Search

The paper brings new insights into nonsymmetrical convective drying, a configuration in which stresses induce a global change of the section shape of a wooden board with five insulated faces. Two experimental devices that allow to test simultaneously “twin” wooden boards have been developed: the first board is free and its curvature is collected vs. time; the second one is constrained and the force required to keep it flat is collected vs. time. Convective drying tests have been performed on radial specimens of spruce, 5 and 15 mm thick at 45 and 65°C. The results are commented and compared with simulation runs. For this purpose, a 1-D mechanical formulation is embedded in the computational code of heat and mass transfer TransPore. The objective of the comparison between numerical and experimental results is a better understanding of the coupled phenomena and the identification of some transfer and mechanical parameters. [ABSTRACT FROM AUTHOR]

We have developed a model on drying of two tropical woods of ayous ( Triplochiton Scleroxylon ) and frake ( Terminalia Superba ) coming from Cameroon forests. Some thermophysical parameters used in the model were experimentally obtained in this work while the remaining properties were from literature. A comparison is doing between numerical results of our model, these given by the Luikov’s model and experimental data. Numerical simulation results from the developed model give close agreement with experimental results. We note that Luikov’s model not gives a satisfaction results in the non-hygroscopic domain in the case of frake. The present model can be used to explain the drying phenomenon of these two tropical species and can be applied to others species when necessary thermophysical parameters of these species are known. In a future work, it is important to integrate the influence of anatomical direction on our numerical and experimental results. [ABSTRACT FROM AUTHOR]

Energy consumption during timber drying has become an increasingly important issue, alongside conventional concerns such as quality, cost, and drying time. This paper proposes a detailed analysis of the energy consumption evolution in conventional kiln drying using a sophisticated modelling approach. The formulation of energy consumption proposed by Perré et al.[ 1 ] was embedded in a multiscale computational model to consider kiln drying of a stack of boards. The drying of each board in the stack is simulated using a full version of a heat and mass transfer code (the 1-D version of TransPore), which allows all boards to be different and facilitates consideration of wood variability, in addition to the effect of position within the stack. For simple configurations, the energy consumption predicted by this complex computational tool is in agreement with the global approach.[ 1 ] Moreover, this sophisticated model is able to account for the standard deviation of the final moisture content (MC), which allows a compromise to be struck between quality, drying time, and energy consumption. In addition, this model can also be applied to test innovative, energy-saving drying strategies with an equivalent drying quality, i.e. sorting boards of similar properties before drying, or sorting boards at the end of drying to re-dry those boards that have a final MC that is still too high. [ABSTRACT FROM AUTHOR]

Wood drying is an essential process in the wood industry. During drying, the stress developed in the boards can produce several defaults such as deformations and cracks. The use of oscillating drying conditions should reduce the drying stresses in boards by activating the mechanosorptive creep. The best way to apply this concept remains an open question in the scientific community. In this paper, the effect of oscillating conditions on variations in moisture content across the board thickness was studied using an analytical model and a numerical code, TransPore. In addition, mechanical consequences of variations in moisture content produced by oscillations were studied by non-symmetrical drying (flying wood) and loaded drying (cantilever beam test). Beech wood, the second most commonly kiln-dried hardwood after oak in France, was chosen for this study owing to its elevated shrinkage coefficient, and hence its elevated risk of drying defaults. [ABSTRACT FROM AUTHOR]

This article proposes a dual-scale computational model of wood drying in a batch lumber kiln. The stack may consist of a large number of boards (typically 100) arranged in layers. Each single board of the stack is simulated using one module of TransPore , a comprehensive computational model for heat and mass transfer in porous media. Timber variability is taken into account by a Monte-Carlo method. Such a dual-scale model allows the drying simulation of a 100-board stack to be completed in less than 30 s on a PC with a 2.8-GHz Xeon processor. Sample simulations are presented to depict the great potential and prospects of this new tool. [ABSTRACT FROM AUTHOR]