Search

In this paper, we investigate the throughput performance of single-packet and multi-packet hybrid-automatic repeat request (HARQ) with blanking for downlink non-orthogonal multiple access (NOMA) systems. While conventional single-packet HARQ achieves high throughput at the expense of high latency, multi-packet HARQ, where several data packets are sent in the same channel block, can achieve high throughput with low latency. Previous works have shown that multi-packet HARQ outperforms single-packet HARQ in orthogonal multiple access (OMA) systems, especially in the moderate to high signal-to-noise ratio regime. This work amalgamates multi-packet HARQ with NOMA to achieve higher throughput than the conventional single-packet HARQ and OMA, which has been adopted in the legacy mobile networks. We conduct theoretical analysis for the throughput per user and also investigate the optimization of the power and rate allocations of the packets, in order to maximize the weighted-sum throughput. It is demonstrated that the gain of multi-packet HARQ over the single-packet HARQ in NOMA systems is reduced compared to that obtained in OMA systems due to inter-user interference. It is also shown that NOMA-HARQ cannot achieve any throughput gain with respect to OMA-HARQ when the error propagation rate of the NOMA detector is above a certain threshold. [ABSTRACT FROM AUTHOR]

Targeting to provide reliable short-packet communications with tens of bits in machine-type networks, we investigate a novel sparse code multiple access (SCMA) scheme called delayed bit-interleaved coded SCMA (DBIC-SCMA). At the transmitter side, a delay module is introduced between each channel encoder and SCMA mapper such that data bits from different channel codewords can be mapped to an identical SCMA codeword. We present the main components and principles for the transmitter of DBIC-SCMA, followed by a pre-decoding assisted receiver design which exploits systematic and rate-adaptive properties of certain channel codes. Our simulation results show that the proposed DBIC-SCMA leads to significant improvements in error rate performance over the classical BIC-SCMA scheme. [ABSTRACT FROM AUTHOR]

This paper considers the problem of source coding with side information at the decoder, also called Slepian–Wolf source coding scheme. In practical applications of this coding scheme, the statistical relation between the source and the side information can vary from one data transmission to another, and there is a need to adapt the coding rate depending on the current statistical relation. In this paper, we propose a novel rate-adaptive code construction based on LDPC codes for the Slepian–Wolf source coding scheme. The proposed code design method allows to optimize the code degree distributions at all the considered rates, while minimizing the amount of short cycles in the parity check matrices at all rates. Simulation results show that the proposed method greatly reduces the source coding rate compared to the standard low density parity check accumulated (LDPCA) solution. [ABSTRACT FROM AUTHOR]