Search

Purpose: To conduct a volumetric and movement analysis of lung parenchyma in prone positioning using deep neural networks (DNNs)., Method: We included patients with suspected interstitial lung abnormalities or disease who underwent full-inspiratory supine and prone chest CT at a single institution between June 2021 and March 2022. A thoracic radiologist visually assessed the fibrosis extent in the total lung (using units of 10%) on supine CT. After preprocessing the images into 192×192×192 resolution, a DNN automatically segmented the whole lung and pulmonary lobes in prone and supine CT images. Affine registration matched the patient's center and location, and the DNN deformably registered prone and supine CT images to calculate the x-, y-, z-axis, and 3D pixel movements., Results: In total, 108 CT pairs had successful registration. Prone positioning significantly increased the left lower (90.2±69.5 mL, P = 0.000) and right lower lobar volumes (52.5±74.2 mL, P = 0.000). During deformable registration, the average maximum whole-lung pixel movements between the two positions were 1.5, 1.9, 1.6, and 2.8 cm in each axis and 3D plane. Compared to patients with <30% fibrosis, those with ≥30% fibrosis had smaller volume changes (P<0.001) and smaller pixel movements in all axes between the positions (P = 0.000-0.007). Forced vital capacity (FVC) correlated with the left lower lobar volume increase (Spearman correlation coefficient, 0.238) and the maximum whole-lung pixel movements in all axes (coefficients, 0.311 to 0.357)., Conclusions: Prone positioning led to the preferential expansion of the lower lobes, correlated with FVC, and lung fibrosis limited lung expansion during prone positioning., Competing Interests: I have read the journal’s policy and the authors of this manuscript have the following competing interests: Soon Ho Yoon works in the MEDICALIP as a chief medical officer. This does not alter our adherence to PLOS ONE policies on sharing data and materials. The other author do not have any conflicts of interest to declare for this article., (Copyright: © 2024 Park, Yoon. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

A novel 3D nnU-Net-based of algorithm was developed for fully-automated multi-organ segmentation in abdominal CT, applicable to both non-contrast and post-contrast images. The algorithm was trained using dual-energy CT (DECT)-obtained portal venous phase (PVP) and spatiotemporally-matched virtual non-contrast images, and tested using a single-energy (SE) CT dataset comprising PVP and true non-contrast (TNC) images. The algorithm showed robust accuracy in segmenting the liver, spleen, right kidney (RK), and left kidney (LK), with mean dice similarity coefficients (DSCs) exceeding 0.94 for each organ, regardless of contrast enhancement. However, pancreas segmentation demonstrated slightly lower performance with mean DSCs of around 0.8. In organ volume estimation, the algorithm demonstrated excellent agreement with ground-truth measurements for the liver, spleen, RK, and LK (intraclass correlation coefficients [ICCs] > 0.95); while the pancreas showed good agreements (ICC = 0.792 in SE-PVP, 0.840 in TNC). Accurate volume estimation within a 10% deviation from ground-truth was achieved in over 90% of cases involving the liver, spleen, RK, and LK. These findings indicate the efficacy of our 3D nnU-Net-based algorithm, developed using DECT images, which provides precise segmentation of the liver, spleen, and RK and LK in both non-contrast and post-contrast CT images, enabling reliable organ volumetry, albeit with relatively reduced performance for the pancreas., (© 2024. The Author(s).)

Purpose: To prospectively evaluate whether Lung-RADS classification and volumetric nodule assessment were feasible with ultralow-dose (ULD) chest CT scans with deep learning image reconstruction (DLIR)., Methods: The institutional review board approved this prospective study. This study included 40 patients (mean age, 66±12 years; 21 women). Participants sequentially underwent LDCT and ULDCT (CTDIvol, 0.96±0.15 mGy and 0.12±0.01 mGy) scans reconstructed with the adaptive statistical iterative reconstruction-V 50% (ASIR-V50) and DLIR. CT image quality was compared subjectively and objectively. The pulmonary nodules were assessed visually by two readers using the Lung-RADS 1.1 and automatically using a computerized assisted tool., Results: DLIR provided a significantly higher signal-to-noise ratio for LDCT and ULDCT images than ASIR-V50 (all P < .001). In general, DLIR showed superior subjective image quality for ULDCT images (P < .001) and comparable quality for LDCT images compared to ASIR-V50 (P = .01-1). The per-nodule sensitivities of observers for Lung-RADS category 3-4 nodules were 70.6-88.2% and 64.7-82.4% for DLIR-LDCT and DLIR-ULDCT images (P = 1) and categories were mostly concordant within observers. The per-nodule sensitivities of the computer-assisted detection for nodules ≥4 mm were 72.1% and 67.4% on DLIR-LDCT and ULDCT images (P = .50). The 95% limits of agreement for nodule volume differences between DLIR-LDCT and ULDCT images (-85.6 to 78.7 mm3) was similar to the within-scan nodule volume differences between DLIR- and ASIR-V50-LDCT images (-63.9 to 78.5 mm3), with volume differences smaller than 25% in 88.5% and 92.3% of nodules, respectively (P = .65)., Conclusion: DLIR enabled comparable Lung-RADS and volumetric nodule assessments on ULDCT images to LDCT images., Competing Interests: This work was supported by GE Healthcare (Grant number: 06-2020-0300). There are no patents, products in development, or marketed products associated with this research to declare. This does not alter our adherence to PLOS ONE policies on sharing data and materials., (Copyright: © 2024 Yoo et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Objective: To investigate the prognostic value of deep learning (DL)-driven CT fibrosis quantification in idiopathic pulmonary fibrosis (IPF)., Methods: Patients diagnosed with IPF who underwent nonenhanced chest CT and spirometry between 2005 and 2009 were retrospectively collected. Proportions of normal (CT-Norm%) and fibrotic lung volume (CT-Fib%) were calculated on CT using the DL software. The correlations of CT-Norm% and CT-Fib% with forced vital capacity (FVC) and diffusion capacity of carbon monoxide (D LCO ) were evaluated. The multivariable-adjusted hazard ratios (HRs) of CT-Norm% and CT-Fib% for overall survival were calculated with clinical and physiologic variables as covariates using Cox regression. The feasibility of substituting CT-Norm% for D LCO in the GAP index was investigated using time-dependent areas under the receiver operating characteristic curve (TD-AUCs) at 3 years., Results: In total, 161 patients (median age [IQR], 68 [62-73] years; 104 men) were evaluated. CT-Norm% and CT-Fib% showed significant correlations with FVC (Pearson's r, 0.40 for CT-Norm% and - 0.37 for CT-Fib%; both p < 0.001) and D LCO (0.52 for CT-Norm% and - 0.46 for CT-Fib%; both p < 0.001). On multivariable Cox regression, both CT-Norm% and CT-Fib% were independent prognostic factors when adjusted to age, sex, smoking status, comorbid chronic diseases, FVC, and D LCO (HRs, 0.98 [95% CI 0.97-0.99; p < 0.001] for CT-Norm% at 3 years and 1.03 [1.01-1.05; p = 0.01] for CT-Fib%). Substituting CT-Norm% for D LCO showed comparable discrimination to the original GAP index (TD-AUC, 0.82 [0.78-0.85] vs. 0.82 [0.79-0.86]; p = 0.75)., Conclusion: CT-Norm% and CT-Fib% calculated using chest CT-based deep learning software were independent prognostic factors for overall survival in IPF., Key Points: • Normal and fibrotic lung volume proportions were automatically calculated using commercial deep learning software from chest CT taken from 161 patients diagnosed with idiopathic pulmonary fibrosis. • CT-quantified volumetric parameters from commercial deep learning software were correlated with forced vital capacity (Pearson's r, 0.40 for normal and - 0.37 for fibrotic lung volume proportions) and diffusion capacity of carbon monoxide (Pearson's r, 0.52 and - 0.46, respectively). • Normal and fibrotic lung volume proportions (hazard ratios, 0.98 and 1.04; both p < 0.001) independently predicted overall survival when adjusted for clinical and physiologic variables., (© 2023. The Author(s), under exclusive licence to European Society of Radiology.)

Objective: We aimed to investigate whether image standardization using deep learning-based computed tomography (CT) image conversion would improve the performance of deep learning-based automated hepatic segmentation across various reconstruction methods., Materials and Methods: We collected contrast-enhanced dual-energy CT of the abdomen that was obtained using various reconstruction methods, including filtered back projection, iterative reconstruction, optimum contrast, and monoenergetic images with 40, 60, and 80 keV. A deep learning based image conversion algorithm was developed to standardize the CT images using 142 CT examinations (128 for training and 14 for tuning). A separate set of 43 CT examinations from 42 patients (mean age, 10.1 years) was used as the test data. A commercial software program (MEDIP PRO v2.0.0.0, MEDICALIP Co. Ltd.) based on 2D U-NET was used to create liver segmentation masks with liver volume. The original 80 keV images were used as the ground truth. We used the paired t -test to compare the segmentation performance in the Dice similarity coefficient (DSC) and difference ratio of the liver volume relative to the ground truth volume before and after image standardization. The concordance correlation coefficient (CCC) was used to assess the agreement between the segmented liver volume and ground-truth volume., Results: The original CT images showed variable and poor segmentation performances. The standardized images achieved significantly higher DSCs for liver segmentation than the original images (DSC [original, 5.40%-91.27%] vs. [standardized, 93.16%-96.74%], all P < 0.001). The difference ratio of liver volume also decreased significantly after image conversion (original, 9.84%-91.37% vs. standardized, 1.99%-4.41%). In all protocols, CCCs improved after image conversion (original, -0.006-0.964 vs. standardized, 0.990-0.998)., Conclusion: Deep learning-based CT image standardization can improve the performance of automated hepatic segmentation using CT images reconstructed using various methods. Deep learning-based CT image conversion may have the potential to improve the generalizability of the segmentation network., Competing Interests: Soon Ho Yoon works as a chief medical officer in MEDICAL IP and has a stock option in the firm, outside the present study. Young Hun Choi and Jung-Eun Cheon, contributing editors of the Korean Journal of Radiology, was not involved in the editorial evaluation or decision to publish this article. Other remaining authors have declared no conflicts of interest., (Copyright © 2023 The Korean Society of Radiology.)

Background Total lung capacity (TLC) has been estimated with use of chest radiographs based on time-consuming methods, such as planimetric techniques and manual measurements. Purpose To develop a deep learning-based, multidimensional model capable of estimating TLC from chest radiographs and demographic variables and validate its technical performance and clinical utility with use of multicenter retrospective data sets. Materials and Methods A deep learning model was pretrained with use of 50 000 consecutive chest CT scans performed between January 2015 and June 2017. The model was fine-tuned on 3523 pairs of posteroanterior chest radiographs and plethysmographic TLC measurements from consecutive patients who underwent pulmonary function testing on the same day. The model was tested with multicenter retrospective data sets from two tertiary care centers and one community hospital, including (a) an external test set 1 ( n = 207) and external test set 2 ( n = 216) for technical performance and (b) patients with idiopathic pulmonary fibrosis ( n = 217) for clinical utility. Technical performance was evaluated with use of various agreement measures, and clinical utility was assessed in terms of the prognostic value for overall survival with use of multivariable Cox regression. Results The mean absolute difference and within-subject SD between observed and estimated TLC were 0.69 L and 0.73 L, respectively, in the external test set 1 (161 men; median age, 70 years [IQR: 61-76 years]) and 0.52 L and 0.53 L in the external test set 2 (113 men; median age, 63 years [IQR: 51-70 years]). In patients with idiopathic pulmonary fibrosis (145 men; median age, 67 years [IQR: 61-73 years]), greater estimated TLC percentage was associated with lower mortality risk (adjusted hazard ratio, 0.97 per percent; 95% CI: 0.95, 0.98; P < .001). Conclusion A fully automatic, deep learning-based model estimated total lung capacity from chest radiographs, and the model predicted survival in idiopathic pulmonary fibrosis. © RSNA, 2022 Online supplemental material is available for this article. See also the editorial by Sorkness in this issue.

Background: An artificial intelligence (AI) model using chest radiography (CXR) may provide good performance in making prognoses for COVID-19., Objective: We aimed to develop and validate a prediction model using CXR based on an AI model and clinical variables to predict clinical outcomes in patients with COVID-19., Methods: This retrospective longitudinal study included patients hospitalized for COVID-19 at multiple COVID-19 medical centers between February 2020 and October 2020. Patients at Boramae Medical Center were randomly classified into training, validation, and internal testing sets (at a ratio of 8:1:1, respectively). An AI model using initial CXR images as input, a logistic regression model using clinical information, and a combined model using the output of the AI model (as CXR score) and clinical information were developed and trained to predict hospital length of stay (LOS) ≤2 weeks, need for oxygen supplementation, and acute respiratory distress syndrome (ARDS). The models were externally validated in the Korean Imaging Cohort of COVID-19 data set for discrimination and calibration., Results: The AI model using CXR and the logistic regression model using clinical variables were suboptimal to predict hospital LOS ≤2 weeks or the need for oxygen supplementation but performed acceptably in the prediction of ARDS (AI model area under the curve [AUC] 0.782, 95% CI 0.720-0.845; logistic regression model AUC 0.878, 95% CI 0.838-0.919). The combined model performed better in predicting the need for oxygen supplementation (AUC 0.704, 95% CI 0.646-0.762) and ARDS (AUC 0.890, 95% CI 0.853-0.928) compared to the CXR score alone. Both the AI and combined models showed good calibration for predicting ARDS (P=.079 and P=.859)., Conclusions: The combined prediction model, comprising the CXR score and clinical information, was externally validated as having acceptable performance in predicting severe illness and excellent performance in predicting ARDS in patients with COVID-19., (©Hyun Woo Lee, Hyun Jun Yang, Hyungjin Kim, Ue-Hwan Kim, Dong Hyun Kim, Soon Ho Yoon, Soo-Youn Ham, Bo Da Nam, Kum Ju Chae, Dabee Lee, Jin Young Yoo, So Hyeon Bak, Jin Young Kim, Jin Hwan Kim, Ki Beom Kim, Jung Im Jung, Jae-Kwang Lim, Jong Eun Lee, Myung Jin Chung, Young Kyung Lee, Young Seon Kim, Sang Min Lee, Woocheol Kwon, Chang Min Park, Yun-Hyeon Kim, Yeon Joo Jeong, Kwang Nam Jin, Jin Mo Goo. Originally published in the Journal of Medical Internet Research (https://www.jmir.org), 16.02.2023.)

Objectives: To develop an automatic segmentation algorithm using a deep neural network with transfer learning applicable to whole-body PET-CT images in children., Methods: For model development, we utilized transfer learning with a pre-trained model based on adult patients. We used CT images of 31 pediatric patients under 19 years of age (mean age, 9.6 years) who underwent PET-CT from institution #1 for transfer learning. Two radiologists manually labeled the skin, bone, muscle, abdominal visceral fat, subcutaneous fat, internal organs, and central nervous system in each CT slice and used these as references. For external validation, we collected 14 pediatric PET/CT scans from institution #2 (mean age, 9.1 years). The Dice similarity coefficients (DSCs), sensitivities, and precision were compared between the algorithms before and after transfer learning. In addition, we evaluated segmentation performance according to sex, age (≤ 8 vs. > 8 years), and body mass index (BMI, ≤ 20 vs. > 20 kg/m 2 )., Results: The algorithm after transfer learning showed better performance than the algorithm before transfer learning for all body compositions (p < 0.001). The average DSC, sensitivity, and precision of each algorithm before and after transfer learning were 98.23% and 99.28%, 98.16% and 99.28%, and 98.29% and 99.28%, respectively. The segmentation performance of the algorithm was generally not affected by age, sex, or BMI, except for precision in the body muscle compartment., Conclusion: The developed model with transfer learning enabled accurate and fully automated segmentation of multiple tissues on whole-body CT scans in children., Key Points: • We utilized transfer learning with a pre-trained segmentation algorithm for adult to develop an algorithm for automated segmentation of pediatric whole-body CT. • This algorithm showed excellent performance and was not affected by sex, age, or body mass index, except for precision in body muscle., (© 2022. The Author(s), under exclusive licence to European Society of Radiology.)

Background: Prognostic prediction of nontuberculous mycobacteria pulmonary disease using a deep learning technique has not been attempted., Research Question: Can a deep learning (DL) model using chest radiography predict the prognosis of nontuberculous mycobacteria pulmonary disease?, Study Design and Methods: Patients who received a diagnosis of nontuberculous mycobacteria pulmonary disease at Seoul National University Hospital (training and validation dataset) between January 2000 and December 2015 and at Seoul Metropolitan Government-Boramae Medical Center (test dataset) between January 2006 and December 2015 were included. We trained DL models to predict the 3-, 5-, and 10-year overall mortality using baseline chest radiographs at diagnosis. We tested the predictability for the corresponding mortality using only DL-driven radiographic scores and using both radiographic scores and clinical information (age, sex, BMI, and mycobacterial species)., Results: The datasets comprised 1,638 (training and validation set) and 566 (test set) chest radiographs from 1,034 and 200 patients, respectively. The Dl-driven radiographic score provided areas under the receiver operating characteristic curve (AUC) of 0.844, 0.781, and 0.792 for 10-, 5-, and 3-year mortality, respectively. The logistic regression model using both the radiographic score and clinical information provided AUCs of 0.922, 0.942, and 0.865 for the 10-, 5, and 3-year mortality, respectively., Interpretation: The DL model we developed could predict the mid-term to-long-term mortality of patients with nontuberculous mycobacteria pulmonary disease using a baseline radiograph at diagnosis, and the predictability increased with clinical information., (Copyright © 2022 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.)

Objective: We aimed to develop and validate the automatic quantification of coronavirus disease 2019 (COVID-19) pneumonia on computed tomography (CT) images., Methods: This retrospective study included 176 chest CT scans of 131 COVID-19 patients from 14 Korean and Chinese institutions from January 23 to March 15, 2020. Two experienced radiologists semiautomatically drew pneumonia masks on CT images to develop the 2D U-Net for segmenting pneumonia. External validation was performed using Japanese (n = 101), Italian (n = 99), Radiopaedia (n = 9), and Chinese data sets (n = 10). The primary measures for the system's performance were correlation coefficients for extent (%) and weight (g) of pneumonia in comparison with visual CT scores or human-derived segmentation. Multivariable logistic regression analyses were performed to evaluate the association of the extent and weight with symptoms in the Japanese data set and composite outcome (respiratory failure and death) in the Spanish data set (n = 115)., Results: In the internal test data set, the intraclass correlation coefficients between U-Net outputs and references for the extent and weight were 0.990 and 0.993. In the Japanese data set, the Pearson correlation coefficients between U-Net outputs and visual CT scores were 0.908 and 0.899. In the other external data sets, intraclass correlation coefficients were between 0.949-0.965 (extent) and between 0.978-0.993 (weight). Extent and weight in the top quartile were independently associated with symptoms (odds ratio, 5.523 and 10.561; P = 0.041 and 0.016) and the composite outcome (odds ratio, 9.365 and 7.085; P = 0.021 and P = 0.035)., Conclusions: Automatically quantified CT extent and weight of COVID-19 pneumonia were well correlated with human-derived references and independently associated with symptoms and prognosis in multinational external data sets., Competing Interests: S.H.Y. is the chief medical officer of MEDICALIP, Co, Ltd. J.M.G. had grants from Infinitt Healthcare, grants from Dongkook Lifescience, outside the submitted work. Other authors have no potential conflicts of interest to disclose., (Copyright © 2022 Wolters Kluwer Health, Inc. All rights reserved.)

Objectives: To develop a deep learning-based pulmonary vessel segmentation algorithm (DLVS) from noncontrast chest CT and to investigate its clinical implications in assessing vascular remodeling of chronic obstructive lung disease (COPD) patients., Methods: For development, 104 pulmonary CT angiography scans (49,054 slices) using a dual-source CT were collected, and spatiotemporally matched virtual noncontrast and 50-keV images were generated. Vessel maps were extracted from the 50-keV images. The 3-dimensional U-Net-based DLVS was trained to segment pulmonary vessels (with a vessel map as the output) from virtual noncontrast images (as the input). For external validation, vendor-independent noncontrast CT images (n = 14) and the VESSEL 12 challenge open dataset (n = 3) were used. For each case, 200 points were selected including 20 intra-lesional points, and the probability value for each point was extracted. For clinical validation, we included 281 COPD patients with low-dose noncontrast CTs. The DLVS-calculated volume of vessels with a cross-sectional area < 5 mm 2 (PVV5) and the PVV5 divided by total vessel volume (%PVV5) were measured., Results: DLVS correctly segmented 99.1% of the intravascular points (1,387/1,400) and 93.1% of the extravascular points (1,309/1,400). The areas-under-the receiver-operating characteristic curve (AUROCs) were 0.977 and 0.969 for the two external validation datasets. For the COPD patients, both PPV5 and %PPV5 successfully differentiated severe patients whose FEV1 < 50 (AUROCs; 0.715 and 0.804) and were significantly correlated with the emphysema index (Ps < .05)., Conclusions: DLVS successfully segmented pulmonary vessels on noncontrast chest CT by utilizing spatiotemporally matched 50-keV images from a dual-source CT scanner and showed promising clinical applicability in COPD., Key Points: • We developed a deep learning pulmonary vessel segmentation algorithm using virtual noncontrast images and 50-keV enhanced images produced by a dual-source CT scanner. • Our algorithm successfully segmented vessels on diseased lungs. • Our algorithm showed promising results in assessing the loss of small vessel density in COPD patients., (© 2021. European Society of Radiology.)

Background Determining the activity of pulmonary tuberculosis on chest radiographs is difficult. Purpose To develop a deep learning model to identify active pulmonary tuberculosis on chest radiographs. Materials and Methods Chest radiographs were retrospectively gathered from a multicenter consecutive cohort with pulmonary tuberculosis who were successfully treated between 2011 and 2017, along with normal radiographs to enrich a negative class. The pretreatment and posttreatment radiographs were labeled as positive and negative classes, respectively. A neural network was trained with those radiographs to calculate the probability of active versus healed tuberculosis. A single-center consecutive cohort (test set 1; 89 patients, 148 radiographs) and data from one multicenter randomized controlled trial (test set 2; 366 patients, 3774 radiographs) were used to test the model. The area under the receiver operating characteristic curve (AUC) was used to evaluate the performance of the model and of the four expert readers. Results In total, 6654 pre- and posttreatment radiographs from 3327 patients (mean age ± standard deviation, 55 years ± 19; 1884 men) with pulmonary tuberculosis and 3182 normal radiographs from as many patients (mean age, 53 years ± 14; 1629 men) were gathered. For test set 1, the model showed a higher AUC (0.83; 95% CI: 0.73, 0.89) than one pulmonologist (0.69; 95% CI: 0.61, 0.76; P < .001) and performed similarly to the other readers (AUC, 0.79-0.80; P = .14-.23). For 200 randomly selected radiographs from test set 2, the model had a higher AUC (0.84) than the pulmonologists (0.71 and 0.74; P < .001 and .01, respectively) and performed similarly to the radiologists (0.79 and 0.80; P = .08 and .06, respectively). The model output increased by 0.30 on average with a higher degree of smear positivity (95% CI: 0.20, 0.39; P < .001) and decreased during treatment (baseline, 3 months, and 6 months: 0.85, 0.51, and 0.26, respectively). Conclusion A deep learning model performed similarly to radiologists for accurately determining the activity of pulmonary tuberculosis on chest radiographs; it also was able to follow posttreatment changes. © RSNA, 2021 Online supplemental material is available for this article.

Chest X-rays (CXRs) can help triage for Coronavirus disease (COVID-19) patients in resource-constrained environments, and a computer-aided detection system (CAD) that can identify pneumonia on CXR may help the triage of patients in those environment where expert radiologists are not available. However, the performance of existing CAD for identifying COVID-19 and associated pneumonia on CXRs has been scarcely investigated. In this study, CXRs of patients with and without COVID-19 confirmed by reverse transcriptase polymerase chain reaction (RT-PCR) were retrospectively collected from four and one institution, respectively, and a commercialized, regulatory-approved CAD that can identify various abnormalities including pneumonia was used to analyze each CXR. Performance of the CAD was evaluated using area under the receiver operating characteristic curves (AUCs), with reference standards of the RT-PCR results and the presence of findings of pneumonia on chest CTs obtained within 24 hours from the CXR. For comparison, 5 thoracic radiologists and 5 non-radiologist physicians independently interpreted the CXRs. Afterward, they re-interpreted the CXRs with corresponding CAD results. The performance of CAD (AUCs, 0.714 and 0.790 against RT-PCR and chest CT, respectively hereinafter) were similar with those of thoracic radiologists (AUCs, 0.701 and 0.784), and higher than those of non-radiologist physicians (AUCs, 0.584 and 0.650). Non-radiologist physicians showed significantly improved performance when assisted with the CAD (AUCs, 0.584 to 0.664 and 0.650 to 0.738). In addition, inter-reader agreement among physicians was also improved in the CAD-assisted interpretation (Fleiss' kappa coefficient, 0.209 to 0.322). In conclusion, radiologist-level performance of the CAD in identifying COVID-19 and associated pneumonia on CXR and enhanced performance of non-radiologist physicians with the CAD assistance suggest that the CAD can support physicians in interpreting CXRs and helping image-based triage of COVID-19 patients in resource-constrained environment., Competing Interests: I have read the journal’s policy and the authors of this manuscript have the following competing interests: Chang Min Park holds stock of Promedius and stock options of Lunit Inc. and Coreline Soft. Eui Jin Hwang, Hyungjin Kim, and Chang Min Park received research grants from Lunit Inc, outside the present paper. We checked all authors’ competing interests and confirmed that our statement does not alter the adherence to PLOS ONE policy.

Objective: We aimed to develop a deep neural network for segmenting lung parenchyma with extensive pathological conditions on non-contrast chest computed tomography (CT) images., Materials and Methods: Thin-section non-contrast chest CT images from 203 patients (115 males, 88 females; age range, 31-89 years) between January 2017 and May 2017 were included in the study, of which 150 cases had extensive lung parenchymal disease involving more than 40% of the parenchymal area. Parenchymal diseases included interstitial lung disease (ILD), emphysema, nontuberculous mycobacterial lung disease, tuberculous destroyed lung, pneumonia, lung cancer, and other diseases. Five experienced radiologists manually drew the margin of the lungs, slice by slice, on CT images. The dataset used to develop the network consisted of 157 cases for training, 20 cases for development, and 26 cases for internal validation. Two-dimensional (2D) U-Net and three-dimensional (3D) U-Net models were used for the task. The network was trained to segment the lung parenchyma as a whole and segment the right and left lung separately. The University Hospitals of Geneva ILD dataset, which contained high-resolution CT images of ILD, was used for external validation., Results: The Dice similarity coefficients for internal validation were 99.6 ± 0.3% (2D U-Net whole lung model), 99.5 ± 0.3% (2D U-Net separate lung model), 99.4 ± 0.5% (3D U-Net whole lung model), and 99.4 ± 0.5% (3D U-Net separate lung model). The Dice similarity coefficients for the external validation dataset were 98.4 ± 1.0% (2D U-Net whole lung model) and 98.4 ± 1.0% (2D U-Net separate lung model). In 31 cases, where the extent of ILD was larger than 75% of the lung parenchymal area, the Dice similarity coefficients were 97.9 ± 1.3% (2D U-Net whole lung model) and 98.0 ± 1.2% (2D U-Net separate lung model)., Conclusion: The deep neural network achieved excellent performance in automatically delineating the boundaries of lung parenchyma with extensive pathological conditions on non-contrast chest CT images., Competing Interests: Sang Joon Park is the CEO of Medical IP., (Copyright © 2021 The Korean Society of Radiology.)

Objective: To describe the experience of implementing a deep learning-based computer-aided detection (CAD) system for the interpretation of chest X-ray radiographs (CXR) of suspected coronavirus disease (COVID-19) patients and investigate the diagnostic performance of CXR interpretation with CAD assistance., Materials and Methods: In this single-center retrospective study, initial CXR of patients with suspected or confirmed COVID-19 were investigated. A commercialized deep learning-based CAD system that can identify various abnormalities on CXR was implemented for the interpretation of CXR in daily practice. The diagnostic performance of radiologists with CAD assistance were evaluated based on two different reference standards: 1) real-time reverse transcriptase-polymerase chain reaction (rRT-PCR) results for COVID-19 and 2) pulmonary abnormality suggesting pneumonia on chest CT. The turnaround times (TATs) of radiology reports for CXR and rRT-PCR results were also evaluated., Results: Among 332 patients (male:female, 173:159; mean age, 57 years) with available rRT-PCR results, 16 patients (4.8%) were diagnosed with COVID-19. Using CXR, radiologists with CAD assistance identified rRT-PCR positive COVID-19 patients with sensitivity and specificity of 68.8% and 66.7%, respectively. Among 119 patients (male:female, 75:44; mean age, 69 years) with available chest CTs, radiologists assisted by CAD reported pneumonia on CXR with a sensitivity of 81.5% and a specificity of 72.3%. The TATs of CXR reports were significantly shorter than those of rRT-PCR results (median 51 vs. 507 minutes; p < 0.001)., Conclusion: Radiologists with CAD assistance could identify patients with rRT-PCR-positive COVID-19 or pneumonia on CXR with a reasonably acceptable performance. In patients suspected with COVID-19, CXR had much faster TATs than rRT-PCRs., Competing Interests: Eui Jin Hwang, Hyungjin Kim, and Chang Min Park report research grants from the Lunit Inc., outside the present study. Jin Mo Goo report research grant from the INFINITT Healthcare, outside the present study., (Copyright © 2020 The Korean Society of Radiology.)

Shared decision‐making is imperative for patient‐and family‐centered care. However, gathering individuals in a single place was challenged by modern life and pandemic restrictions. This study conducted a 1:1 randomized trial to examine the feasibility of a CT‐derived 3D virtual explanation module for lung cancer to improve the understanding of patients and third parties in physically separate locations. We prospectively enrolled adults in whom elective surgical resection for lung cancer was planned at a single tertiary hospital in 2020. From presurgical CT scans, deep neural networks automatically segmented lung cancer, airway, pulmonary lobes, skin, and bony thorax. The segmented structures were subsequently transformed into an anonymized interactive 3D module which comprised a standardized scenario with explanatory texts. The intervention group received a link to the module on their smartphone before admission and could repeatedly access the link or transfer it to patients' third parties. A total of 33 and 29 patients were enrolled in the intervention and control arms. The understanding score did not statistically differ between the arms (mean difference, 0.7 [95% CI: −0.2, 1.5]; p = 0.13). However, 76% of patients in the intervention arm accessed the link, and patient median access count was 14. The link recipients of third parties had comparable understanding scores to the patients (mean difference, −0.2 [95% CI: −1.9, 1.5]; p = 1.00), indicating that the understanding could be shared remotely with patients and patients' third parties. In conclusion, it was feasible that people physically separated from patients obtained a comparable understanding of lung cancer surgery using the patient's CT‐derived 3D virtual explanation module. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to stratify the early pneumonia trajectory on chest radiographs and compare patient characteristics in dyspneic patients with coronavirus disease 2019 (COVID-19). Materials and methods: We retrospectively included 139 COVID-19 patients with dyspnea (87 men, 62.7±16.3 years) and serial chest radiographs from January to September 2020. Radiographic pneumonia extent was quantified as a percentage using a previously-developed deep learning algorithm. A group-based trajectory model was used to categorize the pneumonia trajectory after symptom onset during hospitalization. Clinical findings, and outcomes were compared, and Cox regression was performed for survival analysis. Results: Radiographic pneumonia trajectories were categorized into four groups. Group 1 (n = 83, 59.7%) had negligible pneumonia, and group 2 (n = 29, 20.9%) had mild pneumonia. Group 3 (n = 13, 9.4%) and group 4 (n = 14, 10.1%) showed similar considerable pneumonia extents at baseline, but group 3 had decreasing pneumonia extent at 1–2 weeks, while group 4 had increasing pneumonia extent. Intensive care unit admission and mortality were significantly more frequent in groups 3 and 4 than in groups 1 and 2 (P <.05). Groups 3 and 4 shared similar clinical and laboratory findings, but thrombocytopenia (<150×103/μL) was exclusively observed in group 4 (P =.016). When compared to groups 1 and 2, group 4 (hazard ratio, 63.3; 95% confidence interval, 7.9–504.9) had a two-fold higher risk for mortality than group 3 (hazard ratio, 31.2; 95% confidence interval, 3.5–280.2), and this elevated risk was maintained after adjusting confounders. Conclusion: Monitoring the early radiologic trajectory beyond baseline further prognosticated at-risk COVID-19 patients, who potentially had thrombo-inflammatory responses. [ABSTRACT FROM AUTHOR]

Body composition analysis on CT images is a valuable tool for sarcopenia assessment. We aimed to develop and validate a deep neural network applicable to whole-body CT images of PET-CT scan for the automatic volumetric segmentation of body composition. For model development, one hundred whole-body or torso 18F-fluorodeoxyglucose PET–CT scans of 100 patients were retrospectively included. Two radiologists semi-automatically labeled the following seven body components in every CT image slice, providing a total of 46,967 image slices from the 100 scans for training the 3D U-Net (training, 39,268 slices; tuning, 3116 slices; internal validation, 4583 slices): skin, bone, muscle, abdominal visceral fat, subcutaneous fat, internal organs with vessels, and central nervous system. The segmentation accuracy was assessed using reference masks from three external datasets: two Korean centers (4668 and 4796 image slices from 20 CT scans, each) and a French public dataset (3763 image slices from 24 CT scans). The 3D U-Net-driven values were clinically validated using bioelectrical impedance analysis (BIA) and by assessing the model's diagnostic performance for sarcopenia in a community-based elderly cohort (n = 522). The 3D U-Net achieved accurate body composition segmentation with an average dice similarity coefficient of 96.5%–98.9% for all masks and 92.3%–99.3% for muscle, abdominal visceral fat, and subcutaneous fat in the validation datasets. The 3D U-Net-derived torso volume of skeletal muscle and fat tissue and the average area of those tissues in the waist were correlated with BIA-derived appendicular lean mass (correlation coefficients: 0.71 and 0.72, each) and fat mass (correlation coefficients: 0.95 and 0.93, each). The 3D U-Net-derived average areas of skeletal muscle and fat tissue in the waist were independently associated with sarcopenia (P <.001, each) with adjustment for age and sex, providing an area under the curve of 0.858 (95% CI, 0.815 to 0.901). This deep neural network model enabled the automatic volumetric segmentation of body composition on whole-body CT images, potentially expanding adjunctive sarcopenia assessment on PET-CT scan and volumetric assessment of metabolism in whole-body muscle and fat tissues. [ABSTRACT FROM AUTHOR]