Search

Gamma detectors consisting of lanthanum bromide (LaBr 3) scintillator and silicon photomultiplier (SiPM) have extensive applications in various scientific fields. Accurate gamma energy measurement depends on accurate calibration of these detectors. While some studies have attempted detector self-calibration based on the natural background of LaBr 3 , these methods are limited to specific LaBr 3 crystals and lack generality. To address this limitation, this paper proposes a self-calibration method that solely utilizes the natural radioactivity of 138La. By solving for the maximum similarity between the test background from measurement and the standard spectrum obtained from the Geant4 simulation, the detector is effectively calibrated. Furthermore, the application of a series of energy spectrum processing algorithms simplifies the solution complexity of the maximum similarity problem. Experimental results from four different crystals at varying temperatures demonstrate calibration errors of less than 0.8% at 662 keV, highlighting the method's broad applicability and accuracy. Besides, the influence of the background measurement time and the natural environmental background on the self-calibration method are discussed in detail, further illustrating the value of the application. [ABSTRACT FROM AUTHOR]

In order to improve the temporal response of SiC-HPMTs, a new SiC detector with a faster time response (leading edge 1.5 ns, FWHM 4 ns) was developed for constructing an improved SiC-HPMT. Then the properties of the improved SiC-HPMT were studied in detail. Compared with those of the previous SiC-HPMT, the temporal response of the improved SiC-HPMT, with a leading edge of about 2 ns and a FWHM of less than 5ns was effectively improved. The maximum linear current that exceeded 630 mA depends on both the accelerating and focusing voltage (V a) and the bias voltage (V SiC) of the SiC detector, but has a strong dependence on V a. The scintillation detector comprised of the improved SiC-HPMT and an EJ228 scintillator can accurately obtain the multiple peaks characteristic of the pulsed X-ray source, which indicates that the improved SiC-HPMT can well satisfy the requirements for measuring the time information of fast pulsed radiation fields. In addition, the SiC-HPMT should be placed at the position that deviates from the radiation beam to avoid the direct irradiation on the SiC detector. The improved SiC-HPMT will further expand its application in pulsed radiation field measurements and become a supplement for existing photoelectric detectors. [ABSTRACT FROM AUTHOR]