Search

Purpose: Spark ignition (SI) engines are used in a wide area in the transportation industry, from road vehicles to piston-prop aircraft. On the other hand, the decrease in reserves of fossil fuels used in SI engines and the increase in greenhouse gas emissions makes the use of alternative fuels inevitable. In this paper, optimization of in-cylinder combustion and engine performance parameters by intake-charge conditions [i.e. intake-air temperature, injection timing and exhaust gas recirculation (EGR)] in a hydrogen (H2)-fueled small SI engine is performed. Design/methodology/approach: Experimental studies were performed at a 1,600 rpm engine speed of a single-cylinder, air-cooled engine having a stroke volume of 476.5 cm3, maximum output power of 13 HP and torque of 25 Nm. The hydrogen-fueled SI engine was operated by a lean air-fuel mixture (ϕ = 0.6) under wide-open throttle (WOT) conditions. Findings: The findings of the paper show that improvements can be achieved in in-cylinder combustion, indicated engine performance, exhaust NOx emissions with optimum intake-air temperature, the start of H2 injection and the ERG rate. Practical Implications: It has been determined that a 32°C intake-air temperature, 395°C (bTDC) start of H2 injection, and 5%–10% EGR rates are the most suitable values for the examined hydrogen fueled SI engine. Originality Value: Hydrogen is a usable alternative fuel for SI engines used in a wide area from road vehicles to piston-prop aircraft engines. However, a number of problems remain that limit hydrogen fueled SI engines to some extent, such as backfire, a decrease of engine power, and high NOx emissions. Therefore, it is appropriate to examine the effects of intake-charge conditions on in-cylinder combustion, engine performance, and NOx emissions parameters in a hydrogen fuelled SI engine. [ABSTRACT FROM AUTHOR]

Polyoxymethylene dimethyl ethers (PODE) and methanol are both promising alternative fuels with high oxygen content, and the combustion and emission characteristics of PODE/methanol blends were investigated in a common-rail engine. The premixed charge compression ignition (PCCI) combustion was realized by appropriate match of main injection and pilot injection strategies. The effects of methanol ratio (0– 20%) on fuel economy and emissions formation were studied in conventional compression ignition (CI) and PCCI modes. The combustion and emission characteristics were improved by adjusting the pilot injection timing (−40 ~ −24 °CA ATDC) and pilot injection ratio (0– 20%). The results show that the increase of methanol ratio prolongs the ignition duration, increases the premixed combustion ratio and reduces NOx emissions. PCCI combustion increases the brake thermal efficiency (BTE) and improves the trade-off relationship between NOx and soot. The delay of pilot injection timing increases the BTE, decreases HC, CO and HCHO emissions, but increases NOx and soot emissions. The appropriate pilot injection ratio can significantly increase the BTE, and has little effect on the emission characteristics. Under the optimized pilot injection strategy and appropriate methanol ratio conditions, the maximum BTE of the blends can reach 46.58% and maintain low emission level. [Display omitted] • PODE/methanol blends can completely replace diesel fuel on the common-rail engine. • The addition of methanol increases HC, CO and HCHO emissions, while reduces NOx. • PCCI mode can improve the BTE and the trade-off relationship between NOx and soot. • Delaying pilot injection makes heat release process from single-peak to double-peak. • BTE of P95M5 reaches the highest value of 46.58% with optimized injection strategy. [ABSTRACT FROM AUTHOR]