Search

Highlights: The chemical process of local oxidation–partial reduction–deep coupling for stibnite reduction of carbon dots (CDs) is revealed by in-situ high-temperature X-ray diffraction. Sb2S3@xCDs anode delivers high initial coulombic efficiency in lithium ion batteries (85.2%) and sodium ion batteries (82.9%), respectively. C–S bond influenced by oxygen-rich carbon matrix can restrain the conversion of sulfur to sulfite, well confirmed by X-ray photoelectron spectroscopy characterization of solid electrolyte interphase layers helped with density functional theory calculations. CDs-induced Sb–O–C bond is proved to effectively regulate the interfacial electronic structure. The application of Sb2S3 with marvelous theoretical capacity for alkali metal-ion batteries is seriously limited by its poor electrical conductivity and low initial coulombic efficiency (ICE). In this work, natural stibnite modified by carbon dots (Sb2S3@xCDs) is elaborately designed with high ICE. Greatly, chemical processes of local oxidation–partial reduction–deep coupling for stibnite reduction of CDs are clearly demonstrated, confirmed with in situ high-temperature X-ray diffraction. More impressively, the ICE for lithium-ion batteries (LIBs) is enhanced to 85%, through the effect of oxygen-rich carbon matrix on C–S bonds which inhibit the conversion of sulfur to sulfite, well supported by X-ray photoelectron spectroscopy characterization of solid electrolyte interphase layers helped with density functional theory calculations. Not than less, it is found that Sb–O–C bonds existed in the interface effectively promote the electronic conductivity and expedite ion transmission by reducing the bandgap and restraining the slip of the dislocation. As a result, the optimal sample delivers a tremendous reversible capacity of 660 mAh g−1 in LIBs at a high current rate of 5 A g−1. This work provides a new methodology for enhancing the electrochemical energy storage performance of metal sulfides, especially for improving the ICE. [ABSTRACT FROM AUTHOR]

Antimony (Sb) is considered a promising anode material for sodium‐ion batteries due to its high specific capacity and moderate working potential. However, the non‐negligible volume variation leads to the rapid decay of capacity, which hinders the practical application of Sb anode materials. Here, an economical and scalable route with high yield is proposed to obtain Sb ultrafine nanocrystals embedded in a porous carbon skeleton. Notably, the synergetic effect of the heterogeneous structure is maximized by inducing the interfacial coupling SbOC and creating buffering space for the volume effect of Sb. The high‐entropy phase interface creates the doping site breaking the periodicity of atoms and alters the electronic structure, also bridging the slip of intergranular defects. Thus, the electronic conductivity and phase interface structural stability are reinforced. The mechanism of accelerating electron migration at the heterogeneous phase interface is visualized through the density functional theory method, and the mass/charge‐transfer kinetics is analyzed via the calculation of surface‐induced capacitive contribution. [ABSTRACT FROM AUTHOR]

Antimony-based materials represent promising anode materials for sodium ion batteries (SIBs) owing to their high theoretical capacity, however, the large volume expansion and low ionic conductivity during the electrochemical process prohibit them from reaching their theoretical expectations. In this work, Sb 2 S 3 @C and Sb 2 Se 3 @C nanodots with uniform diameters of 19.0 nm and 20.7 nm were synthesized by H 2 /C thermal reduction and co-sulfurization (selenization) of sodium stibogluconate. Each Sb 2 S 3 and Sb 2 Se 3 nanodot was coated by an interconnecting carbon network with weak graphitization, which further crosslinked together to form a high conductive framework. When applied as anode for SIBs, they exhibited desired sodium storage properties, especially the excellent cycling stability of Sb 2 Se 3 @C nanodots with a reversible capacity of 316.1 mA h g−1 after 100 cycles at 100 mA g−1 and 269.1 mA h g−1 after 200 cycles at 1 A g−1, which was consistent with the calculated result of theoretical volume changes (264% and 246%) and density functional theory (DFT) calculation for both materials during the Na+ intercalation processes, as expected. [Display omitted] • Sb 2 S 3 (Sb 2 S 3) nanodots/C composites have been successfully fabricated. • The volume changes of two materials during the Na+ insertion/deintercalation process have been calculated and analyzed in details. • The satisfactory sodium storage properties are achieved, which is consistent with the result of theoretical calculation. [ABSTRACT FROM AUTHOR]