Search

Nonthermal disinfection technologies are gaining increasing interest in the field of minimally processed food in order to improve the microbial safety or to extend the shelf life. Especially fresh-cut produce or meat and fish products are vulnerable to microbial spoilage, but, due to their sensitivity, they require gentle preservation measures. The application of intense light pulses of a broad spectral range comprising ultraviolet, visible and near infrared irradiation is currently investigated as a potentially suitable technology to reduce microbial loads on different food surfaces or in beverages. Considerable research has been performed within the last two decades, in which the impact of various process parameters or microbial responses as well as the suitability of pulsed light (PL) for food applications has been examined. This review summarizes the outcome of the latest studies dealing with the treatment of various foods including the impact of PL on food properties as well as recent findings about the microbicidal action and relevant process parameters. [ABSTRACT FROM AUTHOR]

Aims: To investigate the microbial inactivation efficiency of a newly developed cascaded dielectric barrier discharge (CDBD) set-up against various micro-organisms on polyethylene terephthalate (PET) foils. Methods and Results: Inactivation kinetics in dependency of time were produced with air as process gas and test strains like Salmonella serotype Mons, Staphylococcus aureus and Escherichia coli and spores of Bacillus atrophaeus, Aspergillus niger and Clostridium botulinum, which were homogeneously distributed on the sample surface by a spray method. Highest count reduction was observed for the vegetative cells with at least 6·6 log10 within 1 s. Aspergillus niger was the most resistant test strain with an inactivation rate of about 5 log10 in 5 s. Conclusions: For industrial applications it is necessary to evaluate new sterilization methods against a broad range of different micro-organisms. Significance and Impact of the Study: CDBD plasma is a fast and effective technology for decontamination of heat sensitive materials in few seconds. [ABSTRACT FROM AUTHOR]

The impact of the fluence regulation on the inactivation efficiency of pulsed light (PL) surface disinfection treatments was investigated. E. coli and L. innocua were exposed to PL on a gel surface under variation of the applied voltage, the number of light flashes as well as the distance between the flash lamp and the sample surface. The results revealed deviations from the reciprocity law when the total fluence striking the sample surface was not applied at once, but subdivided into several successive light flashes. No differences were found when the fluence was delivered with only single light flashes, irrespective of the applied voltage. The pulse frequency did not have an impact on the microbial reduction within 1–5 Hz. Furthermore, the sensitivities of various bacterial strains, endospores and conidiospores were compared. Differences occurred for vegetative bacteria without a clear pattern, while bacterial endospores were more resistant. Dark pigmented mold spores were slightly more resistant than bacterial endospores. All dose-response curves exhibited a downward concavity, except for P. aeruginosa . Industrial relevance This study shows that the inactivation of bacteria on e.g. food surfaces by pulsed light systems depends on the way of fluence dosage. While it is irrelevant whether the fluence is regulated by the discharge voltage or the distance between the flash lamp and the treated surface, it is more effective to apply only single light flashes of high fluence instead of several consecutive light flashes. There is furthermore no distinct trend regarding the sensitivity of bacteria to PL, variations occur on species and strain level. Bacterial spores are in general more resistant while pigmented conidiospores show a slightly higher resistance than bacterial endospores. [ABSTRACT FROM AUTHOR]