Search

[Display omitted] • Production enhancement effect of underlying gas on hydrate reservoir is identified. • t 90 is reduced by nearly half as the underlying gas pressure increases by 3 MPa. • Underlying gas flow into the hydrate reservoir alleviates the temperature drop. • Underlying gas pressure shows no obvious effect on the average gas–water ratio. The marine hydrates with underlying gas show great commercial potential as a new cleaner alternative energy. Yet the effects of underlying gas on the production characteristics of marine hydrate reservoirs are still unclear. In this study, the clayey-silt marine sediments sampled in South China Sea were used to synthesize the excess-water methane hydrate samples with consistent porosity (38%) and three-phase saturation. Depressurization was conducted to produce gas from hydrate reservoirs and underlying gas with different pressures (3–6 MPa). The results indicate that the underlying gas pressure has a positive correlation on hydrate decomposition, gas production, and water production; yet its effect on the gas–water ratio is not significant. As the underlying gas pressure increased from 3 MPa to 6 MPa, the average temperature drop of the entire hydrate reservoir was reduced by more than 0.5 K, and the time required for 90% hydrate decomposition (t 90) was shorted by nearly half. The underlying gas flowing into the hydrate reservoir is beneficial to alleviate the drops of pressure and temperature and promote the formation of gas–water flow channels. Therefore, the production of underlying gas can not only improve the gas production potential but also effectively contribute to hydrate decomposition and avoid ice formation. Through comprehensive evaluation of hydrate decomposition time, reservoir temperature drops, and average gas–water ratio, the enhancement effect of underlying gas on hydrate reservoir exploitation is preliminarily demonstrated. The results of this study prove the importance of underlying gas and show the prospect of further research on marine hydrate reservoirs with underlying gas for commercial exploitation. [ABSTRACT FROM AUTHOR]

• Underlying gas pressure determines the hydrate saturation when f g − f eq < 2.6 MPa. • Hydrate dissociation front advanced with gradient pressure formed by underlying gas. • The production of hydrate dissociated gas and underlying gas are interdependent. • Underlying gas improves the gas recoverability and potential of hydrate reservoirs. Hydrate reservoirs with underlying gas are generally accepted as the most promising energy resource for commercial exploitation. The underlying gas is an important part of the energy recovery of hydrate reservoirs. However, the gas production characteristics of hydrate reservoirs with underlying gas are rarely discussed. This paper aims to analyze the effects of underlying gas on the formation of hydrate and methane production behaviors by depressurization. In a core holder, marine soil obtained from the South China Sea was used to remold muddy low-permeability cores. The hydrate saturation of the muddy cores ranged from 25.2% to 48.3%. In this work, when the pressure difference between the underlying gas and the hydrate phase equilibrium is less than 2.6 MPa, the underlying gas pressure is the decisive factor for hydrate saturation. Besides, underlying gas can provide a relatively slow pressure drop rate for hydrate decomposition. The low permeability of the core caused by high hydrate saturation weakens the production of underlying gas and leads to the pressure gradient in the core. Hydrate decomposition front advances with the pressure gradient. Therefore, the production of underlying gas and hydrate decomposition are interdependent during depressurization. The experimental results demonstrated the existence of underlying gas could boost the exploitation potential and gas recoverability of hydrate reservoirs. These findings expand the understanding of joint exploitation characteristics and provide guidance in assessing the production potential for further researches and field exploitation of hydrate reservoirs with underlying gas. [ABSTRACT FROM AUTHOR]

• Confining pressure surrounding the core was adverse to gas production. • Hydrate and free gas were easily trapped in sediment pores under confining pressure. • Hydrate and water in sediment pores severely slowed down the gas production rate. • Water content increased water production while hardly affected water conversion. The abundant methane hydrates stored in marine sediments have been widely evaluated as a potential energy source. Understanding the gas and water production characteristics of methane hydrate-bearing marine sediments is critical for hydrates commercial exploitation. In this study, confining pressure was applied to simulate a sub-seafloor environment. Methane was repeatedly injected into cores to remold hydrate-bearing marine sediments with different hydrate saturation. The hydrate saturation increased from 10.6% to 21.6% as the water content increased from 8.9% to 22.2%. The results indicate that the higher the core water content, the greater the hydrate saturation and the longer the hydrate dissociation time. The gas production characteristics of hydrate-bearing sediments were severely affected by water and hydrates in pores. The results indicated that some hydrates and free gas were easily trapped by the surrounding soil, meaning that the hydrates were isolated and disconnected with the pore channels under confining pressure during depressurization. Thus, a second depressurization was conducted to achieve further gas production. For cores with different water contents, their water conversion percentage is approximately 20%. When the water content exceeded 16.7%, the water production was observed. The results of this study are meaningful for further related research and field production of marine hydrates. [ABSTRACT FROM AUTHOR]

There are four main classes of methane hydrate deposits in nature. These classes differ in their distributions of the methane hydrate layer, free water layer and free gas layer. The gas production rate, water production rate, gas-to-water ratio, gas and water production recovery during the depressurization dissociation process are different for hydrate samples of different classes. Water-excess hydrate samples of Classes 2 and 3 were prepared in the present work, and they were dissociated at 2.0 MPa, 2.3 MPa, 2.6 MPa and 3.0 MPa. Ice formation was observed when the backpressure was 2.0 MPa. The gas-to-water ratio for Class 3 samples was higher than that of Class 2 samples, regardless of the backpressure. The average gas production rate for the 90% overall gas amount of Class 2 samples was higher than that of Class 3 samples for a backpressure of 2.0 MPa, whereas the opposite result was found for backpressures equal to or greater than 2.3 MPa. Furthermore, the water recovery value of Class 2 samples was higher than that of Class 3 samples by approximately 10%, and the gas recovery value of Class 2 samples was lower than that of Class 3 samples by approximately 20% at the same backpressure. These experiments provided some basic data for the exploitation of Class 2 and Class 3 deposits and find out the influence of backpressure on methane hydrate dissociation of the two class deposits by depressurization. [ABSTRACT FROM AUTHOR]

• Hydrate reformation during exploitation is caused mainly by insufficient heat supply. • Hydrate reformation is likely to occur in the depressurization process. • The depressurization process should be combined with thermal stimulation. • A new system is designed to investigate hydrate reformation under various conditions. Natural gas hydrates are considered as some of the most promising energy sources. However, economical, safe, and commercial exploitation of marine hydrates has not yet been achieved. One of the main obstacles is hydrate reformation in the process of hydrate exploitation, which needs to be properly addressed. The processes of hydrate dissociation and reformation under depressurization and thermal stimulation are discussed in this review. It is necessary to understand the manner in which various factors affect hydrate reformation during dissociation. Therefore, the effects of critical factors on hydrate reformation during thermal stimulation and depressurization dissociation are analysed to provide a comprehensive explanation of the hydrate reformation mechanism. In addition, several measures used to prevent hydrate reformation during the exploitation process are discussed. Finally, an experimental system was designed to investigate the exploitation methods and optimization of various hydrate-bearing sediments. Future efforts should focus on finding effective methods and evaluating the combined sequences, which can prevent hydrate reformation with acceptable exploitation efficiency. [ABSTRACT FROM AUTHOR]