Search

A distributed control policy is designed for a group of Euler–Lagrange (EL) agents in a leader–follower-based communication network with time-varying delays. The nonsingular terminal sliding mode control (NTSMC) policy is integrated with mixed-type feedback and time-varying, adaptive control parameters. The control gain and proportions of feedback with and without estimated self-delays are tuned online with fuzzy logic control (FLC). The total and maximum tracking errors of a group of EL agents are assessed to demonstrate an improvement in synchronization performance with the proposed NTSMC+FLC approach compared to the NTSMC approach with constant parameters. Simulation and experimental results of a group of Phantom Omni manipulators are presented to validate the proposed control policy. [ABSTRACT FROM AUTHOR]

This article studies the problem of dissipativity-based asynchronous state estimation for a class of discrete-time Markov jump neural networks subject to randomly occurring nonlinearities, sensor saturations, and stochastic parameter uncertainties. First, two stochastic nonlinearities occurring in the system are described by statistical means and obey two Bernoulli processes independently. Then, the hidden Markov model is used to characterize the real communication environment closely between the designed estimator and the system model due to the networked-induced phenomenons that also lead to randomly occurring parametric uncertainties of the estimator considered modeled by two Bernoulli processes. A new criterion is established to guarantee that the resulting error system is stochastically stable with predefined dissipativity performance. Finally, we provide a simulation example to validate the theoretical analysis. [ABSTRACT FROM AUTHOR]

Common assumptions in most of the previous nonlinear networked leader–follower systems are that the leader is provided as a constant signal and that the controllers are designed for either the joint-space regulation or the translational Cartesian-space motion control. This article addresses the control issue of the delay-induced horizontal shift effect when the leader is moving with a changing speed. A novel mixed-type feedback is introduced to reduce the horizontal shift effect so as to minimize tracking errors experienced by the follower agents. In this article, we also study the complete pose control using a nonsingular terminal sliding mode (NTSM) method. A stability analysis is provided to prove the finite-time boundedness of the tracking error signals. Quantitative evaluations of the multiple effects on the error bound are conducted to facilitate the subsequent control design to improve the performance. Numerical simulation results of a team of two degree-of-freedoms (DOFs) manipulators demonstrate the improved tracking performance of the end effectors with small bounded errors which are affected by network delays, maximum assigned accelerations, and the selection of control gains. The experimental results are provided to demonstrate the performance of the developed controller. [ABSTRACT FROM AUTHOR]

In this article, we focus on the experimental validation of the developed adaptive nonsingular terminal sliding mode (ANTSM) controller for a networked manipulator system. The proposed control approach is designed to deal with a combination of adverse and inexactly known conditions in practice, including parametric uncertainties, frictions, exogenous disturbances, and random time-varying network delays. Another issue addressed in this article is the tradeoff between achieving a smooth convergence and a high tracking accuracy in the physical implementation of the ANTSM controller. Hence, a novel time-varying gain in a form of logistic function is introduced to provide converging smoothness and meanwhile improve the tracking accuracy. Experimental results and empirical analysis are provided to demonstrate the effectiveness and performance improvement of the proposed controller with a time-varying gain. [ABSTRACT FROM AUTHOR]

In this article, the dissipativity-based filtering of the Markovian jump neural networks subject to incomplete measurements and deception attacks is investigated by adopting an event-triggered communication strategy, where the attackers are supposed to occur in a random fashion but obey the Bernoulli distribution. Consider that the information of the system mode is transmitted to the filter over the communication network that is vulnerable to external attacks, which may lead to the undesired performance of the resulting system by injecting malicious information from the attackers. As a result, the filter has difficulty completing information from the original system. Besides, an event-triggered communication mechanism is introduced to reduce the communication frequency between data transmission due to the limited network resources, and different triggering conditions corresponding to different jump modes are developed. Then, based on the above considerations, the sufficient condition is derived to ensure the stochastic stability and dissipativity of the resulting augmented system although the deception attacks and incomplete information exist. A numerical simulated example is provided to verify the theoretical analysis. [ABSTRACT FROM AUTHOR]

In this article, an adaptive nonsingular terminal sliding-mode (ANTSM) method is proposed for the motion tracking control of a bilateral teleoperation system. Efforts in this article seek to improve the position tracking performance of nonlinear systems subject to time-varying network delays, parametric uncertainties, and unknown external disturbances and frictions. Another issue addressed in this article is the common delay-induced phase shift of tracking profiles in many control methods, which is greatly reduced by introducing a novel mixed type of feedback signals in the ANTSM control design. Furthermore, the proposed adaptive control design with two online-estimated compensatory bounds removes the requirement of exact knowledge of network delays and disturbance bounds as a prior. In the master side, a force predictor is used to estimate the current environmental force for the reference signal generator. Therefore, the direct transmission of force signals is avoided. By comparing with the existing model-based and model-free methods, numerical simulation results with six-degree-of-freedom manipulators illustrate the merits of the developed robust and adaptive controllers. Experimental results with two Phantom Omni devices are also provided to demonstrate the effectiveness and the significant performance improvements of the proposed controllers. [ABSTRACT FROM AUTHOR]

Bilateral teleoperation technology has caused wide attentions because of its applications in various remote operation systems. However, there exist some challenging control issues such as communication delay, unmeasurable environmental force, and various manipulator modelling uncertainties. In this study, the disturbance observer is designed based on the slave manipulator dynamics to observe the unmeasurable environmental force. When the environmental force is modelled as a general linear regression form, its unknown parameters can be estimated online by the least square adaptation law. A novel communication structure is proposed where only the master trajectory is transmitted to the slave side, and the transmission signal from the slave to the master is replaced by those estimated environmental parameters. Since these parameters are not power signals, the passivity problem of the communication channel and the trade‐off limitation between the transparency performance and robust stability in traditional teleoperation control are essentially avoided. The sliding mode control and the force compensation of disturbance observer are integrated subsequently to deal with various manipulator modelling uncertainties, so that the excellent synchronisation performance can be realised. Thus, the proposed control algorithm can guarantee the robust stability and the good control performance simultaneously under arbitrary time delays. The simulation and experiment on two single degree‐of‐freedom manipulators are carried out and the results show the effectiveness of the proposed control algorithm. [ABSTRACT FROM AUTHOR]