Search

Based on the comparisons of several inverter configurations in the aspects of efficiency, response, volume, current distortion, and price, in this article, we present a feasible three-phase four-wire (3Φ4W) grid-connected hybrid-frequency parallel inverter system (HbFPIS) with ripple compensation to achieve low current distortion and fast response. An HbFPIS consists of a low-frequency-high-power inverter (LFHPI) and a high-frequency-low-power inverter (HFLPI) connected in parallel. An LFHPI design results in higher power output with lower frequency (LF) switching devices, such as insulated gate bipolar transistors (IGBTs) being more cost-effective. An HFLPI design can reduce switching loss by lowering the power requirement of high-frequency (HF) switching devices while increasing dynamic response. With the direct digital control and ripple compensation, LF current ripples are attenuated by the HFLPI to a smaller level, remaining mainly HF current ripples and, thus, resulting in smaller filter size and weight. The design of an HbFPIS ensures that the system has high power output with cost-effective devices, fast response, and smaller output filters. Ripple attenuation, current tracking capability, and inverter stability are analyzed in the article. Low current distortion and fast current tracking performance are validated by the 300-kW simulated and the 10-kW experimental results of a 3Φ4W HbFPIS in grid-connected and active power filter modes. [ABSTRACT FROM AUTHOR]

This paper presents bidirectional grid-connected modular multilevel converters (MMC) with direct digital control and division-summation processes to achieve power-injection and rectification functions. A direct digital control is developed to track current references, regulate dc-bus voltage and cell voltage, and balance the upper and lower dc-bus voltages. It can accommodate wide filter-inductance variation and take care of source voltage harmonics to achieve tight current tracking and low distortion output current. Based on the power-balance principle, the commands of arm currents can be determined directly. In this paper, the MMC configuration is introduced first, and then the control laws for current tracking and voltage regulation are derived in detail. Experimental and simulated results obtained from two 50 kW MMCs operated in power-injection and rectification modes have verified the analysis and discussion. [ABSTRACT FROM AUTHOR]

This paper presents a sinusoidal pulsewidth modulation (SPWM) based direct digital control with average-voltage model (AVM) and division–summation process for paralleled three-phase three-wire (3φ3W) grid-connected converters to reduce circulating currents. With the direct digital control, plant of each single-phase converter can be derived directly, and a controller is then designed to cover the variation effects of filter inductance and grid voltage. Based on SPWM and AVM over a switching cycle, each 3φ3W converter can be decomposed into three single-phase converters and each converter is controlled individually to track its sinusoidal reference current tightly, reducing circulating currents significantly. Equal current sharing is therefore also achieved. The control laws for achieving grid connection are derived in detail. In the design and implementation, the inductances corresponding to various inductor currents are measured offline and stored in the controller for scheduling loop gain cycle by cycle. Experimental and simulated results from a three-converter system confirm the analysis and discussion of the proposed control approaches. [ABSTRACT FROM AUTHOR]

This paper presents a three-phase back-to-back transformerless inverter for online uninterruptible power supply applications. The inverter consists of a three-phase three-wire input rectifier stage and a three-phase four-wire output inverter stage with their ground wires tied together. Both of the two stages are with sinusoidal pulse width modulation based division-summation (D-∑) digital control. The input stage controls the power flow between utility grid and dc link, regulates the dc-link voltage, and fulfills power factor correction. While the output stage tracks three-phase ac reference voltages. The proposed control laws derived based on the D-∑ digital approach take into account the effects of dc-link voltage fluctuation, grid-voltage distortion, and inductance variation due to different current levels. Thus, distortion of input current and output voltage, and filter inductor core size can be reduced significantly. Moreover, circulating current through their common ground can be suppressed effectively. Simulated and experimental results from a three-phase back-to-back transformerless inverter have confirmed the analysis and discussion of the proposed control approach. [ABSTRACT FROM PUBLISHER]

A division–summation (D-\mathbf\Sigma) digital control for three-phase inverters to achieve active and reactive power injection has been presented. It can overcome the limitation of abc to dq frame transformation. However, the D-\mathbf\Sigma control requires four sets of control laws to cover four quadrant operations, namely, grid connection (power factor (PF) 1 $\sim\pm$0.866), rectification with PF correction, PF leading (0 \sim$ 0.866), and PF lagging (0 \sim$ −0.866). Moreover, the switching sequences for the four modes are also different from each other, increasing complexity of firmware programming. In this paper, improvement of the control law derivation and region selection for the (D), which can obtain the control law directly. Measured results from a 10-kVA 3 $\phi$ bidirectional inverter have been presented to confirm the improvement. [ABSTRACT FROM PUBLISHER]

This paper presents two-phase modulated digital control for a three-phase bidirectional inverter with wide inductance variation in dc distribution systems. The bidirectional inverter can fulfill both grid connection and rectification with power factor correction. With the proposed control, the inverter can track its sinusoidal reference currents, and it is allowed to have wide inductance variation, reducing core size significantly. The control laws based on space-vector pulsewidth modulation are first derived with either an accurate approach or an approximated one, and the gate signals were then derived based on two-phase modulation for lower switching loss and switching noise spectra. Determination of control parameters and stability analysis are also presented. In the design and implementation, the inductances corresponding to various inductor currents were measured and tabulated into a single-chip microcontroller for tuning loop gain cycle by cycle, ensuring system stability. Measured results from a 10 kVA 3φ bidirectional inverter have been presented to confirm the feasibility of the discussed control approaches. [ABSTRACT FROM AUTHOR]