Search

With some advantages, such as electric isolation, high efficiency, and fast dynamic response, the input-series output-parallel (ISOP) dual-active-bridge (DAB) dc–dc converter has been regarded as one of the most promising candidates for connecting the medium voltage terminal and the low voltage terminal. For the ISOP DAB dc–dc converter, the existing control strategies are mainly focusing on the equivalent power sharing control, but the fast-dynamic response is not included and the decoupling between the regulation of input voltage and the adjustment of output voltage is not eliminated significantly. In this article, the average model of this ISOP DAB dc–dc converter is presented first, which can be employed to analyze the power distributions of this modular topology clearly. Then, an input-oriented power sharing control scheme with fast-dynamic response is proposed for ensuring both the power sharing ability and the fast-dynamic performance of the ISOP DAB dc–dc converter in this article. Compared with the existing methods, this proposed scheme can also significantly reduce the coupling between the power sharing control and the output voltage regulation. In addition, an inductance-estimating method is proposed for ensuring the power sharing performance of the ISOP DAB dc–dc converter. Finally, the experimental results are provided to verify the effectiveness of the proposed input-oriented power sharing control with fast-dynamic response for the ISOP DAB dc–dc converter system. [ABSTRACT FROM AUTHOR]

Benefitting from some significant advantages, the dual active bridge (DAB) dc–dc converter has become one of the most promising candidates for dc–dc power conversion. In recent years, some strategies have been proposed to boost the dynamic performance of DAB dc–dc converter under the disturbance of input voltage and load condition. According to the relationship between the compensation part and the model-based part, these existing schemes can be divided into two structures including the parallel structure and series structure. In the parallel control structure, the compensation part is added to the model-based part. In contrast, the compensation part is multiplied with the model-based part in the series control structure. By adopting proper feedback control, both control structures can provide excellent dynamic performance for DAB dc–dc converter easily. Hence, the modified parallel-structure fast-dynamic control scheme and the modified series-structure fast-dynamic control scheme are both proposed in this article. Then, using these two proposed schemes as examples, the merits and the demerits of both structures are analyzed, and the corresponding compensation methods are also presented. Moreover, a general PI design principle of the model-based control scheme for the DAB dc–dc converter is provided, which is different from the traditional concept for designing the PI parameters. In addition, the control delay of these two proposed schemes is analyzed, and a compensation method is also proposed. Finally, simulation results and experimental results are obtained to verify the analysis in this article and the excellent performance of the proposed methods. [ABSTRACT FROM AUTHOR]

The dual-active-bridge (DAB) dc–dc converter is a promising candidate for the isolated dc–dc power transferred applications, such as in the dc distribution system, the solid-state transformer, and the energy storage system. In these applications, the fast-dynamic response is usually a core requirement, especially under load changes. To improve the dynamic performance of the DAB dc–dc converter, this article proposes a simple load-current-estimating (LCE) scheme with delay compensation for fast dynamic performance. Based on the current flowing model of the DAB dc–dc converter, the LCE strategy is proposed with single-phase-shift modulation method. Moreover, the inherent switching-period delay phenomenon of the LCE scheme is analyzed. Therefore, the corresponding delay compensation method is proposed for further boosting dynamic responses, and the dynamic limitation of the LCE scheme may be obtained for DAB dc–dc converter. Then, for the proposed LCE scheme, a damping coefficient is introduced to restrict the potential instability caused by the measurement noise, and the fast-dynamic response will be influenced a little when the load resistor is changed. In addition, the extended rule for the optimized triple-phase-shift modulation method is discussed. Finally, the simulation result and the experimental result both validate the fast-dynamic performance of this proposed LCE strategy without or with delay compensation. [ABSTRACT FROM AUTHOR]

Along with the development of the renewable energy, such as the photovoltaics and the wind turbine, the energy storage system (ESS) is becoming as a critical part for the renewable-based microgrids. In this article, dual-active-bridge (DAB) dc–dc converter with bidirectional power flowing ability, wide soft-switching range, and ultrafast dynamic characteristic is adopted for integrating multiple energy storage units (ESUs) for balancing the power flowing between the renewable energy and the loads in a islanded dc microgrids. For the multiple DAB-based ESS, a communication-free power management strategy is proposed in this article to maintain the dc-link voltage for the islanded dc microgrid, and high robustness of the dc-link voltage can be ensured when the output voltage of energy storage equipment, the load condition, and the power sharing performance of the ESS are changed. The proposed strategy also ensures seamless ESU plug-in or plug-out operations. Finally, the small-scale simulation model and experimental platform are both employed to verify the effectiveness of the proposed communication-free power management scheme. [ABSTRACT FROM AUTHOR]

The centralized output-parallel dual-active-bridge (OP-DAB) dc–dc system is a promising candidate for achieving isolated dc–dc energy conversion with large current and power rating. To implement the flexible power sharing performance of the OP-DAB dc–dc converter, a simple tunable power sharing (TPS) strategy is proposed with the single-phase-shift method in this article. Based on the TPS strategy, the excellent dynamic performance under disturbances of input voltage for each module and load resistor can be provided. However, inaccurate circuit-parameter information always damages the power sharing performance among different DAB converters. Therefore, the comprehensive circuit-parameter estimating schemes proposed for different conditions of the OP-DAB dc–dc system including the start-up process, the working process and plugging-in a new DAB dc–dc converter, respectively. Moreover, the hot swap (plug-in and plug-out) control methods of the DAB converter without large influence on output voltage is also discussed in detail. Experimental results are obtained to verify the analysis in this article and the excellent performance of the proposed methods. [ABSTRACT FROM AUTHOR]

The nonresonant single-phase dual-active-bridge (NSDAB) dc–dc converter has been increasingly adopted for isolated dc–dc power conversion systems. Over the past few years, significant research has been carried out to address the technical challenges associated with modulations and controls of the NSDAB dc–dc converter. The aim of this paper is to review and compare these recent state-of-the-art modulation and control strategies. First, the modulation strategies for the NSDAB dc–dc converter are analyzed. All possible phase-shift patterns are demonstrated, and the correlation analysis of the typical phases-shift modulation methods for the NSDAB dc–dc converter is presented. Then, an overview of steady-state efficiency-optimization strategies is discussed for the NSDAB dc–dc converter. Moreover, a review of optimized techniques for dynamic responses is also provided. For both the efficiency and dynamic optimizations, thorough comparisons and recommendations are provided in this paper. Finally, to improve both steady-state and transient performances, a combination approach to optimize both the efficiency and dynamics for an NSDAB dc–dc converter based on the reviewed methods is presented in this paper. [ABSTRACT FROM AUTHOR]

One of the essential requirements for high-performance dual active bridge (DAB) dc–dc converters as the controlled dc voltage sources is to obtain the constant output voltage rapidly and accurately under all working conditions. In order to reach fast dynamic response, combing direct power control with feedforward control strategy, this paper proposes a virtual direct power control (VDPC) scheme with single-phase-shift control for DAB dc–dc converters to face with these following extreme conditions, such as start-up, load step-change, no-load, the input voltage fluctuation, and the desired output voltage step-change. The proposed VDPC scheme of DAB dc–dc converters can achieve no overshoot and fast transient response for the output voltage in load or input voltage disturbances and start-up stage. Dynamic response of the output voltage control has been also improved when the desired value steps up and down. Finally, four control schemes consisting of traditional voltage loop control, load current feed-forward control, model-based phase-shift control, and the proposed VDPC schemes are compared and tested in a scale-down DAB dc–dc converter experimental prototype. Experimental results verify the above excellent performance of the proposed VDPC scheme and the effectiveness of theoretical analysis. [ABSTRACT FROM AUTHOR]

To reduce current stress and improve efficiency of dual active bridge (DAB) dc–dc converters, various control schemes have been proposed in recent decades. Most control schemes for directly minimizing power losses from power loss modeling analysis and optimization aspect of the adopted converter are too difficult and complicated to implement in real-time digital microcontrollers. Thus, this paper focuses on a simple solution to reduce current stress and improve the efficiency of the adopted DAB converter. However, traditional current-stress-optimized (CSO) schemes have some drawbacks, such as inductance dependency and an additional load-current sensor. In this paper, a simple CSO scheme with a unified phase-shift (UPS) control, which can be equivalent to the existing conventional phase-shift controls, is proposed for DAB dc–dc converters to realize current stress optimization. The simple CSO scheme can overcome those drawbacks of traditional CSO schemes, gain the minimum current stress, and improve efficiency. Then, a comparison of single-phase-shift (SPS) control, simple CSO scheme with dual-phase-shift (CSO-DPS) control, simple CSO scheme with extended-phase-shift (CSO-EPS) control, and simple CSO scheme with UPS (CSO-UPS) control is analyzed in detail. Finally, experimental results verify the excellent performance of the proposed CSO-UPS control scheme and the correctness of theoretical analysis. [ABSTRACT FROM AUTHOR]