Search

Polymer composites with high energy density have been of great interest to scientists for a long time, and this accounts for a great wealth of experimental data that are available for interpretation. One of the important phenomena is the variation rate of the permittivity of composites, which always deviates from the linear increase and rises steeply toward the high concentration. Interestingly, the critical transition concentration is always located in the range of 20 vol. %–25 vol. %, but still far less than the common percolation threshold of composites. Through the analysis of the local electric field distribution and surface polarized charges distribution, the phenomenon is successfully interpreted as the effect of the electrostatic interactions between the adjacent polarized particles. Two specified composite configurations (BCC and FCC) are designed, and their dielectric properties have been systematically studied with the help of the finite element method and the phase field method. The simulation results indicate that the strength of the particles' interaction is short-range effective and depends closely on the gap distance between adjacent particles. When the gap distance is smaller than 0.8 times the radius of the particles, which is tantamount to the concentration larger than 20 vol. % and 25 vol. % for BCC and FCC, respectively, the electrostatic interaction of the particles is rather significant, resulting in an additional contribution on the variation of the dielectric properties of composites and vice versa. The synchronous variation tendency between the simulation results and experimental measurements demonstrates the effect of electrostatic interaction on the dielectric properties of composites. [ABSTRACT FROM AUTHOR]

Dielectric elastomer actuators (DEAs) with large electrically-actuated strain can build light-weight and flexible non-magnetic motors. However, dielectric elastomers commonly used in the field of soft actuation suffer from high stiffness, low strength, and high driving field, severely limiting the DEA's actuating performance. Here we design a new polyacrylate dielectric elastomer with optimized crosslinking network by rationally employing the difunctional macromolecular crosslinking agent. The proposed elastomer simultaneously possesses desirable modulus (~0.073 MPa), high toughness (elongation ~2400%), low mechanical loss (tan δm = 0.21@1 Hz, 20 °C), and satisfactory dielectric properties ( ε r = 5.75, tan δe = 0.0019 @1 kHz), and accordingly, large actuation strain (118% @ 70 MV m−1), high energy density (0.24 MJ m−3 @ 70 MV m−1), and rapid response (bandwidth above 100 Hz). Compared with VHBTM 4910, the non-magnetic motor made of our elastomer presents 15 times higher rotation speed. These findings offer a strategy to fabricate high-performance dielectric elastomers for soft actuators. Dielectric elastomer actuators (DEAs) with large electrically actuated strain can be used in non-magnetic motors, but high stiffness, poor strength and slow response currently limit the application of DEAs. Here, the authors optimize the crosslinking network in a polyacrylate elastomer to enable a DEA with high toughness and actuation strain and use the polyacrylate to build a motor which can be driven under low electric field. [ABSTRACT FROM AUTHOR]

For practical application, studying the mechanism governing the macroscopic dielectric properties of polymer composites at low concentration is of great significance. A three-dimensional (3D) representative model with randomly dispersed grains in polymer matrix has been established and calculation results of effective permittivity of BT/PVDF composites with finite element method (FEM) show good consistency with experimental measurements, which demonstrate that the distribution of electric field in ceramic particles/polymer composites at low concentration can be approximated by the electrostatic field. Furthermore, the relationship between the internal electric field and dielectric properties of composites has been established. The effect of grain size in submicron and its dielectric constant to the effective permittivity of composites are fully investigated. The former shows of negligible significance compared with the evident effect of volume fraction, while the latter presents saturation as increasing the permittivity ratio between ceramic particle and polymer. [ABSTRACT FROM AUTHOR]