Search

Carbon-based perovskite solar cells aroused huge attention for their simple, low-cost device fabrication processing and excellent stability. However, the fully low-temperature preparation and flexibility of carbon-based perovskite solar cells remain huge challenges. Here we demonstrate the fabrication of carbon-based perovskite solar cells processed at fully low-temperature, which take thermally evaporated cadmium sulfide as efficient electron transport layer, and obtain an optimal power conversion efficiency of 13.22%. With the decoration of PCBM, the separation of charges at the interface is facilitated and the recombination is hindered, so a higher fill factor is obtained and the efficiency is further improved to 14.28%. Our devices also exhibit good long-term durability and excellent ultraviolet stability. Based on the fully low-temperature preparation process, carbon-based flexible devices are further developed with an optimal efficiency over 9% and considerable mechanical stability, which can serve as the roof-top photovoltaics and power sources for wearable devices. Image 1 • Fully low-temperature processed and flexible carbon-based PSCs with excellent efficiency and stability are demonstrated. • First use of CdS as electron transport layer for carbon-based PSCs. • With the decoration of PCBM, efficiency of the best-performing device is greatly enhanced. [ABSTRACT FROM AUTHOR]

Abstract Organic-inorganic lead halide perovskite solar cells have garnered enormous interest in scientific communities due to comparable power conversion efficiencies and solution-processed fabrication techniques. Among them, carbon-based perovskite solar cells seem to be one of the most promising candidates for addressing the stability issue while suffering from inferior efficiency or high processing temperature. Herein, we introduce low-temperature processed Zn-doped SnO 2 (below 200 °C) as an effective electron transport layer in perovskite solar cells for the first time, and demonstrate a low-temperature carbon-based device with Cu-phthalocyanine as hole transport layer. We find that Zn doping contributes to a more suitable energy level alignment and an improved conductivity for SnO 2 films. As a result, the electron transfer and extraction are enhanced and the charge recombination is suppressed. In addition, devices with Zn-doped SnO 2 have a wider depletion region, leading to an enhanced photovoltaic performance. An optimal efficiency of 17.78% can be obtained after 2 mM Zn doping. Furthermore, these devices, introducing highly stable and hydrophobic Cu-phthalocyanine and carbon, maintain almost 100% of their initial efficiencies over 1200 h in ambient air. Our study paves the way for developing highly efficient and flexible carbon-based perovskite solar cells. Graphical abstract 17.78% efficient low-temperature carbon-based planar perovskite solar cell using Zn-doped SnO 2 electron transport layer is demonstrated. Zn doping contributes to a more favorable energy level alignment, an improved conductivity and a wider depletion region, resulting in an enhanced performance. The low-temperature and solution process realize flexible perovskite solar cells. Unlabelled Image Highlights • A high efficiency of 17.78% is achieved among carbon-based perovskite solar cells. • The whole process is conducted at low temperature (below 200 °C), enabling the fabrication of flexible devices. • The low-temperature processed Zn doped SnO 2 is introduced as an electron transporting layer in perovskite solar cells. • Excellent stability is obtained by utilizing CuPc and Carbon as hole transporting layer and electrode. [ABSTRACT FROM AUTHOR]