Search

The characteristics of the lightning shielding of large-sized transmission lines have been calculated based on an electric geometry model (EGM) proposed by Armstrong and Whitehead. However, the characteristics of lightning strokes to large-sized transmission lines observed in recent years differed from calculation results, hence the present study was conducted to improve the conventional calculation method. First, the relationship between the striking distance and the lightning current was reviewed. Specifically, the air gap discharge characteristics based on test data with complementing the large gap region were applied. In addition, the return stroke velocity distribution obtained by actual measurement was newly applied. Second, the distribution of lightning waveforms was reviewed; the distribution of peak values of lightning current with the distribution of front duration was used in this study. With these improvements, the calculated lightning stroke rate to power lines and ground wires differs less from actual observations than that calculated by the conventional method. [ABSTRACT FROM AUTHOR]

Lightning strokes to transmission lines have been estimated using the electro-geometric model proposed by Armstrong and Whitehead. The observed results of the lightning to large-scale transmission lines are reported here to validate the calculated results, in which ultra high voltage (UHV) designed transmission lines and 500 kV transmission lines were selected as the subjects of the observation. Lightning observations were carried out for direct strokes to phase conductor caused by shielding failures, as well as strokes to ground wires that have rarely been previously reported. The observed results showed that total number of direct lightning strokes to phase conductor were nearly identical to the calculated results based on the conventional method, while observed strokes to upper phase were larger and strokes to lower phase were smaller than those derived from calculations. It was also revealed that lightning strokes to ground wires of UHV designed transmission lines and 500 kV transmission lines were 5.1 times and 2.7 times larger, respectively, than calculated results based on the conventional method. [ABSTRACT FROM AUTHOR]