Search

A von Hamos spectrometer has been implemented in the vacuum interaction chamber 1 of the High Energy Density instrument at the European X-ray Free-Electron Laser facility. This setup is dedicated, but not necessarily limited, to X-ray spectroscopy measurements of samples exposed to static compression using a diamond anvil cell. Si and Ge analyser crystals with different orientations are available for this setup, covering the hard X-ray energy regime with a sub-eV energy resolution. The setup was commissioned by measuring various emission spectra of free-standing metal foils and oxide samples in the energy range between 6 and 11 keV as well as low momentum-transfer inelastic X-ray scattering from a diamond sample. Its capabilities to study samples at extreme pressures and temperatures have been demonstrated by measuring the electronic spin-state changes of (Fe0.5Mg0.5)O, contained in a diamond anvil cell and pressurized to 100 GPa, via monitoring the Fe K-fluorescence with a set of four Si(531) analyser crystals at close to melting temperatures. The efficiency and signal-to-noise ratio of the spectrometer enables valence-to-core emission signals to be studied and single pulse X-ray emission from samples in a diamond anvil cell to be measured, opening new perspectives for spectroscopy in extreme conditions research. [ABSTRACT FROM AUTHOR]

We describe the use of a silver-coated 90 ∘ parabolic mirror of 33 mm focal length as objective for imaging, on-axis laser heating and radiospectrometric temperature measurements of a sample compressed in a diamond anvil cell in a laser heating system. There, spatial resolution and imaging quality of the parabolic mirror are similar to the one of a 10× objective. The temperature measurements between 500 and 900 nm are essentially free from chromatic aberration. The parabolic mirror was also perforated with a 220-μm hole, allowing for on-axis imaging, laser heating and incidence of X-rays simultaneously at synchrotron facilities. The parabolic mirror is thus a well-suited alternative to existing refractive and reflective objectives in laboratory and synchrotron laser heating systems. [ABSTRACT FROM AUTHOR]

We present a new diamond anvil cell design, hereafter called mBX110, that combines both the advantages of a membrane and screws to generate high pressure. It enables studies at large-scale facilities for many synchrotron X-ray techniques and has the possibility to remotely control the pressure with the membrane as well as the use of the screws in the laboratory. It is fully compatible with various gas-loading systems as well as high/low temperature environments in the lab or at large scale facilities. The mBX110 possesses an opening angle of 85° suitable for single-crystal diffraction or Brillouin spectroscopy and a large side opening of 110° which can be used for X-ray inelastic techniques, such as X-ray Raman scattering spectroscopy, but also for X-ray emission, X-ray fluorescence, or X-ray absorption. An even larger opening of 150° can be manufactured enabling X-ray imaging tomography. We report data obtained with the mBX110 on different beamlines with single-crystal diffraction of stishovite up to 55 GPa, X-ray powder diffraction of rutile-GeO2 and tungsten to 25 GPa and 280 GPa, respectively, X-Ray Raman spectra of the Si L-edge in silica to 95 GPa, and Fe Kβ X-ray emission spectra on a basalt glass to 17 GPa. [ABSTRACT FROM AUTHOR]

X-ray emission and X-ray Raman scattering spectroscopy are powerful tools to investigate the local electronic and atomic structure of high and low Z elements in situ. Notably, these methods can be applied for in situ spectroscopy at high pressure and high temperature using resistively or laser-heated diamond anvil cells in order to achieve thermodynamic conditions which appear in the Earth's interior. We present a setup for combined X-ray emission and X-ray Raman scattering studies at beamline P01 of PETRA III using a portable wavelength-dispersive von Hamos spectrometer together with the permanently installed multiple-analyzer Johann-type spectrometer. The capabilities of this setup are exemplified by investigating the iron spin crossover of siderite FeCO3 up to 49.3 GPa by measuring the Fe M2,3-edge and the Fe Kβ1,3 emission line simultaneously. With this setup, the Fe valence-to-core emission can be detected together with the Kβ1,3 emission line providing complementary information on the sample's electronic structure. By implementing a laser-heating device, we demonstrate the strength of using a von Hamos type spectrometer for spin state mapping at extreme conditions. Finally, we give different examples of low Z elements' absorption edges relevant for application in geoscience that are accessible with the Johann-type XRS spectrometer. With this setup new insights into the spin transition and compression mechanisms of Earth's mantle materials can be obtained of importance for comprehension of the macroscopic physical and chemical properties of the Earth's interior. [ABSTRACT FROM AUTHOR]