Search

High temperature superconducting (HTS) cable is one of important apparatus in future smart-grid. Direct current (DC) HTS cable can provide secure and reliable transmission of electric power at the gigawatt level with several hundreds of kA and kV. Since the magnetic field of cable seriously degrades the critical current of HTS superconductor and then the current capacity, modern power converters often introduce alternating currents (AC) at other frequencies even filters reduce the magnitude of those ripple currents which resulting into ac loss since systems used to convert AC to direct current (DC) produce some current variations which are usually at frequencies of multiple power frequency. In order to reduce this loss, unlike the conventional uniform current design in AC HTS cable, a novel approach is proposed for minimizing the loss as small as possible by adjusting the inductive reactance of each layer so that the ratios of AC current amplitude to critical current are always same in layers. The magnetic field distribution and critical current are simulated by finite element method (FEM). The calculations show that the new approaches can reduce ac loss, improve efficiency, which are potential for DC current transmission HTS cable application. [ABSTRACT FROM AUTHOR]

Research of the resistance characteristics of YBCO tape under short-time DC large current impact is the foundation of the developing DC superconducting fault current limiter (SFCL) for voltage source converter-based high voltage direct current system (VSC-HVDC), which is one of the valid approaches to solve the problems of renewable energy integration. SFCL can limit DC short-circuit and enhance the interrupting capabilities of DC circuit breakers. In this paper, under short-time DC large current impacts, the resistance features of naked tape of YBCO tape are studied to find the resistance – temperature change rule and the maximum impact current. The influence of insulation for the resistance – temperature characteristics of YBCO tape is studied by comparison tests with naked tape and insulating tape in 77 K. The influence of operating temperature on the tape is also studied under subcooled liquid nitrogen condition. For the current impact security of YBCO tape, the critical current degradation and top temperature are analyzed and worked as judgment standards. The testing results is helpful for in developing SFCL in VSC-HVDC. [ABSTRACT FROM AUTHOR]

Recent years, voltage source converter-based multi-terminal high voltage DC power transmission (MTDC) is widely developed in the world. However, it is difficult for the existing DC breaker to cut off the fault transmission line with large short-circuit fault current. Then, it would be helpful to develop DC fault current limiter for the MTDC system. In this paper, DC superconducting fault current limiter (DCSFCL) is proposed to limit fault current. In order to study the resistance-time performance of the DCSFCL under the rapid change of fault current, a simulation model of Zhoushan MTDC system with DCSFCL is established, and the current-limiting performance of the DCSFCL at different location of the grid is studied. The simulation results show that DCSFCL can effectively limit short-circuit current and improve the operation reliability of MTDC system. [ABSTRACT FROM AUTHOR]

Abstract: High temperature superconducting (HTS) DC power cable shows a wide application prospect in the field of power transmission for its nearly lossless and rather high capacity. A 360m/10kA HTS DC power cable system, which connects the rectifier output of a substation with the bus bar of an electrolytic aluminium cell, will be put into operation at Henan Zhongfu Industrial Co., Ltd. As one of the items in this project, a 5m/10kA HTS DC power cable was developed, which is used to investigate the conductor design, fabrication, current-carrying capacity and stability of the 360m/10kA HTS power cable. The HTS DC power cable core consists of five conductor layers wound with spliced Bi-2223 wires with the length of 600m. The cable core has five layers and 23 conductors in each layer with the outer diameter of 45.42mm. The superconducting power cable is fabricated and tested. The critical current is about 14.3kA at 77K. The superconducting power cable is charged to 10kA with rate of 10A/s and operates at steady-state for 30min. In this paper, the 10kA HTS DC power cable design, fabrication and test are presented. The experimental research of the performance of spliced superconducting wire and charging, steady-state operating performance of the cable was carried out. [Copyright &y& Elsevier]