field x-ray pinhole setup. This setup incorporates advanced analysis techniques for single photon counted imaging in high dynamical range mode, enabling x-ray imaging and space-resolved spectroscopy at high spatial and energy resolution (560 μ m and 242 eV @ 8.1 keV, respectively). Here, we introduce an innovative technique for quantitatively evaluating the local electron density and temperature of plasma, as the first application of such a method in an ECR setup. Specifically, we examine an argon plasma heated by 200 W microwave power at 14 GHz. Our analysis includes a retrospective comparison with past x-ray data collected from other ECR ion source setups. Our findings clearly reveal the formation of a plasmoid–halo structure within the plasma chamber, characterized by a dense and hot plasma almost totally enclosed inside the ECR magnetic iso-surface (the plasmoid). This plasmoid exhibits nearly uniform distribution of electron density and temperature, with only gentle gradients of both the parameters toward its edges. Inside the halo, x-ray emission is minimal or even negligible. Notably, cusp structures correspond to magnetic branches where deconfined electrons impinge upon the plasma chamber walls and endplates. The average values of temperature and density measured inside the plasmoid are 12.44 ± 1.84 keV and (1.66 ± 0.15) × 10 17 m − 3 , respectively. [ABSTRACT FROM AUTHOR]

A numerical tool for analyzing spatially anisotropic electron populations in electron cyclotron resonance (ECR) plasmas has been developed, using a trial-and-error electron energy distribution function (EEDF) fitting method. The method was tested on space-resolved warm electrons in the energy range 2 – 20 keV , obtained from self-consistent simulations modeling only electron dynamics in ECR devices, but lacked real-world validation. For experimentally benchmarking the method, we attempted to use the tested EEDF to numerically reproduce experimental x-ray emission spectrum measured from an argon plasma. The analysis revealed a stronger contribution from hot electrons than expected, and this information will be fed back to simulation models to generate more realistic data. Subsequent application of the numerical tool to the improved simulation data can result in continuous EEDFs that reflect the nature of charge distributions in anisotropic ECR plasmas. These functions can be also applied to electron-dependent reactions, in order to reproduce experimental results, like those concerning space-dependent Kα emissions. [ABSTRACT FROM AUTHOR]

Imaging of the electron cyclotron resonance (ECR) plasmas by using CCD camera in combination with a pinhole is a non-destructive diagnostics method to record the strongly inhomogeneous spatial density distribution of the X-ray emitted by the plasma and by the chamber walls. This method can provide information on the location of the collisions between warm electrons and multiple charged ions/atoms, opening the possibility to investigate the direct effect of the ion source tuning parameters to the plasma structure. The first successful experiment with a pinhole X-ray camera was carried out in the Atomki ECR Laboratory more than 10 years ago. The goal of that experiment was to make the first ECR X-ray photos and to carry out simple studies on the effect of some setting parameters (magnetic field, extraction, disc voltage, gas mixing, etc.). Recently, intensive efforts were taken to investigate now the effect of different RF resonant modes to the plasma structure. Comparing to the 2002 experiment, this campaign used wider instrumental stock: CCD camera with a lead pinhole was placed at the injection side allowing X-ray imaging and beam extraction simultaneously. Additionally, Silicon Drift Detector (SDD) and High Purity Germanium (HPGe) detectors were installed to characterize the volumetric X-ray emission rate caused by the warm and hot electron domains. In this paper, detailed comparison study on the two X-ray camera and detector setups and also on the technical and scientific goals of the experiments is presented. [ABSTRACT FROM AUTHOR]

Heavy ion radiotherapy awakens worldwide interest recently. The clinical results obtained by the Heavy Ion Medical Accelerator in Chiba at the National Institute of Radiological Sciences in Japan have clearly demonstrated the advantages of carbon ion radiotherapy. Presently, there are four facilities for heavy ion radiotherapy in operation, and several new facilities are under construction or being planned. The most common requests for ion sources are a long lifetime and good stability and reproducibility. Sufficient intensity has been achieved by electron cyclotron resonance ion sources at the present facilities. [ABSTRACT FROM AUTHOR]

We report on the modification of fullerenes with iron and chlorine using two individually controllable plasmas in the Bio-Nano electron cyclotron resonance ion source (ECRIS). One of the plasmas is composed of fullerene and the other one is composed of iron and chlorine. The online ion beam analysis allows one to investigate the rate of the vapor-phase collisional modification process in the ECRIS, while the offline analyses (e.g., liquid chromatography-mass spectrometry) of the materials deposited on the plasma chamber can give information on the surface-type process. Both analytical methods show the presence of modified fullerenes such as fullerene-chlorine, fullerene-iron, and fullerene-chlorine-iron. [ABSTRACT FROM AUTHOR]

In the paper, the material science experiments, carried out recently using the Bio-Nano electron cyclotron resonance ion source (ECRIS) at Toyo University, are reported. We have investigated several methods to synthesize endohedral C60 using ion-ion and ion-molecule collision reaction in the ECRIS. Because of the simplicity of the configuration, we can install a large choice of additional equipment in the ECRIS. The Bio-Nano ECRIS is suitable not only to test the materials production but also to test technical developments to improve or understand the performance of an ECRIS. [ABSTRACT FROM AUTHOR]

A synthesis technology of endohedral fullerenes such as Fe@C60 has developed with an electron cyclotron resonance (ECR) ion source. The production of N@C60 was reported. However, the yield was quite low, since most fullerene molecules were broken in the ECR plasma. We have adopted gas-mixing techniques in order to cool the plasma and then reduce fullerene dissociation. Mass spectra of ion beams extracted from fullerene-He, Ar or Xe mixed plasmas were observed with a Faraday cup. From the results, the He gas mixing technique is effective against fullerene destruction. [ABSTRACT FROM AUTHOR]