Search

This study examines the impact of the oxygenated additives namely DTBP (Di-Tetra-Butyl-Phenol) and 1-Pentadecanol (1-DEC) on emissions, combustion and performance patterns of Karanja biodiesel/diesel blends. Two additives were selected as ignition improver owing to their improved physicochemical properties. The additives were mixed at 10% volume with the equal blends of diesel and biodiesel. Experimental results revealed that by adding additives and biodiesel to diesel found no phase separation. HRR and peak pressure were highest for diesel and least for KBD/D blends. However, blending the additives enhanced its HRR and peak pressure. Addition of additives lowered the harmful emissions significantly with a slight increase in NO emissions to the KBD/D blends. In addition, a noteworthy increase in performance aspects was observed for KBD/D blends by adding DTBP and 1-Pentadecanol. [ABSTRACT FROM AUTHOR]

This study is aimed at reducing NOx, Smoke, HC, CO emissions from single-cylinder, four-stroke, and water cooled diesel engine. The research engine is fueled with diesel and two blends of butanol and diesel at atmospheric conditions. Neat diesel is termed as D100, 10%, and 20% Volume of butanol dispersed in D100 is termed as D90B10 and D80B20 respectively. The chemical and physical properties of D100, D90B10 and D80B20 fall within the limits of ASTM standards. Results revealed that enhanced chemical properties and higher latent heat of vaporization of butanol lowered the CO, HC, smoke, and NOX emissions of diesel fueled research diesel engine. [ABSTRACT FROM AUTHOR]

This work examines the effect of butanol as an oxygenated additive to lower carbon monoxide, smoke, nitrogen oxide and hydrocarbon emissions and to improve the performance aspects of Calophyllum inophyllum (Punnai) biodiesel. Single-cylinder, oil-cooled compression ignition engines are employed in this work. Neat Punnai biodiesel (P100) is blended with butanol at 10% and 20% by volume and labelled as B10P90 and B20P80, respectively. Methanol and alkaline catalyst (KOH) were used for the transesterification process for biodiesel production. The transesterification technique yielded 88% biodiesel from raw Punnai oil. Engine tests resulted in lower CO, smoke, NOx and HC emissions when fuelled with both butanol blends when compared to P100. In addition, BSFC (brake-specific fuel consumption) reduced and BTE (brake thermal efficiency) increased with the inclusion of butanol blends (B10 and B20) to neat Punnai biodiesel. [ABSTRACT FROM AUTHOR]

The present work is aimed to analyze the performance and emission characteristics of mahua biodiesel-fueled diesel engine with copper oxide nanoparticle at various particle sizes (10 and 20 nm) and the results compared with conventional diesel fuel (BD). Experiments were conducted in a four-stroke, single-cylinder, constant speed, and naturally aspirated research diesel engine with an eddy current dynamometer. Conventional transesterification process is carried out to convert the raw mahua oil into mahua oil biodiesel (BD100). Copper oxide (CuO) was chosen as a nanoparticle; the mass fraction of 100 ppm and the particle sizes of 10 and 20 nm were blended with mahua oil methyl ester using an ultrasonicator, and the physicochemical properties were measured. The physicochemical properties of BD100 and nanoparticle-included BD100 are at par with EN14214 limits. Brake-specific fuel consumption (BSFC) of BD100 is higher than that of diesel, and brake thermal efficiency (BTE) is lower than that of diesel (D100). The inclusion of 10-nm particle size of CuO nanoparticle in BD100 improves the BSFC and BTE by 1.3 and 0.7%, respectively, when compared with BD100. The CuO nanoparticle inclusion at 20-nm nanoparticle in biodiesel further improves the performance parameters than those at 10-nm nanoparticle. Further, the BD100 promotes a lower level of smoke emissions, carbon monoxide (CO), and hydrocarbon (HC) and with a prominent increase in oxides of nitrogen (NOx) emissions. The inclusion of 10-nm particle size of CuO nanoparticle in BD100 reduces the NOx, HC, CO, and smoke emission by 3.9, 5.6, 4.9, and 2.8%, respectively, at peak load condition when compared with BD100. The addition of CuO nanoparticle at 20-nm nanoparticle in biodiesel further reduces the NOx, HC, CO, and smoke emissions. [ABSTRACT FROM AUTHOR]

The present experimental work investigates the use of ethyne gas in biodiesel-fueled diesel engine at different flow rate of 1, 2, and 3 L/min and is compared with diesel operation. This work is aimed to examine the outcome of ethyne gas by dual-fuel operation on emission characteristics of neat biodiesel-fueled stationary diesel engine. The oil derived from mustard seeds are employed as a source for biodiesel. The work was carried out at 2100 rpm (speed) and at an optimal compression ratio of 17. Based on the outcome of this investigation, the maximum reduction in hydrocarbon (25.1%), carbon monoxide (17.24%), and smoke emission (24.8%) was observed for biodiesel-ethyne at 3 L/min than the neat biodiesel. However, NOx emissions were found to be 15.8% higher for ethyne-biodiesel fueling at 3 L/min owing to increase in combustion gas temperature than neat biodiesel. [ABSTRACT FROM AUTHOR]

Biodiesels from the mustard oil promise to be an alternative to the conventional diesel fuel due to their similarity in properties. Higher alcohols are added to neat Mustard oil biodiesel (M100) to vary the properties of biodiesel for improving its combustion, emission and performance characteristics. N-Octanol has the ability to act as an oxygen buffer during combustion which contributes to the catalytic effect and accelerates the combustion process. N-Octanol is dispersed to neat Mustard oil biodiesel in the form of emulsions at different dosage levels of 10, 20 and 30% by volume. Three emulsion fuels prepared for engine testing constitutes of 90% of biodiesel and 10% of n-Octanol (M90O10), 80% of biodiesel and 20% of n-Octanol (M80O20) and 70% of biodiesel and 30% of n-Octanol (M70O30) by volume respectively. AVL 5402 diesel engine is made to run on these fuels to study the effect of n-Octanol on combustion, emission and performance characteristics of the mustard oil biodiesel. Experimental results show that addition of n-octanol has a positive effect on performance, combustion and emission characteristics owing to its inbuilt oxygen content. N-octanol was found to be the better oxidizing catalyst as it was more effective in reducing HC and CO emissions. A significant reduction in NOx emission was found when fuelled with emulsion techniques. The blending of n-octanol to neat Mustard oil biodiesel reduces the energy and fuel consumption and a marginal increase in brake thermal efficiency. Further, n-octanol also reduces the ignition delay and aids the combustion. [ABSTRACT FROM AUTHOR]

This work investigates the effect of urea injection parameters on the reduction of NOxemissions from a 4-stroke twin-cylinder diesel engine fueled with neat biodiesel. The test plan was designed by employing L9(34) Taguchi orthogonal array. It has been experimentally found that the concentration of urea, the flow rate of urea and increase in spray angle has a significant effect on reducing in NOxemissions of the diesel engine when fuelled with neat biodiesel. Further, ANOVA results reveal that the concentration and flow rate of urea are the major parameters in reducing NOxemissions whereas, mixing length and spray angle have minimal effect on reduction in NOxemissions. Since the predicted value derived from Taguchi technique is in accordance with the test results from the confirmation test, the predictive capability of this technique in the study shall be inferred. [ABSTRACT FROM PUBLISHER]

The present work is intended to investigate the emission characteristics of neat cashew nut shell methyl ester (CNSME100) by adding pentanol at two different proportions and compared with the baseline diesel. CNSME100 is prepared by the conventional transesterification process. CNSME100 is chosen due to its non-edible nature. Pentanol is chosen as an additive because of its higher inbuilt oxygen content and surface to volume ratio which reduces the drawbacks of neat CNSME100. Emission characteristics were carried out in single cylinder naturally aspirated CI engine fuelled with neat cashew nut shell methyl ester (CNSME), cashew nut shell methyl ester and pentanol by 10% volume (CNSME90P10), cashew nut shell methyl ester and pentanol by 20% volume (CNSME80P20), and diesel. This work also aims to investigate the feasibility of operating an engine fuelled with neat methyl ester and alcohol blends. Experimental results showed that by blending higher alcohol to neat cashew nut shell methyl ester reduces the emissions significantly. It is also found that the emission from neat methyl ester and pentanol blends is lesser than diesel at all loads. [ABSTRACT FROM AUTHOR]

This study examines the prospect of utilizing biodiesel from non-edible, waste seed derived from grapefruit. The prepared biodiesel was intended to replace the diesel fuel in a research diesel engine. Two antioxidants namely BHA (Butylated Hydroxyanisole) and BHT (Butylated Hydroxytoluene) are partially blended to enhance the ignition patterns of diesel/biodiesel blends. 30% volume of grape-seed biodiesel (BD) is blended with 70% volume of diesel and identified as base fuel. 10% volume of two antioxidants is equally blended to base fuel to enhance its physic-chemical properties. Upon blending the antioxidants, no change in phase was observed for base fuel. Performance results found that BHA and BHT addition lowered 1.2–1.4% of BSFC, and improved 0.7–1.1% of BTE of diesel/biodiesel blends respectively. Besides, BHA and BHT inclusion improved the physio-chemical properties of diesel/biodiesel blends and produced a prominent increase in In-Cylinder Pressure (ICP) and heat release rate (HRR). Emissions results revealed that BHA and BHT addition lowered 1.8–2.1%% of CO, 2.2–2.6% of HC of diesel/biodiesel blends. Further, a higher cetane number of BHA and BHT improved the combustion and lowered smoke (2.9–3.4%) and NO (1.9–3.7%) emission for diesel/biodiesel blends. [ABSTRACT FROM AUTHOR]

The objective of this work is to boost the performance characteristics, and to reduce emissions from neem biodiesel (BD100), and to explore the option of direct use of neat BD100 in a diesel engine. The biodiesel concentrations were maintained at 90 and 80% where the volumes of decanol were 10, 20%. This work revealed that the increase in decanol concentration was followed by the reduction in fuel consumption (0.9%) as well as the enhancement in thermal efficiency (0.5%) inside the engine. Smoke (3.2%), HC (2.4%) and CO (4.8%) level reduced with a consequence of minor higher NO X (4.3%) emissions than diesel. Additionally, Combustion front such as Heat release rate (HRR) and the peak pressure increased with decanol content for neem biodiesel. This study discloses that 80% of neem biodiesel and 20% of Decanol can enhance the diesel engine combustion, performance and emissions with no alterations. [ABSTRACT FROM AUTHOR]