Search

The share of inverter-connected renewable energy resources (RESs) is increasing in the grid, with these resources partially displacing conventional synchronous generators. This has resulted in increased variability of active power supply, reduced overall inertia, and increased spatial heterogeneity of inertia, leading to faster system frequency dynamics along with larger and more frequent frequency control events. These effects are expected to become increasingly more important in power system control in next-generation grids, which may conceivably be made up entirely of RESs. To mitigate these challenges, a fast, area-based hierarchical control strategy is proposed. This scheme partitions the power system into small areas, estimates local power imbalances, and corrects them by utilizing local inverter-based resources (IBRs). In cases where sufficient resources are not available locally, power is preferentially sourced from electrically close neighbours using an iterative distributed optimization scheme which preserves information privacy between areas. The proposed frequency control architecture can be retrofit onto existing control systems, and allows for flexibility in the amount of model information available to the designer. The control strategy is validated on two detailed multi-area power system models. Simulation results show that the strategy provides fast and localized frequency control. [ABSTRACT FROM AUTHOR]

Secondary control strategies in hybrid ac/dc microgrids have been conventionally designed independently for each side of the microgrid, neglecting the interaction between the ac and dc sides due to the power transferred through the interlinking converter. This has a negative effect on the power sharing and dynamic response of the system. In this article, a novel distributed secondary control strategy for hybrid ac/dc-microgrids is presented which coordinates the control actions of the ac and dc sides. The proposed control scheme simultaneously regulates ac-voltage magnitude and frequency, as well as the dc-voltage magnitude, by including the interlinking converters in the control strategy via a distributed consensus approach. This improves the power-sharing accuracy and secondary control restoration of the variables in both ac and dc sides of the microgrid. Moreover, the proposed methodology avoids the circulating currents which are typically produced in systems with multiple interlinking converters. Several simulation and experimental tests, such as load impacts and plug-and-play capability, are presented to validate the performance of the proposed control strategy using a 24-kW hybrid ac/dc-microgrid laboratory prototype. [ABSTRACT FROM AUTHOR]

Communication infrastructure (CI) in microgrids (MGs) allows for the application of different control architectures for the secondary control (SC) layer. The use of new SC architectures involving CI is motivated by the need to increase MG resilience and handle the intermittent nature of distributed generation units. The structure of SC is classified into three main categories, including centralized SC (CSC) with a CI, distributed SC (DISC) generally with a low-data-rate CI, and decentralized SC (DESC) with communication-free infrastructure. To meet the MGs’ operational constraints and optimize performance, control and communication must be utilized simultaneously in different control layers. In this survey, we review and classify all types of SC policies from CI-based methods to communication-free policies, including CSC, averaging-based DISC, consensus-based DISC methods, containment pinning consensus, event-triggered DISC, washout-filter-based DESC, and state-estimation-based DESC. Each structure is scrutinized from the viewpoint of the relevant literature. Challenges such as clock drifts, cyber-security threats, and the advantage of event-triggered approaches are presented. Fully decentralized approaches based on state-estimation and observation methods are also addressed. Although these approaches eliminate the need of any CI for the voltage and frequency restoration, during black start process or other functionalities related to the tertiary layer, a CI is required. Power hardware-in-the-loop experimental tests are carried out to compare the merits and applicability of different SC structures. [ABSTRACT FROM AUTHOR]

This paper presents a novel distributed control strategy for frequency control, congestion management, and optimal dispatch (OD) in isolated microgrids. The proposed strategy drives the distributed generators (DGs) within the microgrid to a dispatch that complies with the Karush–Kuhn–Tucker (KKT) conditions of a linear optimal power flow (OPF) formulation. The controller relies on local power and frequency measurements, information from neighboring DGs, and line-flow measurements transmitted through a communications network. Extensive simulations show a good performance of the controller against sudden changes in the load, congested lines and availability of DGs in the microgrid, and the ability to successfully drive the system to an optimal economic operation. [ABSTRACT FROM AUTHOR]

In this paper, we present new distributed controllers for secondary frequency and voltage control in islanded microgrids. Inspired by techniques from cooperative control, the proposed controllers use localized information and nearest-neighbor communication to collectively perform secondary control actions. The frequency controller rapidly regulates the microgrid frequency to its nominal value while maintaining active power sharing among the distributed generators. Tuning of the voltage controller provides a simple and intuitive tradeoff between the conflicting goals of voltage regulation and reactive power sharing. Our designs require no knowledge of the microgrid topology, impedances, or loads. The distributed architecture allows for flexibility and redundancy, eliminating the need for a central microgrid controller. We provide a voltage stability analysis and present extensive experimental results validating our designs, verifying robust performance under communication failure and during plug-and-play operation. [ABSTRACT FROM PUBLISHER]

Abstract: Motivated by the recent and growing interest in smart grid technology, we study the operation of DC/AC inverters in an inductive microgrid. We show that a network of loads and DC/AC inverters equipped with power-frequency droop controllers can be cast as a Kuramoto model of phase-coupled oscillators. This novel description, together with results from the theory of coupled oscillators, allows us to characterize the behavior of the network of inverters and loads. Specifically, we provide a necessary and sufficient condition for the existence of a synchronized solution that is unique and locally exponentially stable. We present a selection of controller gains leading to a desirable sharing of power among the inverters, and specify the set of loads which can be serviced without violating given actuation constraints. Moreover, we propose a distributed integral controller based on averaging algorithms, which dynamically regulates the system frequency in the presence of a time-varying load. Remarkably, this distributed-averaging integral controller has the additional property that it preserves the power sharing properties of the primary droop controller. Our results hold for any acyclic network topology, and hold without assumptions on identical line admittances or voltage magnitudes. [Copyright &y& Elsevier]