Search

This paper proposes a medium-/high-voltage high-power hybrid modular dc–dc converter to interconnect two different dc-voltage levels in medium-/high-voltage dc grids. The converter consists of half-bridge submodules (SMs) rated at a moderate voltage level, i.e., series connection of semiconductor devices is avoided while connecting two high dc-voltage levels. The proposed architecture provides self-balancing operation, i.e., unlike conventional modular converters, no need for capacitor voltage measurement, which enhances the system reliability and simplicity. Sequential charging/discharging of SMs capacitors is adopted in the proposed approach to ensure a self-balanced operation. The proposed architecture can provide a high conversion ratio as well as power transfer in both directions, i.e., bidirectional dc–dc converter. Detailed illustration of the proposed approach operational concept, design, and overall control system is presented. Simulation and experimental results are presented to show the viability of the proposed configuration and validate the claims. [ABSTRACT FROM AUTHOR]

This article proposes a new active power flow controller for dc–dc multiactive bridge (MAB) converters with minimum current point tracking (MCPT) to minimize conductive losses. Unlike recent efforts in this area, the proposed controller does not require look-up table for implementation nor complex nonlinear converter modeling and is not circuit parameter dependent. The proposed control scheme is also generalized for MAB converters with any number of ports and is derived in per unit form to enable standard implementation for buck/boost/unity-gain operating modes. The proposed MCPT algorithm is based on an innovative adaptive perturb and observe tracking of the minimum current point (MCP) on the MAB converter current characteristic plane. This MCP is tracked while active power regulation is simultaneously achieved based on a new phase shift decoupler to enable direct regulation of individual port active power. Detailed design procedure of the proposed controller is presented and extensive simulation is carried out to validate the effectiveness of the proposed MCPT closed loop controller. Experimental implementation is also provided to substantiate the simulation results. [ABSTRACT FROM AUTHOR]