Search

For the past few years, the world has seen a great shift toward renewable energy resources from conventional ones. But the ever‐increasing integration of distributed generation (DG) to the electrical network leads to integration limiting constraints like overvoltage, under voltage, harmonics, equipment ampacity violations, and failure of protection schemes. Therefore, an extensive investigation of the methodologies in which DGs can be incorporated into the electrical network is presented in this manuscript. This article provides an extensive review of all the hosting capacity (HC) terms, references, limiting constraints of the studied networks, geographical segregation, and their determination methodologies. Moreover, the factors defining the HCs of various networks and the architectures employed to increase them, are also explained briefly in the conducted review study. [ABSTRACT FROM AUTHOR]

Highlights • A method is proposed to calculate the optimal oversize of the DG inverters. • The reactive power capability and active power curtailment are considered. • Different control schemes of the inverter are considered in the proposed method. • The effect of OLTC operation on the total costs and inverter oversize is studied. • IEEE 69-bus and IEEE 33-bus distribution systems are used for simulation. Abstract The penetration of renewable distributed generations (DG) is recently being increased in distribution systems. Due to the intermittent nature of these generation units, several technical problems are expected based on the environmental conditions and load profiles, such as voltage rise and increasing losses. A traditional way to alleviate these technical problems is to oversize their interfacing inverters for releasing their capacities to inject/absorb further reactive power. In the literature, the DG inverter is normally oversized by a certain percentage (e.g., 10%) for this purpose. In turn, an optimization-based method is proposed in this paper to calculate the optimal oversize of the interfaced inverter employed in various utility-owned DG types to regulate voltages and to reduce losses with minimum total costs. The proposed method considers the active power curtailment (APC) feature in the DG inverter and the transformer taps. Different control schemes of the interfaced inverter are considered and incorporated in the proposed optimization model. The simulation results demonstrate the effectiveness of the proposed method compared with existing methods. [ABSTRACT FROM AUTHOR]