Search

Proton exchange membranes (PEMs) with superior characteristics are needed to advance fuel cell technology. Nafion, the most used PEM in direct methanol fuel cells (DMFCs), has excellent proton conductivity but suffers from high methanol permeability and long-term performance degradation. Thus, this study aimed to create a healable PEM with improved durability and methanol barrier properties by combining sulfonated poly(ether ether ketone) (SPEEK) and poly-vinyl alcohol (PVA). The effect of changing the N,N-dimethylacetamide (DMAc) solvent concentration during membrane casting was investigated. Lower DMAc concentrations improved water absorption and, thus, membrane proton conductivity, but methanol permeability increased correspondingly. For the best trade-off between these two characteristics, the blend membrane with a 10 wt% DMAc solvent (SP10) exhibited the highest selectivity. SP10 also showed a remarkable self-healing capacity by regaining 88% of its pre-damage methanol-blocking efficiency. The ability to self-heal decreased with the increasing solvent concentration because of the increased crosslinking density and structure compactness, which reduced chain mobility. Optimizing the solvent concentration during membrane preparation is therefore an important factor in improving membrane performance in DMFCs. With its exceptional methanol barrier and self-healing characteristics, the pioneering SPEEK/PVA blend membrane may contribute to efficient and durable fuel cell systems. [ABSTRACT FROM AUTHOR]

Self‐healing proton‐exchange membranes (PEMs) made of poly(vinyl alcohol) (PVA) and Nafion were synthesized using the freeze‐thaw method. Since PVA is more selective towards water than methanol, the blend membrane successfully reduced methanol permeability and improved selectivity compared to the recast Nafion membrane. The addition of PVA also helped the membrane self‐heal by promoting the formation of hydrogen bonds. In contrast to the pristine Nafion, which exhibited even more severe methanol crossover after being damaged than before, the Nafion‐PVA membrane underwent a self‐healing process and regained much of its methanol barrier function. These advantageous characteristics of the Nafion‐PVA membrane suggest its potential use in direct methanol fuel cells (DMFCs). [ABSTRACT FROM AUTHOR]

Getting the direct methanol fuel cell (DMFC) closer to mass production requires the creation of a high-performance and long-lasting proton exchange membrane (PEM). In this study, self-healable PEMs, Nafion-poly(vinyl alcohol)/phosphotungstic acid (N-PVA/HPW), were prepared through a simple freezing–thawing method. HPW acted as proton conductors, while PVA with reversible hydrogen bonds contributed to the self-repair ability of the membrane. The proton conductivity of the N-PVA/HPW membranes was found to be comparable to that of the pristine Nafion membrane owing to the additional proton-conducting sites and improved water retention provided by the HPW. Along with this, the packed structure of the mixed-matrix membranes led to a lower methanol permeability in all the N-PVA/HPW membranes compared to recast Nafion. As a result, N-PVA/HPW20 membrane with acceptable proton conductivity (0.062 S cm−1) and reduced methanol permeability (2.75 × 10−6 cm2 s−1) achieved the highest selectivity, where selectivity is a well-known indicator of a membrane's suitability for use in DMFC. The N-PVA/HPW20 membrane successfully recorded a peak power density of 2.7 mW cm−2, which is 10.7% higher than the value of recast Nafion. Another highlight of these mixed-matrix membranes is their ability to recover up to 93% of their initial methanol barrier properties after being damaged. This fascinating self-healing property of the membrane is believed to have the potential to extend the service life of DMFC. [ABSTRACT FROM AUTHOR]

Nafion based proton exchange membrane (PEM) has long been used as conventional PEM in direct methanol fuel cell (DMFC) industry. However, the high cost of Nafion membrane and other drawbacks like high methanol crossover hinder the advancement of this industry. This study aims to develop a low cost membrane using sulfonated poly ether ether ketone (SPEEK) polymer. Silica and silicotungstic acid (SiWA) were incorporated into the membrane matrix using solution casting method. The optimum loading of the additives was tuned and it is discovered that the SPEEK membrane containing 10 wt% of silica and 5 wt% of SiWA has the best performance due to its high proton conductivity and moderately low methanol permeability. The performance of the membrane can further be enhanced by adding (3-aminopropyl)triethoxysilane (APTES) and carbonyldiimidazole (CDI) as coupling agents. Inclusion of APTES and CDI in SPEEK could not only improve the compatibility between organic SPEEK and inorganic additives, but also improve the homogeneity and dispersity of the additives. As a result, the resultant membrane with a better dimensional stability achieves high selectivity (10.60 × 104 S.s/cm3) up to 6.5 times more than pristine SPEEK membrane and 1.3 times higher than the commercial Nafion 117 membrane. • SPEEK/SiO 2 -SiWA was produced with APTES as coupling agent and CDI as promoter. • SPEEK1-AC achieved selectivity of 6.5 times higher than pristine SPEEK. • Silica-supported SiWA increased the proton conductivity of SPEEK membrane. • Improvement in homogeneity between organic SPEEK and inorganic additives. [ABSTRACT FROM AUTHOR]

Nafion, a perfluorosulfonic acid polymer, has been the standard membrane material for direct methanol fuel cells (DMFCs) due to its proton-carrying capabilities, despite its shortcomings as a methanol barrier. To attain self-healing and methanol-blocking properties, the incorporation of poly(vinyl alcohol) (PVA) polymer into Nafion was pursued. However, this strategy resulted in low proton conductivity. Thus, acid functional groups were added to a secondary modifier to boost proton conductivity. In this work, sulfonated graphene oxide (SGO) was assembled with Nafion and PVA through a simple freezing-thawing method to demonstrate a self-healable proton exchange membrane (PEM) without compromising the proton conductivity of Nafion. The synergistic effect of SGO in methanol-blocking and proton transport successfully strode over recast Nafion by hampering 33.2 % of methanol permeation and increasing 19.5 % of proton conductivity. As a result, the selectivity of the best hybrid PEM (N/PVA/SGO1.0) was increased by 1.8 times in comparison to recast Nafion. A single cell passive DMFC made using the novel hybrid membrane exhibited a power density of 6.07 mW cm−2 at a current density of 26.48 mA cm−2, and an open circuit voltage of 0.55 V at room temperature using 4 M methanol. This performance was essentially higher than that achieved by recast Nafion and commercial Nafion 117. The N/PVA/SGO1.0 hybrid membrane also showed remarkable self-healing properties, with 89 % recovery of methanol blocking function through reversible hydrogen bonding, illustrating its tremendous sustainable potential for use in DMFCs. [Display omitted] • Freeze-thaw process induces reversible physical crosslinking in N/PVA/SGO. • N/PVA/SGO achieves 28 % better DMFC performance than N117. • N/PVA/SGO demonstrates multiple times of self-healing. [ABSTRACT FROM AUTHOR]