Search

Constrained codes are used to prevent errors from occurring in various data storage and data transmission systems. They can help in increasing the storage density of magnetic storage devices, in managing the lifetime of solid-state storage devices, and in increasing the reliability of data transmission over wires. Over the years, designing practical (complexity-wise) capacity-achieving constrained codes has been an area of research gaining significant interest. We recently designed various constrained codes based on lexicographic indexing. We introduced binary symmetric lexicographically-ordered constrained (S-LOCO) codes, $q$ -ary asymmetric LOCO (QA-LOCO) codes, and a class of two-dimensional LOCO (TD-LOCO) codes. These families of codes achieve capacity with simple encoding and decoding, and they are easy to reconfigure. We demonstrated that these codes can contribute to notable density and lifetime gains in magnetic recording (MR) and Flash systems, and they find application in other systems too. In this paper, we generalize our work on LOCO codes by presenting a systematic method that guides the code designer to build any constrained code based on lexicographic indexing once the finite set of data patterns to forbid is known. In particular, we connect the set of forbidden patterns directly to the cardinality of the LOCO code and most importantly to the rule that uncovers the index associated with a LOCO codeword. By doing that, we reveal the secret arithmetic of patterns, and make the design of such constrained codes significantly easier. We give examples illustrating the method via codes based on lexicographic indexing from the literature. We then design optimal (rate-wise) constrained codes for the new two-dimensional magnetic recording (TDMR) technology. Over a practical TDMR model, we show notable performance gains as a result of solely applying the new codes. Moreover, we show how near-optimal constrained codes for TDMR can be designed and used to further reduce complexity and error propagation. All the newly introduced LOCO codes are designed using the proposed general method, and they inherit all the desirable properties in our previously designed LOCO codes. [ABSTRACT FROM AUTHOR]

In various practical systems, certain data patterns are prone to errors if written or transmitted. In magnetic recording and communication over transmission lines, data patterns causing consecutive transitions that are not sufficiently separated are prone to errors. In Flash memory with two levels per cell, data patterns causing high–low–high charge levels on adjacent cells are prone to errors. Constrained codes are used to eliminate error-prone patterns, and they can also achieve other goals. Recently, we introduced efficient binary symmetric lexicographically-ordered constrained (LOCO) codes and asymmetric LOCO (A-LOCO) codes to increase density in magnetic recording systems and lifetime in Flash systems by eliminating the relevant detrimental patterns. Due to their application, LOCO and A-LOCO codes are associated with level-based signaling. Studying the power spectrum of a random signal with certain properties is principal for any storage or transmission system. It reveals important properties such as the average signal power at DC, the bandwidth of the signal, and whether there are discrete power components at certain frequencies. In this paper, we first modify a framework from the literature in order to introduce a method to derive the power spectrum of a sequence of constrained data associated with level-based signaling. We apply our method to infinitely long sequences satisfying symmetric and asymmetric constraints. Next, we show how to generalize the method such that it works for a stream of finite-length codewords as well, thus demonstrating how to overcome the associated finite-length challenges. We use the generalized method to devise closed forms for the spectra of finite-length LOCO and A-LOCO codes from their transition diagrams. Our LOCO and A-LOCO spectral derivations can be performed for any code length and can be extended to other constrained codes. We plot these power spectra, and discuss various important spectral properties for both LOCO and A-LOCO codes. We also briefly discuss an alternative method for deriving the power spectrum and introduce an idea towards reaching the spectra of self-clocked codes. [ABSTRACT FROM AUTHOR]

The two-dimensional magnetic recording (TDMR) technology promises storage densities of 10 Tbits/in2. However, when tracks are squeezed together, a bit stored in the two-dimensional (TD) grid suffers inter-symbol interference (ISI) from adjacent bits in the same track and inter-track interference (ITI) from nearby bits in the adjacent tracks. A bit is highly likely to be read incorrectly if it is isolated in the middle of a $3 \times 3$ square, surrounded by its complements, horizontally and vertically. We improve the reliability of TDMR systems by designing TD constrained codes that prevent these square isolation patterns. We exploit the way TD read heads operate to design our codes, and we focus on TD read heads that collect signals from three adjacent tracks. We represent the two-dimensional square isolation constraint as a one-dimensional constraint on an alphabet of eight non-binary symbols. We use this new representation to construct a non-binary lexicographically-ordered constrained code where one third of the input information bits are unconstrained. Our TD constraint codes are capacity-achieving, and the data protection is achieved with redundancy less than 3% and at modest complexity. [ABSTRACT FROM AUTHOR]

The increasing demand for access to data has led to dramatic increases in data storage densities, and as densities increase, new sources of error appear. Multi-dimensional (MD) graph-based codes are capable of mitigating error sources like interference and channel non-uniformity in dense storage devices. A recent innovation improves the performance of MD spatially-coupled codes that are based on circulants by carefully relocating some circulants to minimize the number of short cycles. However, cycles become more detrimental when they combine together to form more advanced objects, e.g., absorbing sets, including low-weight codewords. In this paper, we show how MD relocations can be exploited to minimize the number of detrimental objects in the graph of an MD code. Moreover, we demonstrate the savings in the number of relocation arrangements earned by focusing on objects rather than their constituent cycles. Our technique is applicable to a wide variety of one-dimensional (OD) codes. Simulation results demonstrate significant lifetime gains achieved by the proposed MD codes on an industry-recommended model for Flash systems, and signal-to-noise ratio gains on an industry-recommended model for magnetic recording systems, both with respect to OD codes with similar parameters. The second order analysis of MD relocations relies on conditions and options for an object, called a pattern, to form a bigger cycle after MD relocations, which are discussed in this paper. [ABSTRACT FROM AUTHOR]

Because of their capacity-approaching performance and their complexity/latency advantages, spatially-coupled (SC) codes are among the most attractive error-correcting codes for use in modern dense data storage systems. SC codes are constructed by partitioning an underlying block code and coupling the partitioned components. Here, we focus on circulant-based SC codes. Recently, the optimal overlap (OO), circulant power optimizer (CPO) approach was introduced to construct high performance SC codes for additive white Gaussian noise (AWGN) and Flash channels. The OO stage operates on the protograph of the SC code to derive the optimal partitioning that minimizes the number of graphical objects that undermine the performance of SC codes under iterative decoding. Then, the CPO optimizes the circulant powers to further reduce this number. Since the nature of detrimental objects in the graph of a code critically depends on the characteristics of the channel of interest, extending the OO-CPO approach to construct SC codes for channels with intrinsic memory is not a straightforward task. In this paper, we tackle one relevant extension; we construct high performance SC codes for practical 1-D magnetic recording channels, i.e., partial-response (PR) channels. Via combinatorial techniques, we carefully build and solve the optimization problem of the OO partitioning, focusing on the objects of interest in the case of PR channels. Then, we customize the CPO to further reduce the number of these objects in the graph of the code. SC codes designed using the proposed OO-CPO approach for PR channels outperform prior state-of-the-art SC codes by up to around 3 orders of magnitude in frame error rate (FER) and 1.1 dB in signal-to-noise ratio (SNR). More intriguingly, our SC codes outperform structured block codes of the same length and rate by up to around 1.8 orders of magnitude in FER and 0.4 dB in SNR. The performance advantage of SC codes designed using the devised OO-CPO approach over block codes of the same parameters is not only pronounced in the error floor region, but also in the waterfall region. [ABSTRACT FROM AUTHOR]

Line codes make it possible to mitigate interference, to prevent short pulses, and to generate streams of bipolar signals with no direct-current (DC) power content through balancing. They find application in magnetic recording (MR) devices, in Flash devices, in optical recording devices, and in some computer standards. This paper introduces a new family of fixed-length, binary constrained codes, named lexicographically-ordered constrained codes (LOCO codes), for bipolar non-return-to-zero signaling. LOCO codes are capacity-achieving, the lexicographic indexing enables simple, practical encoding and decoding, and this simplicity is demonstrated through analysis of circuit complexity. LOCO codes are easy to balance, and their inherent symmetry minimizes the rate loss with respect to unbalanced codes having the same constraints. Furthermore, LOCO codes that forbid certain patterns can be used to alleviate inter-symbol interference in MR systems and inter-cell interference in Flash systems. Numerical results demonstrate a gain of up to 10% in rate achieved by LOCO codes with respect to other practical constrained codes, including run-length-limited codes, designed for the same purpose. Simulation results suggest that it is possible to achieve a channel density gain of about 20% in MR systems by using a LOCO code to encode only the parity bits, limiting the rate loss, of a low-density parity-check code before writing. [ABSTRACT FROM AUTHOR]