Search

Highlights • New super insulating materials based on aerogel tecnology. • Assessment of a new insulation material based on aerogel technology compatible with historic substrates and structures in the framework of the EC Project EFFESUS. • Definition of a test procedure for the steady-state thermal performance characterization of on a large scale inhomogeneous mock-up walls with the hot box method. • Comparison among different standard procedures and simulation results. Abstract Research and development of high thermal insulation materials for the construction sector requires an accurate characterization of the wall's performance, since that is the main causes of thermal exchanges between the internal and external boundaries. This paper presents a test procedure developed within the EU Project EFFESUS for evaluating the steady-state thermal performance of a masonry wall. A large-scale mock-up of the inhomogeneous wall was tested in a guarded hot box (GHB) apparatus before and after the application of an aerogel-based material. The methodology proposed in this paper is structured in the following steps: (i) definition of the wall geometry and the percentage of stone and mortar, using walls' photographic records and geometrical surveys; (ii) precise thermal characterization of the material used; (iii) hygrothermal assessment procedure based on infrared technology (IRT) survey, gravimetric test, and monitoring of the internal relative humidity (RH); (iv) steady-state and dynamic thermal simulation; and (v) detailed set-up of the test using the data retrieved from the thermal surveys and simulations. According to the results of IRT surveys and the dynamic simulations, the mock-up was divided into thermal homogeneous parts, verifying the uniformity of the surface temperature and the heat flux in an isothermal area. This approach was validated both for low and high energy performance walls. Results show that the thermal flux was reduced to one third after the application of the aerogel. [ABSTRACT FROM AUTHOR]

When deciding on the best historic building retrofit, energy savings and thermal comfort can be quantitatively evaluated using an energy model, whereas conservation compatibility is intrinsically qualitative and reflects the perspective of the local heritage authority. We present a methodology that permits finding and comparing optimal retrofits for historic buildings in a multi-perspective and quantitative way. We use an analytic hierarchy process to quantify conservation compatibility by distilling a conservation score from the opinions of 10 experts in the field. This score, along with energy needs for heating and cooling and thermal comfort, are the three targets of a multi-objective optimization aimed at identifying optimal retrofits for a medieval building in the north of Italy, destined to become a museum. Retrofit measures considered were different kinds of external and internal envelope insulation, improvement of airtightness, replacement of windows, and ventilative cooling. The result is a portfolio of optimal retrofits that cover the whole range of conservation compatibility. We show that in the analyzed case heritage preservation is compatible with a four-fold reduction in energy needs at a high thermal comfort level. Even higher energy savings are only achievable at the cost of heritage degradation. [ABSTRACT FROM AUTHOR]