Search

Iron-based particles loaded on porous carbon materials have attracted extensive attention as catalysts for denitration and desulfurization reactions. However, the carbon support of a high-temperature denitration catalyst is inevitably oxidized in the presence of H2O and O2. The mechanism of denitration catalyst oxidation and its influence on the catalytic reaction remain to be further explored. Fe2O3-loaded graphene models with carbon vacancy (Gdef), hydroxyl (HyG), and carboxyl (CyG) were constructed to investigate the effects of hydroxylation and carboxylation on the catalytic activity of Fe2O3/graphene for oxidative desulfurization and denitration by using density functional theory (DFT) calculations. According to the analysis of structural properties and adsorption energy, the adsorption process of Fe2O3 on HyG and CyG was observed to have proceeded more favorably than that on Gdef. The density-of-states (DOS) results also affirmed that HyG and CyG promote the electron delocalization of Fe2O3 around the Fermi level, enhancing the chemical activity of Fe2O3. Moreover, adsorption energy analysis indicates that hydroxylation and carboxylation enhanced the adsorption of SO2 and H2O2 on Fe2O3/graphene while also maintaining preferable adsorption stability of NO. Furthermore, mechanistic research explains that adsorbed H2O2 on HyG and CyG directly oxidizes NO and SO2 into HNO2 and H2SO4 following a one-step reaction. The results provide a fundamental understanding of the oxidized catalyst on catalytic denitration and desulfurization reactions. [ABSTRACT FROM AUTHOR]

We propose an ab initio formulation that enables a rigorous calculation of the first-order nonadiabatic couplings (NAC) between electronic states based on time-dependent density functional theory in conjunction with planewave bases, projector augmented-wave pseudopotentials, and hybrid exchange-correlation functionals. The linear and quadratic time-dependent response theory is used to derive analytic expressions for the NAC matrix elements. In contrast to the previous formulation in atomic basis sets, the present formulation eliminates explicit references to Kohn-Sham virtual orbitals. With the introduction of Lagrangian functionals, the present formulation circumvents expensive derivative calculations of Kohn-Sham orbitals with respect to ionic coordinates. As a validation of the formulation, the NAC matrix elements of small molecules LiH and HeH+ are calculated and compared to previous results with the atomic orbital basis. This development paves the way for accurate ab initio nonadiabatic molecular dynamics in extended systems. [ABSTRACT FROM AUTHOR]

Carbamazepine (CBZ) is a widely used anticonvulsant drug that has been detected in aquatic environments. This study investigated the toxicity of its by-products (CBZ-BPs), which may surpass CBZ. Unlike the previous studies, this study offered a more systematic approach to identifying toxic BPs and inferring degradation pathways. Furthermore, quadrupole time-of-flight (QTOF) and density functional theory (DFT) calculations were employed to analyze CBZ-BP structures and degradation pathways. Evaluation of total organic carbon (TOC) and total nitrogen (TN) mineralization rates, revealed carbon (C) greater susceptibility to mineralization compared with nitrogen (N). Furthermore, three rules were established for CBZ decarbonization and N removal during degradation, observing the transformation of aromatic compounds into aliphatic hydrocarbons and stable N-containing organic matter over time. Five potentially highly toxic BPs were screened from 14 identified BPs, with toxicity predictions guiding the selection of commercial standards for quantification and true toxicity testing. Additionally, BP207 emerged as the most toxic, supported by the predictive toxicity accumulation model (PTAM). Notably, highly toxic BPs feature an acridine structure, indicating its significant contribution to toxicity. These findings offered valuable insights into the degradation mechanisms of emerging contaminants and the biosafety of aquatic environments during deep oxidation. [Display omitted] • The rules of CBZ decarbonization and nitrogen removal during UV/H 2 O 2 were deduced. • Key by-products were quantified on concentration and toxicity. • Acridine structure was the main toxic contributor. • Carbon was more likely to be mineralized than nitrogen during degradation. • The degradation pathways were obtained by combing N-transformation and DFT. [ABSTRACT FROM AUTHOR]

We investigate the structures of hydrated electrons (e−aq) in one of water's solid phases, namely, clathrate hydrates (CHs). Using density functional theory (DFT) calculations, DFT-based ab initio molecular dynamics (AIMD), and path-integral AIMD simulations with periodic boundary conditions, we find that the structure of the e−aq@node model is in good agreement with the experiment, suggesting that an e−aq could form a node in CHs. The node is a H2O defect in CHs that is supposed to be composed of four unsaturated hydrogen bonds. Since CHs are porous crystals that possess cavities that can accommodate small guest molecules, we expect that these guest molecules can be used to tailor the electronic structure of the e−aq@node, and it leads to experimentally observed optical absorption spectra of CHs. Our findings have a general interest and extend the knowledge of e−aq into porous aqueous systems. [ABSTRACT FROM AUTHOR]

Developing efficient and anti‐corrosive oxygen reduction reaction (ORR) catalysts is of great importance for the applications of proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel approach to prepare metal oxides supported intermetallic Pt alloy nanoparticles (NPs) via the reactive metal‐support interaction (RMSI) as ORR catalysts, using Ni‐doped cubic ZrO2 (Ni/ZrO2) supported L10−PtNi NPs as a proof of concept. Benefiting from the Ni migration during RMSI, the oxygen vacancy concentrations in the support are increased, leading to an electron enrichment of Pt. The optimal L10−PtNi−Ni/ZrO2−RMSI catalyst achieves remarkably low mass activity (MA) loss (17.8 %) after 400,000 accelerated durability test cycles in a half‐cell and exceptional PEMFC performance (MA=0.76 A mgPt−1 at 0.9 V, peak power density=1.52/0.92 W cm−2 in H2−O2/−air, and 18.4 % MA decay after 30,000 cycles), representing the best reported Pt‐based ORR catalysts without carbon supports. Density functional theory (DFT) calculations reveal that L10−PtNi−Ni/ZrO2−RMSI requires a lower energetic barrier for ORR than L10−PtNi−Ni/ZrO2 (direct loading), which is ascribed to a decreased Bader charge transfer between Pt and *OH, and the improved stability of L10−PtNi−Ni/ZrO2−RMSI compared to L10−PtNi−C can be contributed to the increased adhesion energy and Ni vacancy formation energy within the PtNi alloy. [ABSTRACT FROM AUTHOR]

Developing efficient and anti‐corrosive oxygen reduction reaction (ORR) catalysts is of great importance for the applications of proton exchange membrane fuel cells (PEMFCs). Herein, we report a novel approach to prepare metal oxides supported intermetallic Pt alloy nanoparticles (NPs) via the reactive metal‐support interaction (RMSI) as ORR catalysts, using Ni‐doped cubic ZrO2 (Ni/ZrO2) supported L10−PtNi NPs as a proof of concept. Benefiting from the Ni migration during RMSI, the oxygen vacancy concentrations in the support are increased, leading to an electron enrichment of Pt. The optimal L10−PtNi−Ni/ZrO2−RMSI catalyst achieves remarkably low mass activity (MA) loss (17.8 %) after 400,000 accelerated durability test cycles in a half‐cell and exceptional PEMFC performance (MA=0.76 A mgPt−1 at 0.9 V, peak power density=1.52/0.92 W cm−2 in H2−O2/−air, and 18.4 % MA decay after 30,000 cycles), representing the best reported Pt‐based ORR catalysts without carbon supports. Density functional theory (DFT) calculations reveal that L10−PtNi−Ni/ZrO2−RMSI requires a lower energetic barrier for ORR than L10−PtNi−Ni/ZrO2 (direct loading), which is ascribed to a decreased Bader charge transfer between Pt and *OH, and the improved stability of L10−PtNi−Ni/ZrO2−RMSI compared to L10−PtNi−C can be contributed to the increased adhesion energy and Ni vacancy formation energy within the PtNi alloy. [ABSTRACT FROM AUTHOR]

Remdesivir (RDV), dexamethasone (DEX) and hydroxychloroquine (HCQ) were widely used in the treatment of COVID-19 pneumonia, possibly causing environmental risks and drug-resistance viruses. This study elucidated the degradation mechanisms and potential toxicity risks of the three anti-COVID-19 drugs by UV and ultraviolet-coupled advanced oxidation processes (UV/AOPs). All the drugs could be degraded by more than 98% within 3 min under the following optimal conditions: pH of 5.0 and drug-to-oxidant (H 2 O 2) molar ratio of 1:200. Combined with density functional theory (DFT) analysis and high-performance liquid chromatography quadrupole time-of-flight mass spectrometry (HPLC-QTOF-MS), twenty-four transformation products (TPs) were detected and the main degradation pathways were investigated. Based on bacterial luminescence inhibition test and the peak-area evolution of TPs, RDV and HCQ showed an obvious toxicity-increase region when TPs were generated in large quantities, while the toxicity of DEX continued to decline during degradation processes. By QSAR predictions, the main contributors to the toxicity evolution during the UV/AOPs were predicted. Halogen-containing TPs showed significantly higher toxicity than other TPs, and thus the chlorine-containing structure in HCQ presented the potential toxicity. Appropriate reaction parameters and adequate reaction time for the UV/AOPs could eliminate the toxicity of TPs and ensure environmental safety. This study could play a positive role in the treatment of anti-COVID-19 drugs and their environmental hazard assessment. [Display omitted] • Decomposition kinetics and optimal reaction conditions during UV/AOPs for anti-COVID-19 drugs. • 24 TPs and degradation pathways were proposed by DFT and QTOF. • Toxicity data of RDV in QSAR was supplemented by luminescent bacterial test. • Combined QSAR prediction, luminescent bacterial tests and TPs peak area evolution to analyze TPs' toxicity. • Halogen groups contributed to the TPs' toxicity of HCQ. [ABSTRACT FROM AUTHOR]

A palladium‐catalyzed chemoselective coupling of readily available bicyclo[1.1.1]pentanyl alcohols (BCP−OH) with various halides is reported, which offers expedient approaches to a wide range of cyclobutanone and β,γ‐enone skeletons via single or double C−C activation. The chemistry shows a broad substrate scope in terms of both the range of BCP−OH and halides including a series of natural product derivatives. Moreover, dependency of reaction chemodivergence on base additive has been investigated through experimental and density functional theory (DFT) studies, which is expected to significantly enrich the reaction modes and increase the synthetic potential of BCP−OH in preparing more complex molecules. [ABSTRACT FROM AUTHOR]

A palladium‐catalyzed chemoselective coupling of readily available bicyclo[1.1.1]pentanyl alcohols (BCP−OH) with various halides is reported, which offers expedient approaches to a wide range of cyclobutanone and β,γ‐enone skeletons via single or double C−C activation. The chemistry shows a broad substrate scope in terms of both the range of BCP−OH and halides including a series of natural product derivatives. Moreover, dependency of reaction chemodivergence on base additive has been investigated through experimental and density functional theory (DFT) studies, which is expected to significantly enrich the reaction modes and increase the synthetic potential of BCP−OH in preparing more complex molecules. [ABSTRACT FROM AUTHOR]

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d‐band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water‐splitting electrocatalysis. [ABSTRACT FROM AUTHOR]

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d‐band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water‐splitting electrocatalysis. [ABSTRACT FROM AUTHOR]

Alkaline hydrogen evolution reaction (HER), consisting of Volmer and Heyrovsky/Tafel steps, requires extra energy for water dissociation, leading to more sluggish kinetics than acidic HER. Despite the advances in electrocatalysts, how to combine active sites to synergistically promote both steps and understand the underlying mechanism remain largely unexplored. Here, Density Functional Theory (DFT) calculations predict that NiO accelerates the Volmer step while metallic Ni facilitates the Heyrovsky/Tafel step. A facile strategy is thus developed to control Ni/NiO heterosurfaces in uniform and well-dispersed Ni-based nanocrystals, targeting both reaction steps synergistically. By systematically modulating the surface composition, we find that steering the elementary steps through tuning the Ni/NiO ratio can significantly enhance alkaline HER activity, and Ni/NiO nanocrystals with a Ni/NiO ratio of 23.7% deliver the best activity, outperforming other state-of-the-art analogues. The results suggest that integrating bicomponent active sites for elementary steps is effective for promoting alkaline HER, but they have to be balanced. [ABSTRACT FROM AUTHOR]

This study aimed to achieve toxicity control of sulfadiazine (SDZ) and pirimiphos-methyl (PMM) via the UV/H 2 O 2 process by optimizing the reaction parameters. The results show that both drugs had a good degradation effect under the following parameters: a H 2 O 2 molar ratio of 1:200, and neutral conditions. SDZ and PMM could be degraded by more than 99% within 3 min, respectively. In the Daphnia magna acute toxicity assay and Vibrio fischeri inhibition assay, both SDZ and PMM exhibited a phenomenon of increasing toxicity. Additionally, through the use of density functional theory (DFT) calculation and HPLC-QTOF-MS, 21 transformation products (TPs) were identified, and the principal degradation pathways were proposed. The toxicity of the TPs was determined by comparing the QSAR prediction results with toxicity test data. As a result, under the higher UV light intensity (2300 μW/cm2) and neutral conditions, SDZ showed highest toxicity, whereas PMM showed lowest toxicity under the lowest UV light intensity (450 μW/cm2) and neutral conditions. Four main toxic TPs were identified, and their yields could be reduced by adjusting the reaction parameters. Therefore, the selection of appropriate reaction parameters could reduce the production of toxic TPs and ensure the safety of water environment. [Display omitted] • Toxicity of SDZ and PMM was assessed by Daphnia magna and Vibrio fischeri. • 21 TPs and degradation pathways were proposed by DFT and QTOF. • Nitrogenous groups were potential contributors to the TPs' toxicity in SDZ and PMM. • Eliminating 4 toxicity-causing TPs was verified to be effective for toxicity control. [ABSTRACT FROM AUTHOR]

The serious durability concerns of carbon supported Pt electrocatalysts for oxygen reduction reaction (ORR) have strictly limited the commercialization of fuel cells. Herein, cable-like carbon nanotubes (CNTs)@SnO 2 core@shell supports with regulable electronic metal-support interaction (EMSI) are designed for Pt nanoparticles (NPs) as ORR catalysts. Impressively, the best-performing Pt-CNT@SnO 2 catalyst with optimized d- band center achieves an excellent activity (mass activity (MA) of 0.68 A mg Pt −1 at 0.9 V iR-free and peak power density of 1618 mW cm−2) and record-high durability in H 2 -O 2 fuel cells (9.2 % MA and 8 % power density loss after 5k cycles under 1.0–1.5 V) among the reported Pt-based catalysts, which is also superior to the U.S. DOE 2025 targets. Density functional theory (DFT) calculations reveal that the strong metal-support bonding interaction (SMSBI) endows much larger adhesion energy and migration barrier towards Pt atoms compared to carbon supports, leading to the extraordinarily high stability in fuel cells. [Display omitted] • The Pt-CNT@SnO 2 catalyst demonstrates the best stability among reported Pt-based ORR catalysts under high potential regions. • Strong metal-support bonding interaction (SMSBI) between Pt and SnO 2 is able to stabilize Pt NPs against migration/agglomeration. • The d -band center of Pt is optimized by regulating the electronic metal-support interaction (EMSI). [ABSTRACT FROM AUTHOR]

The development of superior non-platinum electrocatalysts for enhancing the electrocatalytic activity and stability for the oxygen-reduction reaction (ORR) and liquid fuel oxidation reaction is very important for the commercialization of fuel cells, but still a great challenge. Herein, we demonstrate a new colloidal chemistry technique for making structurally ordered PdCu-based nanoparticles (NPs) with composition control from PdCu to PdCuNi and PtCuCo. Under the dual tuning on the composition and intermetallic phase, the ordered PdCuCo NPs exhibit better activity and much enhanced stability for ORR and ethanol-oxidation reaction (EOR) than those of disordered PdCuM NPs, the commercial Pt/C and Pd/C catalysts. The density functional theory (DFT) calculations reveal that the improved ORR activity on the PdCuM NPs stems from the catalytically active hollow sites arising from the ligand effect and the compressive strain on the Pd surface owing to the smaller atomic size of Cu, Co, and Ni. [ABSTRACT FROM AUTHOR]

First-principles density functional theory is used to explore the possibility of tuning effective work function of high dielectric/metal gate stacks. Using HfO [ABSTRACT FROM AUTHOR]

The effect of high-pressure on the electronic and magnetic properties in perovskite oxide NiCrO3 is explored by using density-functional calculations. The results show that NiCrO3 exhibits antiferromagnetic semiconductor when the external hydrostatic pressure is below ~80GPa, and then behaves as antiferromagnetic half-metal on increasing the pressure. The band gaps in the spin-up and spin-down channels decrease from 3.9 to 2.5eV and 0.35 to 0eV, respectively. The magnetic moments of Ni, Cr, and O ions are slightly changed in the whole range of the pressure, and the electronic configurations of both Ni and Cr ions are in the high-spin state. Based on the mean-field theory, the estimated Néel temperature of semiconducting NiCrO3 increases from 270K and reaches the maximum of 321K around 60GPa with increasing the pressure, and the Néel temperature of the half-metallic one is of about 309K. [ABSTRACT FROM AUTHOR]

[Display omitted] • Bi-Pd single atom alloy (SAA) nanodendrites (NDs) with Bi atomically dispersed in Pd matrices have been synthesized. • The FEs of CO on Bi 6 Pd 94 -SAA NDs catalyst reach 90.5 % and 91.8 % in H-type and gas diffusion flow cells, respectively. • The Pd mass normalized current densities of CO are 173.7 mA/cm2 and 111.4 A/g Pd at only -0.48 vs. RHE in a gas diffusion flow cell. • DFT calculation indicate that single Bi atom doping decreases H affinity and increases the reaction barrier for H 2 evolution on Pd. • Bi doping also decreases the free energy for *COOH generation which is a key intermediate for CO production. Pd is a catalyst for electrochemical CO 2 reduction to CO but often disturbed by H 2 and formate formation at low overpotentials due to its strong affinity to H atoms. Herein, guided by density functional theory (DFT) calculations, Bi-Pd single atom alloy (SAA) nanodendrites (NDs) with Bi atomically dispersed in Pd matrices have been developed for efficient CO 2 reduction to CO. The Faradic efficiencies (FEs) of CO on the Bi 6 Pd 94 -SAA ND catalyst reach 90.5 % and 91.8 % in H-type and gas diffusion flow cells with overpotentials of only 290 and 200 mV, respectively, which are among the best of the reported Pd-based electrocatalysts. The greatly enhanced CO formation on the Bi 6 Pd 94 -SAA NDs can be attributed to the increased reaction barriers for H 2 formation due to a lower H coverage resulted from Bi doping, and the decreased free energy for *COOH generation which is a key intermediate for CO production. [ABSTRACT FROM AUTHOR]

The wide use and distribution of sulpiride (SP) has caused potential threats to the water environment and human health. In this study, ultrathin S-doped graphitic carbon nitride nanosheets (US–CN) was successfully synthesized and characterized, and its SP removal efficiency was evaluated under various conditions via the visible-light-assisted peroxydisulfate (PDS) activation method. The degradation pathways and mechanism were also discussed through quenching experiments, density functional theory (DFT) calculations, and intermediate products detection. After sulfur doping and ultrasonic treatment, graphitic carbon nitride (CN) possessed an ultra-thin and porous structure, which facilitated the electronic distribution and more photocurrent, thus resulting in the excellent stability and removal efficiency for SP via PDS activation upon visible light irradiation. The singlet oxygen (1O 2) generated by the US-CN/PDS/VL system played a significant role in SP degradation. Based on the bonds of electron-rich atoms fracturing and the SO 2 extrusion, the SP degradation pathway was proposed. This work provides a useful information for the SP photocatalytic degradation via PDS activation. Image 1 • US-CN was synthesized for efficient PDS activation. • The singlet oxygen (1O 2) played a major role in the SP degradation. • Bonds of electron-rich sites atoms (9 N, 12 N, 17O) of SP were fractured. • SO 2 extrusion products were generated from the process of SP degradation. • SP degradation pathway during US-CN/PDS/VL system was proposed. [ABSTRACT FROM AUTHOR]

• Immobilizing perovskite CsPbBr3 nanocrystals on black phosphorus sheets is obtained. • CsPbBr3/BP acts as a new and effective photocatalyst for CO2 photoreduction. • Introduced BP trapps the electrons from CsPbBr3 for boosting charge separation. • Introduced BP in CsPbBr 3 generates more active sites to CO 2 activation and reduction. Direct conversion CO 2 to useful chemical fuels by photocatalysis has been considered to be a promising strategy for renewable energy production. The realization of this goal relies mainly on the development of photocatalysts with ideal charge separation efficiency. Here, we use all-inorganic perovskite nanocrystals (CsPbBr 3) immobilized on two-dimensional (2D) black phosphorus nanosheets (BP), resulting in a new and effective CsPbBr 3 /BP photocatalyst for CO 2 photoreduction. Compare to pristine CsPbBr 3 , the introduction of BP generates more active sites for facilitating CO 2 activation and trapped the excited electrons from CsPbBr 3 with high charge separation efficiency. Time-resolved photoluminescence and transient absorption measurements together with density functional theory calculations provide a clear elucidation of the charge separation pathways that contribute to the enhanced CO 2 conversion rate. This significant feature provides a new venue for constructing all-inorganic perovskite-based photocatalyst by combining with BP for solar energy conversion and artificial photosynthesis. [ABSTRACT FROM AUTHOR]

Engineering the crystal structure of Pt–M (M = transition metal) nanoalloys to chemically ordered ones has drawn increasing attention in oxygen reduction reaction (ORR) electrocatalysis due to their high resistance against M etching in acid. Although Pt–Ni alloy nanoparticles (NPs) have demonstrated respectable initial ORR activity in acid, their stability remains a big challenge due to the fast etching of Ni. In this work, sub‐6 nm monodisperse chemically ordered L10‐Pt–Ni–Co NPs are synthesized for the first time by employing a bifunctional core/shell Pt/NiCoOx precursor, which could provide abundant O‐vacancies for facilitated Pt/Ni/Co atom diffusion and prevent NP sintering during thermal annealing. Further, Co doping is found to remarkably enhance the ferromagnetism (room temperature coercivity reaching 2.1 kOe) and the consequent chemical ordering of L10‐Pt–Ni NPs. As a result, the best‐performing carbon supported L10‐PtNi0.8Co0.2 catalyst reveals a half‐wave potential (E1/2) of 0.951 V versus reversible hydrogen electrode in 0.1 m HClO4 with 23‐times enhancement in mass activity over the commercial Pt/C catalyst along with much improved stability. Density functional theory (DFT) calculations suggest that the L10‐PtNi0.8Co0.2 core could tune the surface strain of the Pt shell toward optimized Pt–O binding energy and facilitated reaction rate, thereby improving the ORR electrocatalysis. [ABSTRACT FROM AUTHOR]