Search

The purpose of this study is to develop and evaluate a self-nanoemulsifying drug delivery system (SNEDDS) to improve the oral absorption of poorly water-soluble enzalutamide (ENZ). Considering the rapid recrystallization of the drug, based on solubility and crystallization tests in various oils, surfactants and co-surfactants, Labrafac PG 10%, Solutol HS15 80%, and Transcutol P 10%, which showed the most stable particle size and polydispersity index (PDI) without drug precipitation, were selected as the optimal SNEDDS formulation. The optimized SNEDDS formulation showed excellent dissolution profiles for all the drugs released at 10 min of dissolution due to the increased surface area with a small particle size of approximately 16 nm. Additionally, it was confirmed to be stable without significant differences in physical and chemical properties for 6 months under accelerated conditions (40 ± 2 °C, 75 ± 5% RH) and stressed conditions (60 ± 2 °C). Associated with the high dissolutions of ENZ, pharmacokinetic parameters were also greatly improved. Specifically, the AUC was 1.9 times higher and the C max was 1.8 times higher than those of commercial products (Xtandi ® soft capsule), resulting in improved oral absorption. Taken together with the results mentioned above, the SNEDDS could be an effective tool as a formulation for ENZ and other similar drugs.

Purpose: The objective of this study was to exploit a novel methotrexate (MTX)-loaded solid self-microemulsifying drug delivery system (SMEDDS) with enhanced bioavailability and photostability. Materials and methods: The optimized liquid SMEDDS was composed of castor oil, Tween ® 80, and Plurol ® diisostearique at a voluminous ratio of 27:63:10. The solid SMEDDS was formulated by spray drying liquid SMEDDS with the solid carrier (calcium silicate). Particle size analyzer, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared (FTIR) spectroscopy experiments characterized the physiochemical properties of the MTX-loaded solid SMEDDS. These properties include a z-average diameter of emulsion around 127 nm and the amorphous form of the solid SMEDDS. Furthermore, their solubility, dissolution, and pharmacokinetics in Sprague-Dawley rats were analyzed in comparison with the MTX powder. Results: The final dissolution rate and required time for complete release of solid SMEDDS were 1.9-fold higher and 10 min shorter, respectively, than those of MTX powder. Pharmacokinetic analysis demonstrated 2.04- and 3.41-fold increments in AUC and Cmax, respectively in comparison to MTX powder. The AUC and C max were significantly increased in solid SMEDDS. Finally, the photostability studies revealed the substantially enhanced photostability of the MTX-loaded SMEDDS under the forced degradation and confirmatory conditions. Conclusion: This solid SMEDDS formulation could be an outstanding candidate for improving the oral bioavailability and photostability of MTX., Competing Interests: The authors report no conflicts of interest in this work.

To develop a novel celecoxib (CXB)-loaded drug delivery system, numerous nanosuspensions were prepared with various polymers and surfactants using a wet media milling process, and their particle sizes were subsequently determined. A 24 full factorial design was used to identify the most appropriate preparation conditions. Pharmacokinetics of the selected nanosuspension were performed in rats and compared with those of a drug powder and a commercial CXB-loaded product. Among the carriers investigated, copovidone and sodium lauryl sulphate gave the smallest particle size of the drug in the nanosuspension. In particular, the nanosuspension prepared with 5% CXB, 4% copovidone, and 0.1% sodium lauryl sulphate, under the appropriate conditions, showed a particle size of approximately 190 nm, which was physically stable for at least 8 weeks. This nanosuspension provided a significantly higher plasma concentration and AUC in rats as compared with the drug powder and the commercial product. Thus, this novel CXB-loaded nanosuspension is a promising candidate with excellent stability and enhanced oral bioavailability.

In the past decade, the self-immolative biodegradable polymer arose as a novel paradigm for its efficient degradation mechanism and vast potential for advanced biomedical applications. This study reports successful synthesis of a novel biodegradable polymer capable of self-immolative backbone cleavage. The monomer is designed by covalent conjugations of both pendant redox-trigger (p-nitrobenzyl alcohol) and self-immolative linker (p-hydroxybenzyl alcohol) to the cyclization spacer (n-2-(hydroxyethyl)ethylene diamine), which serves as the structural backbone. The polymerization of the monomer with hexamethylene diisocyanate yields a linear redox-sensitive polymer that can systemically degrade via sequential 1,6-elimination and 1,5-cyclization reactions within an effective timeframe. Ultimately, the polymer's potential for biomedical application is simulated through in vitro redox-triggered release of paclitaxel from polymeric nanoparticles., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The purpose of this study was to develop a novel dabigatran etexilate hemisuccinate (DEH) salt-loaded polycap with bioequivalence to the dabigatran etexilate mesylate (DEM)-loaded commercial product. DEH prepared with dabigatran etexilate base (DE) and succinic acid was less hygroscopic but less soluble than DEM. Numerous micronized DEHs and DEH-loaded solid dispersions were prepared employing the spiral jet-milling and spray-drying techniques, respectively. Among the formulations prepared, a micronized DEH prepared with the injection air at 1.5bar and the grinding air at 2bar, and a DEH-loaded solid dispersion prepared with 6g HPMC most improved the drug solubility, respectively. Moreover, the micronized DEH provided more increased drug solubility and dissolution compared with the solid dispersion, even though its drug solubility was still lower than that of DEM. Unlike the situation in other studies, the enhanced solubility and dissolution of DEH was more due to particle size reduction than to a change to the amorphous form. The micronized DEH prepared with Myrj 52S had greater drug solubility than preparations with other surfactants. Among the organic acids investigated, only fumaric acid (128.8mg) showed a similar pattern in pH changes to the DEM-loaded commercial product. Furthermore, in order to make the environment acidic while preventing the direct contact of the drug with fumaric acid, the polycap was composed of a tablet containing the micronized DEH, Myrj 52S and other ingredients, and separate fumaric acid. This micronized DEH-loaded polycap was dissolution- and bio-equivalent to the DEM-loaded commercial product in beagle dogs. Thus, the novel micronized DEH-loaded polycap would be a promising alternative to the DEM-loaded commercial product., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Purpose: The purpose of the present research was to develop a novel electrosprayed nanospherule providing the most optimized aqueous solubility and oral bioavailability for poorly water-soluble fenofibrate., Methods: Numerous fenofibrate-loaded electrosprayed nanospherules were prepared with polyvinylpyrrolidone (PVP) and Labrafil(®) M 2125 as carriers using the electrospray technique, and the effect of the carriers on drug solubility and solvation was assessed. The solid state characterization of an optimized formulation was conducted by scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopic analyses. Oral bioavailability in rats was also evaluated for the formulation of an optimized nanospherule in comparison with free drug and a conventional fenofibrate-loaded solid dispersion., Results: All of the electrosprayed nanospherule formulations had remarkably enhanced aqueous solubility and dissolution compared with free drug. Moreover, Labrafil M 2125, a surfactant, had a positive influence on the solubility and dissolution of the drug in the electrosprayed nanospherule. Increases were observed as the PVP/drug ratio increased to 4:1, but higher ratios gave no significant increases. In particular, an electrosprayed nanospherule composed of fenofibrate, PVP, and Labrafil M 2125 at the weight ratio of 1:4:0.5 resulted in a particle size of <200 nm with the drug present in the amorphous state. It demonstrated the highest solubility (32.51±2.41 μg/mL), an excellent dissolution (~85% in 10 minutes), and an oral bioavailability ~2.5-fold better than that of the free drug. It showed similar oral bioavailability compared to the conventional solid dispersion., Conclusion: Electrosprayed nanospherules, which provide improved solubility and bioavailability, are promising drug delivery tools for oral administration of poorly water-soluble fenofibrate.

Enzalutamide (ENZ), marketed under the brand name Xtandi® as a soft capsule, is an androgen receptor signaling inhibitor drug actively used in clinical settings for treating prostate cancer. However, ENZ's low solubility and bioavailability significantly hinder the achievement of optimal therapeutic outcomes. In previous studies, a liquid self-nanoemulsifying drug delivery system (L-SNEDDS) containing ENZ was developed among various solubilization technologies. However, powder formulations that included colloidal silica rapidly formed crystal nuclei in aqueous solutions, leading to a significant decrease in dissolution. Consequently, this study evaluated the efficacy of adding a polymer as a recrystallization inhibitor to a solid SNEDDS (S-SNEDDS) to maintain the drug in a stable, amorphous state in aqueous environments. Polymers were selected based on solubility tests, and the S-SNEDDS formulation was successfully produced via spray drying. The optimized S-SNEDDS formulation demonstrated through X-ray diffraction and differential scanning calorimetry data that it significantly reduced drug crystallinity and enhanced its dissolution rate in simulated gastric and intestinal fluid conditions. In an in vivo study, the bioavailability of orally administered formulations was increased compared to the free drug. Our results highlight the effectiveness of solid-SNEDDS formulations in enhancing the bioavailability of ENZ and outline the potential translational directions for oral drug development. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop a novel fluticasone propionate (FP) and salmeterol xinafoate (SX)-loaded dry powder inhaler (DPI) system, which was composed of powder formulation and performance. The air flow resistances were determined with various types of DPI device, showing that the modified RS01 device gave the specific resistance similar to the commercial DPI device. The particle properties of FP, SX, and inhalation grade lactose particles, such as particle size, size distribution, and fine content, were assessed. Subsequently, the aerodynamic behaviors of the DPI powder formulations were evaluated by thein vitrodeposition of drugs in the DPI products using Andersen cascade impactor. Amongst the DPI powder formulations tested, the formulation composed of FP, SX, Respitose®SV003, Respitose®SV010, and Respitose®ML006 at the weight ratio of 0.5/0.145/19/19/2 gave depositions, emitted dose, fine particle dose, fine particle fraction, and mass median aerodynamic diameter of drugs similar to the commercial product, suggesting that they had similar aerodynamic behaviors. Furthermore, it gave excellent content uniformity. Thus, this DPI using the modified RS01 device would be recommended as a candidate for FP and SX-loaded pharmaceutical DPI products. [ABSTRACT FROM AUTHOR]

To develop a novel solid self-nanoemulsifying drug delivery system (S-SNEDDS) for a water-insoluble oily drug, 1-palmitoyl-2-linoleoyl-3-acetyl-rac-glycerol (PLAG) with improved stability and oral bioavailability, numerous S-SNEDDS were prepared with surfactant, hydrophilic polymer, antioxidant, and calcium silicate (porous carrier) using the spray-drying method. Their physicochemical properties were evaluated using emulsion droplet size analysis, SEM and PXRD. Moreover, the solubility, dissolution, stability, and pharmacokinetics of the selected S-SNEDDS were assessed compared with the drug and a commercial soft capsule. Sodium lauryl sulfate (SLS) and hydroxypropyl methylcellulose (HPMC) with the highest drug solubility were selected as surfactant and hydrophilic polymer, respectively. Among the antioxidants tested, only butylated hydroxyanisole (BHA) could completely protect the drug from oxidative degradation. The S-SNEDDS composed of PLAG/SLS/HPMC/BHA/calcium silicate at a weight ratio of 1: 0.25: 0.1: 0.0002: 0.5 provided an emulsion droplet size of less than 300 nm. In this S-SNEDDS, the drug and other ingredients might exist in the pores of carrier and attach onto its surface. It considerably improved the drug stability (about 100 vs. 70%, 60 °C for 5 d) and dissolution (about 80 vs. 20% in 60 min) compared to the commercial soft capsule. Moreover, the S-SNEDDS gave higher AUC, Cmax, and Tmaxvalues than the commercial soft capsule; in particular, the former improved the oral bioavailability of PLAG by about 3-fold. Our results suggested that this S-SNEDDS provided excellent stability and oral bioavailability of PLAG. Thus, this S-SNEDDS would be recommended as a powerful oral drug delivery system for an oily drug, PLAG. [ABSTRACT FROM AUTHOR]

Abstract: Ability of any formulation to keep the drug in solubilized form in vivo is essential for bioavailability (BA) enhancement rather than the solubility of drug in the formulation vehicle/matrix itself. Besides, utilization of an excess amount of surfactants/co-surfactants to solubilize the drug in the lipid formulation poses potential pharmaceutical as well as health problems. To address this problem, self-emulsifying phospholipid suspension (SEPS) consisting of high amount of phospholipid (an endogenous lipid with efficient in vivo emulsification capability) and relatively low amount of surfactant/co-surfactant has been proposed to enhance the bioavailability (BA) of lutein. In this study, the ability of SEPS formulation to enhance the BA of lutein was assessed from three SEPS formulations with various amounts of phospholipid (SEPS-0, SEPS-I, and SEPS-II with 0mg, 250mg, and 500mg of Phosal® 53 MCT, respectively) in beagle dogs following a single oral administration of lutein equivalent to 100mg, and were compared with commercial formulation (CF). In addition, the retinal accumulation of lutein in Sprague Dawley (SD) rats’ eyes from SEPS-II formulation (lutein dose of 100mg/kg/day) was investigated following single daily oral administration for a period of 14 days. CF and placebo (vegetable oil without lutein) were also administered for the same period of time and were compared with the SEPS-II formulation. In the relative BA study in beagle dogs, no significant differences were observed between the pharmacokinetic (PK) parameters of formulation SEPS-O and CF. However, the C max in comparison to CF was 3.70 folds and 11.76 folds higher for SEPS-I and SEPS-II, respectively. Relative BA compared to CF was 178.88% and 473.13% for SEPS-I and SEPS-II, respectively. The retinal lutein accumulation was 0.91±0.31ng/g, 3.45±1.63ng/g, and 14.72±2.02ng/g for placebo, CF, and SEPS-II, respectively. This enhancement was about 16.1 folds and 4.27 folds compared to placebo and CF, respectively. The relative BA study in dogs and retinal accumulation study in rats demonstrated the excellent ability of SEPS to enhance the BA of lutein. For this reason, SEPS containing lutein could be a promising lipid based delivery system for the prevention of ocular diseases. [Copyright &y& Elsevier]