Search

Aims: The rePOT (proximal optimisation technique) sequence proved significantly more effective than final kissing balloon (FKB) with two drug-eluting stents (DES) in a bench test. We sought to validate efficacy experimentally in a large range of latest-generation DES., Methods and Results: On left main fractal coronary bifurcation bench models, five samples of each of the six main latest-generation DES (Coroflex ISAR, Orsiro, Promus PREMIER, Resolute Integrity, Ultimaster, XIENCE Xpedition) were implanted on rePOT (initial POT, side branch inflation, final POT). Proximal elliptical ratio, side branch obstruction (SBO), stent overstretch and strut malapposition were quantified on 2D and 3D OCT. Results were compared to FKB with Promus PREMIER. Whatever the design, rePOT maintained vessel circularity compared to FKB: elliptical ratio, 1.02±0.01 to 1.04±0.01 vs. 1.26±0.02 (p<0.05). Global strut malapposition was much lower: 2.6±1.4% to 0.1±0.2% vs. 40.4±8.4% for FKB (p<0.05). However, only Promus PREMIER and XIENCE Xpedition achieved significantly less SBO: respectively, 5.6±3.5% and 10.0±5.3% vs. 23.5±5.7% for FKB (p<0.05)., Conclusions: Platform design differences had little influence on the excellent results of rePOT versus FKB. RePOT optimised strut apposition without proximal elliptical deformation in the six main latest-generation DES. Thickness and design characteristics seemed relevant for optimising SBO.

Background and Objectives: DES thrombosis may be triggered by different mechanisms that are difficult to identify by angiography alone. This work aimed to investigate and compare the characteristics of stent thrombosis (ST) between 1st- and 2nd-generation drug-eluting stents (DES) among a large cohort of patients explored by optical coherence tomography (OCT)., Methods and Results: The PESTO study was a prospective national registry involving 29 French catheterization facilities. Patients with acute coronary syndromes were prospectively screened for presence of definite ST and analyzed by OCT after culprit lesion deocclusion. The analysis involved 71 subjects including 34 patients with 1st-generation DES (DES1G) and 35 patients with 2nd-generation DES (DES2G). Most patients (80%) presented with very late stent thrombosis. The median time between initial PCI and ST was longer in DES1G than DES2G patients (3.8 [2.6-6.5] years vs. 1.1 [0.04-2.3] years, p<0.0001). OCT identified an underlying morphological abnormality in 96% of the cases. Significant malapposition was the main abnormality observed either in DES1G (26%) or DES2G patients (35%). Ruptured neoatherosclerotic lesions were more frequently observed with DES1G than with DES2G (26% vs. 3%, p=0.008). There was no significant difference in percentage of malapposed struts and uncovered struts between groups., Conclusions: In this registry, DES thrombosis mainly occurred ≥1year after initial PCI. OCT identified a mechanical abnormality in the vast majority of the cases. Similar causes were observed between DES1G and DES2G, but neoatherosclerotic lesions were more common in DES1G., (Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.)

Objectives: The aim of this fractal bifurcation bench study was to compare provisional bifurcation stenting with a "re-POT" sequence, comprising a proximal optimizing technique (POT), side branch inflation, and final POT, between a bioresorbable vascular scaffold (BVS) and a metallic stent., Background: Re-POT proved significantly better than kissing balloon inflation in maintaining circular geometry without overstretch in metal stents, while significantly reducing side branch ostium strut obstruction and global strut malapposition. This should be useful for BVSs, which are more easily breakable., Methods: Twenty left main-like and 20 left anterior descending-like fractal coronary bifurcation bench models used 10 each 2.5 × 24 mm and 3.5 × 24 mm Absorb (Ab) BVSs and 10 each 2.5 × 24 mm and 3.5 × 24 mm XIENCE Xpedition (XX) metal stents, implanted by re-POT, with optical coherence tomographic analysis at each step and micro-computed tomographic analysis of Ab devices to detect strut fracture., Results: With Ab devices, re-POT reduced percentage strut malapposition close to XX rates (0.8 ± 0.7% vs. 0.0 ± 0.0%, p < 0.05; 3.5 ± 1.7% vs. 0.3 ± 0.6%, p < 0.05), conserving proximal circularity (elliptical ratio, 1.04 vs. 1.03 and 1.04 vs. 1.04; p = NS). Mean post-re-POT proximal expansion was 0.6 ± 0.1 mm (+21.6 ± 2.1%) for 2.5-mm and 1.0 ± 0.1 mm (+23.6 ± 2.2%) for 3.5-mm Ab devices, with only 1 strut fracture (left anterior descending-like bench). Side branch ostium strut obstruction was greater with Ab scaffolds than XX stents: 41.1 ± 9.4% versus 16.4 ± 8.1% (p < 0.05) and 31.8 ± 3.2% versus 10.0 ± 5.3% (p < 0.05), respectively, for 2.5- and 3.5-mm scaffolds and stents. Ab scaffolds showed 2 ± 1% moderate but significant late recoil as of 1 h, reaching 4 ± 2% by 24 h (p < 0.05)., Conclusions: Re-POT optimized most Ab provisional bifurcation treatments, without fracture, respecting fractal geometry, and without exceeding 1.0-mm proximal differential diameter., (Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.)

Objectives: This study used a fractal bifurcation bench model to compare 6 optimization sequences for coronary bifurcation provisional stenting, including 1 novel sequence without kissing balloon inflation (KBI), comprising initial proximal optimizing technique (POT) + side-branch inflation (SBI) + final POT, called "re-POT.", Background: In provisional bifurcation stenting, KBI fails to improve the rate of major adverse cardiac events. Proximal geometric deformation increases the rate of in-stent restenosis and target lesion revascularization., Methods: A bifurcation bench model was used to compare KBI alone, KBI after POT, KBI with asymmetric inflation pressure after POT, and 2 sequences without KBI: initial POT plus SBI, and initial POT plus SBI with final POT (called "re-POT"). For each protocol, 5 stents were tested using 2 different drug-eluting stent designs: that is, a total of 60 tests., Results: Compared with the classic KBI-only sequence and those associating POT with modified KBI, the re-POT sequence gave significantly (p < 0.05) better geometric results: it reduced SB ostium stent-strut obstruction from 23.2 ± 6.0% to 5.6 ± 8.3%, provided perfect proximal stent apposition with almost perfect circularity (ellipticity index reduced from 1.23 ± 0.02 to 1.04 ± 0.01), reduced proximal area overstretch from 24.2 ± 7.6% to 8.0 ± 0.4%, and reduced global strut malapposition from 40 ± 6.2% to 2.6 ± 1.4%., Conclusions: In comparison with 5 other techniques, the re-POT sequence significantly optimized the final result of provisional coronary bifurcation stenting, maintaining circular geometry while significantly reducing SB ostium strut obstruction and global strut malapposition. These experimental findings confirm that provisional stenting may be optimized more effectively without KBI using re-POT., (Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.)