Search

P-band radar interferometry is a promising tool for digital terrain modelling in forested areas such as the Amazon due to the ability of P-band to penetrate densely forested areas. The quality of Digital Terrain Models (DTMs) is a primary requirement for many geoscience applications because DTM accuracy is an essential variable for characterizing landform shapes. This article presents a multicriteria evaluation of the overall quality of a digital terrain model produced using P-band SAR interferometric processing. The evaluation considers behaviours related to elevation and slope and analyses the impact of landscape properties such as slope and aspect. The multicriteria accuracy of the study showed promising results about the realism of landforms, according to applied geomorphological criteria, and also in the visual comparison between the produced DTM and the reference. The study provided an estimate of the accuracy of P-band radar DTM in terms of elevation with a standard deviation of 2.36 m and in terms of slope with a mean error of approximately −4°, a standard deviation of 4.74°, and a RMSE (Root Mean Square Error) slope error of 6.14°, using a reference DTM derived from an airborne LiDAR (Light Detection and Ranging) survey. The spatial behaviour of these errors and their sensitivity to slope and aspect were analysed. The investigation of hydrographic inconsistencies in the DTM was conducted based on various criteria, including identifying depressions along watercourses and adhering to Horton's law. Finally, the effects of the acquisition, processing, and resampling processes are revealed through indicators such as the rose histogram. This multicriteria study demonstrates the suitability of airborne P-band radar interferometry for digital elevation modelling in tropical rainforest environments. [ABSTRACT FROM AUTHOR]

The penetration capability of P-band radar waves through dense vegetation, along with the ability of tomography to separate the contributions of different layers in a vertical reflectivity profile, make P-band radar tomography a promising tool for digital terrain modeling in forested areas, specifically in dense tropical forests under which terrain topography remains poorly known. This paper aims to assess the overall quality of a digital terrain model (DTM) produced using tomographic processing of airborne P-band SAR imagery acquired during the TropiSAR campaign in French Guiana. Many quality descriptors are used to evaluate the quality of this DTM. Position and slope accuracies are computed based on a lidar DTM considered as the reference, and the impact of several parameters on these accuracies is studied, namely, slope, slope orientation, off-nadir angle and local incidence angle. The realism of the landforms is also studied according to geomorphological criteria. The results of this multicriteria accuracy assessment show the high potential of P-band SAR tomography in depicting the topography under forests, despite the intrinsic limitations related to the slant range geometry: the absolute elevation error is around 2 m; the slope is overestimated with an error of about 16°, mainly due to a processing artifact for which easy and direct solutions exist. Indeed, this error is equal to about 3° in flat artifact-free areas. These errors vary depending on the acquisition parameters and the local topography. The shapes are globally well preserved. These results are also discussed in the frame of the upcoming BIOMASS mission developed by the European Space Agency (ESA) and expected to be launched in 2024. [ABSTRACT FROM AUTHOR]

The purpose of this paper is twofold, considering first the generalization of a multichannel speckle filter in order to handle temporal stacks of polarimetric SLC SAR data, and secondly the development of an ad hoc performance indicator based on the Polarimetric Orientation Angle (POA) in order to better estimate the resulting speckle reduction than the standard Equivalent Number of Looks (ENL) over densely vegetated regions, like tropical forests. Being based on the ability of PolSAR measurements to retrieve ground slopes through dense vegetation, this performance indicator requires the use of low frequencies such as P-band, as well as fully polarimetric data. This study has thereby a particular interest in the context of the upcoming BIOMASS spaceborne mission whose launch is scheduled in 2023, and makes use of data from the TropiSAR airborne campaign initiated in the early stage of the mission developments. Conducted over several test sites of tropical dense forests in French Guiana, this campaign gives us the opportunity herein to exploit P-band temporal stacks with repeated time intervals transposable to BIOMASS in terms of signal decorrelation. The application of the generalized multichannel speckle filter to the Paracou test site dataset reveals the limitations of the standard ENL analytical formula to assess speckle reduction in the case of spatially correlated media like dense forests, and for this purpose the interest of the correlation between POA and azimuthal slopes computed from an independent Digital Surface Model. [ABSTRACT FROM AUTHOR]

Digital elevation models (DEMs) are widely used in geoscience. The quality of a DEM is a primary requirement for many applications and is affected during the different processing steps, from the collection of elevations to the interpolation implemented for resampling, and it is locally influenced by the landcover and the terrain slope. The quality must meet the user's requirements, which only make sense if the nominal terrain and the relevant resolution have been explicitly specified. The aim of this article is to review the main quality assessment methods, which may be separated into two approaches, namely, with or without reference data, called external and internal quality assessment, respectively. The errors and artifacts are described. The methods to detect and quantify them are reviewed and discussed. Different product levels are considered, i.e., from point cloud to grid surface model and to derived topographic features, as well as the case of global DEMs. Finally, the issue of DEM quality is considered from the producer and user perspectives. [ABSTRACT FROM AUTHOR]