Search

The Deformable Mirror Demonstration Mission (DeMi) is a 6U CubeSat that will operate and characterize the on-orbit performance of a Microelectromechanical Systems (MEMS) deformable mirror (DM) with both an image plane and a Shack-Hartmann wavefront sensor (SHWFS). Coronagraphs on future space telescopes will require precise wavefront control to detect and characterize Earth-like exoplanets. High-actuator count MEMS deformable mirrors can provide wavefront control with low size, weight, and power. The DeMi payload will characterize the on-orbit performance of a 140 actuator MEMS DM with 5.5 _m maximum stroke, with a goal of measuring individual actuator wavefront displacement contributions to a precision of 12 nm. The payload will be able to measure low order aberrations to l/10 accuracy and l/50 precision, and will correct static and dynamic wavefront phase errors to less than 100 nm RMS. The DeMi team developed miniaturized DM driver boards to fit within the CubeSat form factor, and two cross-strapped Raspberry Pi 3 boards are used as payload computers. We present an overview of the payload design, the assembly, integration and test progress, and the miniaturized DM driver characterization process. Launch is planned for late 2019.

A NASA sounding rocket for high contrast imaging with a visible nulling coronagraph, the Planet Imaging Coronagraphic Technology Using a Reconfigurable Experimental Base (PICTURE-B) payload has made two suborbital attempts to observe the warm dust disk inferred around Epsilon Eridani. We present results from the November 2015 launch demonstrating active wavefront sensing in space with a piezoelectric mirror stage and a micromachine deformable mirror along with precision pointing and lightweight optics in space., Presented at SPIE Astronomical Telescopes + Instrumentation

The PICTURE-C mission will fly a 60 cm off-axis unobscured telescope and two high-contrast coronagraphs in successive high-altitude balloon flights with the goal of directly imaging and spectrally characterizing visible scattered light from exozodiacal dust in the interior 1-10 AU of nearby exoplanetary systems. The first flight in 2017 will use a 10^(-4) visible nulling coronagraph (previously flown on the PICTURE sounding rocket) and the second flight in 2019 will use a 10^(-7) vector vortex coronagraph. A low-order wavefront corrector (LOWC) will be used in both flights to remove time-varying aberrations from the coronagraph wavefront. The LOWC actuator is a 76-channel high-stroke deformable mirror packaged on top of a tip-tilt stage. This paper will detail the selection of a complementary high-speed, low-order wavefront sensor (LOWFS) for the mission. The relative performance and feasibility of several LOWFS designs will be compared including the Shack-Hartmann, Lyot LOWFS, and the curvature sensor. To test the different sensors, a model of the time-varying wavefront is constructed using measured pointing data and inertial dynamics models to simulate optical alignment perturbations and surface deformation in the balloon environment.