Search

This work examines the effect of ultrasound irradiation (UI) on biodiesel properties and transesterification parameters. Methanol content, reaction time, reaction temperature, and catalyst concentration are varied, and the optimum condition for maximum possible yield was held constant for both processes. Biodiesel obtained from non-edible oils is the most promising alternative fuel for conventional diesel fuel. In this study, sterculia foetida seed oil was used for biodiesel production. Sterculia foetida oil was transesterified to lower its FFA using UI and compared with the conventional process. Both heating processes were optimized to yield a maximum of 94.3% at a six molar ratio, 50 °C, (water temp), 1% wt of catalyst (KOH), and 75 min reaction time. Transesterification by UI reduced the total reaction time to 4 min compared to 75 min at the conventional process. Further UI influenced the properties of biodiesel (SOBD) from SO. UI lowered viscosity by 7.3% and density by 5.5% and facilitated using oxygen content of SOBD. [ABSTRACT FROM AUTHOR]

This study is aimed at reducing NOx, Smoke, HC, CO emissions from single-cylinder, four-stroke, and water cooled diesel engine. The research engine is fueled with diesel and two blends of butanol and diesel at atmospheric conditions. Neat diesel is termed as D100, 10%, and 20% Volume of butanol dispersed in D100 is termed as D90B10 and D80B20 respectively. The chemical and physical properties of D100, D90B10 and D80B20 fall within the limits of ASTM standards. Results revealed that enhanced chemical properties and higher latent heat of vaporization of butanol lowered the CO, HC, smoke, and NOX emissions of diesel fueled research diesel engine. [ABSTRACT FROM AUTHOR]

This work examines the effect of butanol as an oxygenated additive to lower carbon monoxide, smoke, nitrogen oxide and hydrocarbon emissions and to improve the performance aspects of Calophyllum inophyllum (Punnai) biodiesel. Single-cylinder, oil-cooled compression ignition engines are employed in this work. Neat Punnai biodiesel (P100) is blended with butanol at 10% and 20% by volume and labelled as B10P90 and B20P80, respectively. Methanol and alkaline catalyst (KOH) were used for the transesterification process for biodiesel production. The transesterification technique yielded 88% biodiesel from raw Punnai oil. Engine tests resulted in lower CO, smoke, NOx and HC emissions when fuelled with both butanol blends when compared to P100. In addition, BSFC (brake-specific fuel consumption) reduced and BTE (brake thermal efficiency) increased with the inclusion of butanol blends (B10 and B20) to neat Punnai biodiesel. [ABSTRACT FROM AUTHOR]

Abstract High cetane number and energy content of octanol can be an excellent alternative fuels for existing diesel engines. It is necessary to have an extensive analysis on octanol as an additive in diesel engines. In this study neat mahua oil biodiesel is blended with different proportion of octanol in stationary diesel engine to observe its emission characteristics. Mahua oil biodiesel is prepared by conventional transesterification. The main aim of this study is to reduce various emissions of mahua oil biodiesel by appending octanol. This study discovered a significant reduction in all the emissions associated with mahua oil biodiesel by appending octanol at different proportions. [ABSTRACT FROM AUTHOR]

This study examines the prospect of utilizing biodiesel from non-edible, waste seed derived from grapefruit. The prepared biodiesel was intended to replace the diesel fuel in a research diesel engine. Two antioxidants namely BHA (Butylated Hydroxyanisole) and BHT (Butylated Hydroxytoluene) are partially blended to enhance the ignition patterns of diesel/biodiesel blends. 30% volume of grape-seed biodiesel (BD) is blended with 70% volume of diesel and identified as base fuel. 10% volume of two antioxidants is equally blended to base fuel to enhance its physic-chemical properties. Upon blending the antioxidants, no change in phase was observed for base fuel. Performance results found that BHA and BHT addition lowered 1.2–1.4% of BSFC, and improved 0.7–1.1% of BTE of diesel/biodiesel blends respectively. Besides, BHA and BHT inclusion improved the physio-chemical properties of diesel/biodiesel blends and produced a prominent increase in In-Cylinder Pressure (ICP) and heat release rate (HRR). Emissions results revealed that BHA and BHT addition lowered 1.8–2.1%% of CO, 2.2–2.6% of HC of diesel/biodiesel blends. Further, a higher cetane number of BHA and BHT improved the combustion and lowered smoke (2.9–3.4%) and NO (1.9–3.7%) emission for diesel/biodiesel blends. [ABSTRACT FROM AUTHOR]