Search

Electronic and mechanical properties, and their biocompatibility, make diamond-based materials promising biomedical applications. The cost required to produce high quality single crystalline diamond films is still a hurdle to prevent them from commercial applications, but the emergence of polycrystalline diamond (PCD) films grown by chemical vapour deposition (CVD) method has provided an affordable strategy. PCD films grown on silicon wafer have been used throughout and were fully characterised by SEM, XPS, Raman spectroscopy and FTIR. The samples contain nearly pure carbon, with impurities originated from the CVD growth and the silicon etching process. Raman spectroscopy revealed it contained tetrahedral amorphous carbon with small tensile stress. The sp2 carbon content, comprised between 16.1 and 18.8%, is attributed to the diamond grain boundaries and iron-catalysed graphitisation. Antibacterial properties of PCD films were performed with two model bacteria, i.e. Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) using direct contact and shaking flask methods. The samples showed strong bacteriostatic properties against S. aureus and E. coli with the direct contact method and no influence on planktonic bacterial growth. These results suggest that the bacteriostatic mechanism of PCD films is linked to their surface functional groups (carbon radicals and –NH 2 and –COOH groups) and that no diffusible molecules or components were involved. [ABSTRACT FROM AUTHOR]

Polycrystalline CVD diamond films were subjected to transient heat treatment at the temperature range of 1500–1900 °C in the Ar/H 2 plasma arc environment. The structural changes of the diamond grain boundaries (GB) were indirectly investigated by employing IR optical absorption, Raman spectroscopy, X-ray diffraction (XRD), and fractographic scanning electron microscopy (SEM). The graphitization difference between near-nucleation side and near-growth side is mainly due to the difference in the GBs' content. It is proposed that the bonded‑hydrogen atoms, of which a large amount remained in the diamond GBs, play an active role in the process of graphitization. We recognized the intensity evolution of a peak in Raman spectra located at 1470 cm−1, which was attributed to the trans -polyacetylene at diamond GBs. This result suggests the likelihood that the long-chain hydrocarbon precursor is involved in a mechanism for the sp3-to-sp2 transformation. As the propagation of the graphitization from diamond GB to grain interior, sp2 carbon with compressed state forms in its place due to the limited space for expansion. The graphite along GBs affects the fracture mode of the diamond films, which causes partial GBs to tear, while transgranular fracture occurs instead of directly intergranular fracture. [Display omitted] • A transient heat treatment method was employed to effectively keep the GB graphitization at an early stage. • The Graphitization model demonstrated the long-chain hydrocarbon precursor was involved in the sp3-to-sp2 transformation. • The fracture of annealed diamond was completed between transgranular and intergranular crack propagation. [ABSTRACT FROM AUTHOR]