Search

DNA-intercalated motifs (iMs) are facile scaffolds for the design of various pH-responsive nanomachines, including biocompatible pH sensors. First, DNA pH sensors relied on complex intermolecular scaffolds. Here, we used a simple unimolecular dual-labeled iM scaffold and minimized it by replacing the redundant loop nucleosides with abasic or alkyl linkers. These modifications improved the thermal stability of the iM and increased the rates of its pH-induced conformational transitions. The best effects were obtained upon the replacement of all three native loops with short and flexible linkers, such as the propyl one. The resulting sensor showed a pH transition value equal to 6.9 ± 0.1 and responded rapidly to minor acidification (tau 1/2 <1 s for 7.2 → 6.6 pH jump). We demonstrated the applicability of this sensor for pH measurements in the nuclei of human lung adenocarcinoma cells (pH = 7.4 ± 0.2) and immortalized embryonic kidney cells (pH = 7.0 ± 0.2). The sensor stained diffusely the nucleoplasm and piled up in interchromatin granules. These findings highlight the prospects of iMs in the studies of normal and pathological pH-dependent processes in the nucleus, including the formation of biomolecular condensates.

The lack of high throughput screening (HTS) techniques for small molecules that stabilize DNA iMs limits their development as perspective drug candidates. Here we showed that fluorescence monitoring for probing the effects of ligands on the iM stability using the FAM-BHQ1 pair provides incorrect results due to additional dye-related interactions. We developed an alternative system with fluorescent phenoxazine pseudonucleotides in loops that do not alter iM unfolding. At the same time, the fluorescence of phenoxazine residues is sensitive to iM unfolding that enables accurate evaluation of ligand-induced changes of iM stability. Our results provide the basis for new approaches for HTS of iM ligands.

The artificial nucleobase 7,8-dihydro-8-oxo-1,N 6 -ethenoadenine (X) was investigated with respect to its ability to engage in Ag(I)-mediated base pairing in DNA. Spectroscopic data indicate the formation of dinuclear X-Ag(I) 2 -X homo base pairs and mononuclear X-Ag(I)-C base pairs (C, cytosine). Density functional theory calculations and molecular dynamics simulations indicate that the nucleobase changes from its lactam tautomeric form prior to the formation of the Ag(I)-mediated base pair to the lactim form after the incorporation of the Ag(I) ions. Fluorescence spectroscopy indicates that the two Ag(I) ions of the homo base pair are incorporated sequentially. Isothermal titration calorimetry confirms that the affinity of one of the Ag(I) ions is about tenfold higher than that of the other Ag(I) ion. The computational analysis by means of density functional theory confirms a much larger reaction energy for the incorporation of the first Ag(I) ion. The thermal stabilization upon the formation of the dinuclear Ag(I)-mediated homo base pair exceeds the one previously observed for the closely related nucleobase 1,N 6 -ethenoadenine by far, despite very similar structures. This additional stabilization may stem from the presence of water molecules engaged in hydrogen bonding with the additional oxygen atom of the artificial nucleobase X. The highly stabilizing Ag(I)-mediated base pair is a valuable addition to established dinuclear metal-mediated base pairs., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Remote control of cells and single molecules by magnetic nanoparticles in nonheating external magnetic fields is a perspective approach for many applications such as cancer treatment and enzyme activity regulation. However, the possibility and mechanisms of direct effects of small individual magnetic nanoparticles on such processes in magneto-mechanical experiments still remain unclear. In this work, we have shown remote-controlled mechanical dissociation of short DNA duplexes (18-60 bp) under the influence of nonheating low-frequency alternating magnetic fields using individual 11 nm magnetic nanoparticles. The developed technique allows (1) simultaneous manipulation of millions of individual DNA molecules and (2) evaluation of energies of intermolecular interactions in short DNA duplexes or in other molecules. Finally, we have shown that DNA duplexes dissociation is mediated by mechanical stress and produced by the movement of magnetic nanoparticles in magnetic fields, but not by local overheating. The presented technique opens a new avenue for high-precision manipulation of DNA and generation of biosensors for quantification of energies of intermolecular interaction.

1,3-Diaza-2-oxophenoxazine (X) has been introduced as a ligand in silver(I)-mediated base pairing in a parallel DNA duplex. This fluorescent cytosine analog is capable of forming stabilizing X-Ag(I)-X and X-Ag(I)-C base pairs in DNA duplexes, as confirmed by temperature-dependent UV spectroscopy and luminescence spectroscopy. DFT calculations of the silver(I)-mediated base pairs suggest the presence of a synergistic hydrogen bond. Molecular dynamics (MD) simulations of entire DNA duplexes nicely underline the geometrical flexibility of these base pairs, with the synergistic hydrogen bond facing either the major or the minor groove. Upon silver(I) binding to the X:X or X:C base pairs, the luminescence emission maximum experiences a red shift from 448 to 460 nm upon excitation at 370 nm. Importantly, the luminescence of the 1,3-diaza-2-oxophenoxazine ligand is not quenched significantly upon binding a silver(I) ion. In fact, the luminescence intensity even increases upon formation of a X-Ag(I)-C base pair, which is expected to be beneficial for the development of biosensors. As a consequence, the silver(I)-mediated phenoxazinone base pairs represent the first strongly fluorescent metal-mediated base pairs.

Non-canonical DNA structures are widely used for regulation of gene expression, in DNA nanotechnology and for the development of new DNA-based sensors. I-motifs (iMs) are two intercalated parallel duplexes that are held together by hemiprotonated C-C base pairs. Previously, iMs were used as an accurate sensor for intracellular pH measurements. However, iM stability is moderate, which in turn limits its in vivo applications. Here, we report the rational design of a new substituted phenoxazine 2'-deoxynucleotide (i-clamp) for iM stabilization. This residue contains a C8-aminopropyl tether that interacts with the phosphate group within the neighboring chain without compromising base pairing. We studied the influence of i-clamp on pH-dependent stability for intra- and intermolecular iM structures and found the optimal positions for modification. Two i-clamps on opposite strands provide thermal stabilization up to 10-11°C at a pH of 5.8. Thus, we developed a new modification that shows significant iM-stabilizing effect both at strongly and mildly acidic pH and increases iM transition pH values. i-Clamp can be used for tuning iM-based pH probes or assembling extra stable iM structures for various applications.

A novel method for regulating the activity of homodimeric proteins--"molecular gate" approach--was proposed and its usefulness illustrated for the type II restriction endonuclease SsoII (R.SsoII) as a model. The "molecular gate" approach is based on the modification of R.SsoII with azobenzene derivatives, which allows regulating DNA binding and cleavage via illumination with light. R.SsoII variants with single cysteine residues introduced at selected positions were obtained and modified with maleimidoazobenzene derivatives. A twofold change in the enzymatic activity after illumination with light of wavelengths of 365 and 470 nm, respectively, was demonstrated when one or two molecules of azobenzene derivatives were attached to the R.SsoII at the entrance of or within the DNA-binding site.

We developed a metal ion chelate-assisted ligation for SNP detection by microarray. An oligonucleotide probe was separated into two 9-10-mers bearing iminodiacetic residues at the gap point. Duplex formation with the DNA target was possible only if nickel ions were added, but a nucleotide substitution opposite the gap point prevented duplex formation. Here we demonstrate the application of this approach for SNP detection (A1298C) within the 5,10-methylenetetrahydrofolate reductase gene on a microarray.

Covalent protein capture (cross-linking) by reactive DNA derivatives makes it possible to investigate structural features by fixing complexes at different stages of DNA–protein recognition. The most common cross-linking methods are based on reactive groups that interact with native or engineered cysteine residues. Nonetheless, high reactivity of most of such groups leads to preferential fixation of early-stage complexes or even non-selective cross-linking. We synthesised a set of DNA reagents carrying an acrylamide group attached to the C5 atom of a 2′-deoxyuridine moiety via various linkers and studied cross-linking with MutS as a model protein. MutS scans DNA for mismatches and damaged nucleobases and can form multiple non-specific complexes with DNA that may cause non-selective cross-linking. By varying the length of the linker between DNA and the acrylamide group and by changing the distance between the reactive nucleotide and a mismatch in the duplex, we showed that cross-linking occurs only if the distance between the acrylamide group and cysteine is optimal within the DNA–protein complex. Thus, acrylamide-modified DNA duplexes are excellent tools for studying DNA–protein interactions because of high selectivity of cysteine trapping. [ABSTRACT FROM AUTHOR]

Dye labeled oligonucleotides have been applied to detection of DNA with high sensitivity using surface enhanced Raman spectroscopy (SERS). Duplex formation of dye labelled oligonucleotides with DNA targets, followed by selective conjugation with silver nanoparticles, made it possible to determine the optimal distance between the SERS label and the silver surface, which was necessary for strong signal enhancement. For all Rh6G labeled oligonucleotides the limits of detection were 3 fmol dm–3, while for Cy3 labeled oligonucleotides the signal enhancement depended on the distance between Cy3 dye and silver nanoparticles. [ABSTRACT FROM AUTHOR]

Nicking endonucleases (NEases) selectively cleave single DNA strands in double-stranded DNAs at a specific site. They are widely used in bioanalytical applications and in genome editing; however, the peculiarities of DNA–protein interactions for most of them are still poorly studied. Previously, it has been shown that the large subunit of heterodimeric restriction endonuclease BspD6I (Nt.BstD6I) acts as a NEase. Here we present a study of interaction of restriction endonuclease BspD6I with modified DNA containing single non-nucleotide insertion with an azobenzene moiety in the enzyme cleavage sites or in positions of sugar-phosphate backbone nearby. According to these data, we designed a number of effective stimulus-responsive oligonucleotide inhibitors bearing azobenzene or triethylene glycol residues. These modified oligonucleotides modulated the functional activity of Nt.BspD6I after cooling or heating. We were able to block the cleavage of T7 phage DNA by this enzyme in the presence of such inhibitors at 20–25°C, whereas the Nt.BspD6I ability to hydrolyze DNA was completely restored after heating to 45°C. The observed effects can serve as a basis for the development of a platform for regulation of NEase activity in vitro or in vivo by external signals. [ABSTRACT FROM AUTHOR]

We propose catalytically synthesized nanozymes based on Prussian Blue (PB) and azidomethyl-substituted poly (3,4-ethylenedioxythiophene) (azidomethyl-PEDOT) as novel electrocatalytic labels for DNA/RNA sensors. Catalytic approach allowed to synthesize highly redox and electrocatalytically active Prussian Blue nanoparticles functionalized with azide groups that enable 'click' conjugation with alkyne-modified oligonucleotides. Both competitive and sandwich-type schemes were realized. As the sensor response the direct (mediator-free) electrocatalytic current of H 2 O 2 reduction can be measured, which is proportional to the concentration of the hybridized labeled sequences. The current of H 2 O 2 electrocatalytic reduction is only 3–8 times increased in the presence of the freely diffusing mediator catechol, which indicates high efficiency of direct electrocatalysis with the elaborated labels. Electrocatalytic amplification of the signal allows robust detection of (63–70)-base target sequences with concentrations below 0.2 nM in blood serum within an hour. We believe, the use of advanced Prussian Blue based electrocatalytic labels sets new avenues for point-of-care DNA/RNA sensing. [Display omitted] • Catalytically synthesized functionalized nanozymes possess high catalytic activity. • Nanozyme functionalization with azide groups enables 'click' conjugation. • Efficient direct electrocatalysis with the labels provides mediator-free operation. • Electrocatalytic signal amplification allows detecting down to 0.01 nM of DNA. [ABSTRACT FROM AUTHOR]

Branching points in DNA nanostructures are usually 3- or 4-way junctions maintained by Watson-Crick non-covalent interactions. However, covalently bound DNA stars could improve the diversity, strength and integrity of DNA nanoscale constructions. We report here the convenient synthesis of 3- and 4-fold pentaerythritol-based azides and their use for the assembly of branched conjugates containing the same or different oligonucleotides (ODNs) and/or fluorescent dyes by stoichiometry controlled copper (I) catalyzed azide alkyne cycloaddition (CuAAC) functionalization. [ABSTRACT FROM AUTHOR]

We report the design of robust sensors for measuring intracellular pH, based on the native DNA i-motifs (iMs) found in neurodegeneration- or carcinogenesis-related genes. Those iMs appear to be genomic regulatory elements and might modulate transcription in response to pH stimuli. Given their intrinsic sensitivity to minor pH changes within the physiological range, such noncanonical DNA structures can be used as sensor core elements without additional modules other than fluorescent labels or quenchers. We focused on several iMs that exhibited fast folding/unfolding kinetics. Using stopped-flow techniques and FRET-melting/annealing assays, we confirmed that the rates of temperature-driven iM-ssDNA transitions correlate with the rates of the pH-driven transitions. Thus, we propose FRET-based hysteresis analysis as an express method for selecting sensors with desired kinetic characteristics. For the leading fast-response sensor, we optimized the labelling scheme and performed intracellular calibration. Unlike the commonly used small-molecule pH indicators, that sensor was transferred efficiently to cell nuclei. Considering its favourable kinetic characteristics, the sensor can be used for monitoring proton dynamics in the nucleus. These results argue that the 'genome-inspired' design is a productive approach to the development of biocompatible molecular tools. • A novel 'genome-inspired' approach for designing pH sensors was probed. • A robust method for selecting 'fast' sensors based on melting assays was proposed. • New sensors were obtained using selected genomic i-motifs and fluorescent labels. • The lead sensor detected rapid and slight pH changes within the physiological range. • The sensor is useable for pH imaging in living cells and localizes in cell nuclei. [ABSTRACT FROM AUTHOR]