Search

In this paper, the averaged small-signal model of the dual-interleaved buck converter is extended to include the phase interaction effects that arise from the interleaved sampling of the phase currents. Sampler decomposition techniques are used to extend the averaged model, revealing a slow-scale instability that can place significant restrictions on the choice of controller parameters. The model is confirmed by simulations and measurements using a 60-kW dual-interleaved prototype with an interphase transformer; however, the analysis is equally applicable to interleaved converters without magnetic coupling. [ABSTRACT FROM AUTHOR]

The design of a 200-A, all-SiC power-module-based on bipolar junction transistor devices is described, and the impact of the module is assessed on the performance of a 50-kW dc-dc converter for electric vehicle applications, particularly the overall weight and efficiency. Using a hard-switching dual-interleaved topology, which has proven high efficiency and high-power density capability, the operation of a 50-kW, 75-kHz all-SiC converter is compared with that of an insulated-gate bipolar transistor-based silicon converter, switching at 25 kHz, each providing 600-V output. The results show that the total losses are reduced by almost 40%, whilst the overall weight is reduced by 27%, achieving a power density of 10.5 kW/kg. Experimental results of the SiC converter operating at 220-600 V, 52.8 kW are provided, showing an efficiency of 97%. [ABSTRACT FROM AUTHOR]

A two-phase buck–boost converter utilizing dual interleaving is presented in this article. The dual interleaving consists of an interphase transformer (IPT) that doubles the ripple frequency together with two conventional buck–boost switching arms, mitigating the inductor ripple current and aiding to increase the power density of the converter. A description of the design and selection of the power devices is presented for a 32-kW, 75-kHz dual interleaved SiC prototype with an IPT, such that a power density of 7.4 kW/kg is achieved. The operation of the circuit is verified experimentally using a prototype with 315–385 V supply range and 350-V output voltage, achieving 97.1% peak efficiency at 32 kW. The experiments reveal that the interleaved coupled currents are equalized without an active balancer. [ABSTRACT FROM AUTHOR]

A concern with the isolation transformer in a dual active bridge (DAB) dc–dc converter is the dc bias in magnetization. This article proposes a fluxgate-based current sensor to measure the dc component mixed with a large, high-frequency ac current. Compared with a commercial Hall effect current sensor, the proposed sensor significantly reduces measurement error. This article presents the working principle and design considerations. A prototype is demonstrated for dc bias elimination control in a DAB converter. [ABSTRACT FROM AUTHOR]