Search

Abstract: Low-wetting low-hydrophilicity polipropylene fiber has been treated by means of non-thermal dielectric barrier discharge plasma. The fiber has been characterized before and after the treatment by scanning electron microscopy (SEM), X-ray diffraction, atomic force microscopy (AFM) and industrial tests of submersion in water. The cold plasma was generated in a helium–air mixture at a 2kHz frequency and 12–18kV potential. The treatment periods ranged from 1min up to 3min. The results present an increase in the oxygen content which rose from 2.5% to 4.8%. SEM analysis reveals a surface change of the fiber with the formation of nodules, which is confirmed by AFM. Water submersion experiments show an enhancement of the hydrophilic capability of the samples. [Copyright &y& Elsevier]

This paper presents an experimental study of the inactivation in water of two representative classes of bacteria, Gram-negative Escherichia coli and Gram-positive Bacillus subtilis, using pulsed dielectric barrier discharges (PDBDs) in a coaxial arrangement. To this purpose, an adjustable plasma source supplies 25-kV/500-Hz pulses, 30 \mu\s long, at atmospheric pressure, with total energy consumption estimated at about 100 mJ/pulse. The inactivation effect of a PDBD on these types of microorganisms has been previously studied in dependence on an oxygen gas flow mode (null, continuous, and modulate). The results have shown a significant bacterial reduction rate from 10^8 to 10^3\ \cells/mL with E. coli and from 10^7 to 10^3\ \cells/mL with B. subtilis. The inactivation effectiveness is substantially similar in both kinds of bacteria, although some data suggest a greater susceptibility of the Gram-negative E. coli to plasma exposure. Plasma diagnostics was carried out using optical emission spectroscopy whereby the OH radical and reactive oxygen species formation rates in solution were found and the level of ozone produced by the discharge was monitored. Finally, a kinetics model was developed to characterize the chemical species taking place in nonthermal plasma inactivation processes in water. [ABSTRACT FROM PUBLISHER]

The design, instrumentation and early operation results of a digitally controlled voltage source inverter (VSI) are described. This inverter has been structured from a three cell flying capacitor inverter (TCFCI). Two different inverter control modes - open-loop and closed-loop - are applied by a digital system based on a Texas Instrument TMS320C6713 digital signal processor (DSP) board. The VSI is able to generate AC voltage signals up to 120 V amplitudes at a maximal 6 A current, from ∼9 kHz to ∼60 kHz in ∼900 Hz steps in both controls by varying the signal period through the square-wave command strategy. The multi-cell structure of the inverter provides an output frequency nearly three times that of the TCFCI semiconductor commutation. The power output of the TCFCI can drive a high frequency step-up transformer which, in turn, is associated with a cylindrical reactor where dielectric barrier discharges (DBD) are conducted. [ABSTRACT FROM AUTHOR]

This paper presents a model of the typical dielectric barrier plasma discharge at atmospheric pressure, structured as an equivalent electric circuit whose elements are identified with, and deducted from, the main influential variables of the process, namely, the applied gas, the geometry of the reactor, the breakdown parameters, as well as the power supply associated to the dielectric barrier discharge cell. Considering a parallel-plate reactor and a high-voltage sinusoidal power supply, an electrical comprehensive Simulink/MATLAB model has been developed in order to reveal the interaction between these two elements. The main components of this discharge model are as follows: 1) a double dielectric capacitance; 2) a voltage-controlled current source; and 3) a gas capacitance associated to the ionized gas. A sinusoidal voltage of up to 15 kV peak to peak at frequencies of 12.5 and 47 kHz has been applied to the discharge electrodes. The electrical model is based on the power law proposed by Roth, which defines the V --I behavior during the discharge startup. A series of simulations has been carried out in order to estimate the total current and voltage consumed during each discharge and to identify those parameters which are not measurable during the process. Finally, both the experimental and simulated voltage and current results in helium, argon, and nitrogen, as well as their Q--V graphics, are shown, and a comparison between them is discussed. [ABSTRACT FROM AUTHOR]

• The development of a DBD reactor to evaluate the bacterial inactivation in water. • Efficiency of treatment with a 6 log10 reduction for E. coli and S. typhi. • 12 kV with oxygen was the minimum voltage to inactivate E. coli and S. typhi. This work presents the study of the voltage and oxygen effect on bacterial inactivation in water using a pulsed dielectric barrier discharge (DBD) under atmospheric pressure, where Escherichia coli (E. coli) and Salmonella typhi (S. typhi) bacteria were used as model microorganisms. A cylindrical DBD reactor was developed and tested in applications to assay the efficiency of bacterial inactivation in water on a volume of 500 mL flowing continuously throughout the system assisted with a peristaltic pump at 4.4 ± 0.1 mL/s. The efficiency of the treatment reached a 6-log 10 reduction for both E. coli and S. typhi bacteria at 106 CFU/mL of concentration at the end of the first cycle of treatment at a minimum voltage of 12 kV with oxygen bubbling gas, concluding that there was a minimum voltage to produce inactivation of E. coli and S. typhi samples. Bacterial inactivation without the oxygen condition contrasted with the high rate of inactivation with oxygen at relatively low voltage discharges. [ABSTRACT FROM AUTHOR]