Search

Application of the nonthermal plasma (NTP) technology for NOX removal from diesel engine exhaust has already been experimentally proved to be an efficient method at laboratory level. The NOX removal efficiency depends on various electrical and physical parameters, and very few studies have been carried out to predict it with the variation in those parameters. In this paper, an approach has been made using dimensional analysis to predict the NOX concentration with the NTP treatment, based on its dependence on various operating parameters. A relation has been obtained between NOX concentration and 11 numbers of parameters affecting NOX removal so as to form dimensionless groups. A mathematical model has been established using the experimental data and nonlinear regression technique. Experiments are conducted to validate this model with variations in the parameters voltage, flow rate, temperature, discharge gap width, and initial NOX concentration. The predicted NOX concentration values have been found to be well matched with the experimental results. The rms errors for the test data are found to be 4.64%, and in ppm, it is 9.58. [ABSTRACT FROM AUTHOR]

With ever more stringent \NOX emissions, it is necessary to examine removal of nitrogen oxide from diesel engine exhaust. This paper describes the study of \NOX reduction from 5.9-kW stationary diesel engine exhaust under nanosecond pulse energization. Two plasma reactors characterized by dielectric barrier discharge has been designed, built, and evaluated. One of the reactor designs include nine numbers of electrodes kept in parallel, and the exhaust was allowed to pass axially, whereas the second reactor consists of nine parallel electrodes and the exhaust was allowed to pass radially. The reactors were individually tested for the treatment of nitrogen oxides for gas flow rate of 2, 5, and 10 L/min. Both the reactors have been individually tested, and results show an appreciable removal of \NOX with equal discharge volume. From the results, it was found that both the reactors were an efficient \NOX removal. With consumption of only 36 J/L, the reactors had shown a considerable 45% \DeNOX efficiency. [ABSTRACT FROM AUTHOR]

Red mud is a waste by-product generated during the processing of bauxite, the most common ore of aluminium. With the presence of ferric oxide, high surface area, resistance to poisoning and low cost, red mud made itself a good alternative to the existing commercial automobile catalyst. The cascading of dielectric barrier discharge plasma with red mud improved the NOX removal from diesel engine exhaust significantly. The DeNOX efficiency with discharge plasma was 74% and that with red mud was 31%. The efficiency increased to 92% when plasma was cascaded with red mud catalyst operating at a temperature of 400°C. The NOX removal was dominated by NO2 removal. The studies were conducted at different temperatures and the results were discussed. [ABSTRACT FROM AUTHOR]

In this paper studies were carried out on two compact electric discharge plasma sources for controlling nitrogen oxides (NOX) emission in diesel engine exhaust. The plasma sources consist of an old television flyback transformer to generate high frequency high voltage ac (HVAC) and an automobile ignition coil to generate the high voltage pulses (HV Pulse). The compact plasma sources are aimed at retrofitting the existing catalytic converters with electric discharge assisted cleaning technique. To enhance NOX removal efficiency cascaded plasma-adsorbent technique has been used. Studies were reported at different flow rates and load conditions of the diesel engine. [ABSTRACT FROM PUBLISHER]

In this paper, a different type of cross flow dielectric barrier discharge (DBD) reactor was designed and tested. Here the gas flow is perpendicular to the barrier discharge electrode. Discharge plasma was utilized to oxidize NO contained in the exhaust gas to NO2 and subsequent NO2 removal can be improved using an adsorbent system. A detailed study of DeNOX in a stationary diesel engine exhaust was carried out using pulsed electrical discharges/adsorbent processes. Activated alumina (Al2O3) and MS-13x were used as adsorbents at room temperature. The main emphasis is laid on the removal of NOX from the filtered diesel engine exhaust. In filtered exhaust environment, the cross flow reactor along with adsorbent exhibits a superior performance with regard to NOX removal when compared to that with axial flow of gas. In this paper we bring out a relative comparison of discharge plasma and plasmaadsorbent process at various gas flow rates, ranging from 2 l/min to 25 l/min. The discharge plasma-adsorbent assisted barrier discharge reactor has shown promising results in NOX removal at high flow rates. [ABSTRACT FROM PUBLISHER]